The Building Project’s Data Representations in the Automated Code Compliance Checking Process

Murat Aydın

TR EN

Bina Yönetmelik Uygunluk Kontrolü Sürecinde Bina Projesine Ait Verilerin Gösterimleri

The original article was published on April 30, 2022. https://dergipark.org.tr/en/pub/mbud/article/988508

Erratum Note

Süleyman Demirel Üniversitesi Mimarlık Bilimleri ve Uygulamaları Dergisi'nde 2022 yılında yayınlanmış “Aydın, M. (2022). The building project’s data representations in the automated code compliance checking process. Journal of Architectural Sciences and Applications, 7 (Special Issue), 1-15. DOI: https://doi.org/10.30785/mbud.988508” başlıklı makalede "Teşekkür ve Bilgi Notu" içeriğinde yazar tarafından sehven unutulan düzeltme talebi doğrultusunda "Teşekkür ve Bilgi Notu" aşağıdaki şekilde düzeltilmiştir. “Teşekkür ve Bilgi Notu” Bu makale, 27-29 Ekim 2021 tarihinde gerçekleştirilen '1. Uluslararası Mimarlık Bilimleri ve Uygulamaları Sempozyumu (1st International Architectural Sciences and Applications Symposium – IArcSAS-2021)'nda sözlü olarak sunulmuş ve sadece özeti, sempozyum kitabında yayınlanmıştır. Ayrıca, bu makale 2021 yılında Murat Aydın’ın Prof. Dr. Hakan Yaman danışmanlığında hazırlanan, İstanbul Teknik Üniversitesi Lisansüstü Eğitim Enstitüsü Mimarlık Anabilim Dalı bünyesinde tamamlanan “Türkiye’deki Konut Projeleri için BIM Tabanlı Otomatik Bina Yönetmelik Uygunluk Kontrol Modeli: BIMTRAC3” adlı doktora tez çalışmasının ekler bölümü ile ilişkilidir. Makalede ulusal ve uluslararası araştırma ve yayın etiğine uyulmuştur. Çalışmada etik kurul izni gerekmemiştir.”

Abstract

BIM, inşaat endüstrisinde bina projelerin bilgi alışverişinde en etkili platform olarak kabul edilmektedir ve çeşitli yazılımların geliştirilmesini desteklemektedir. BIM tasarımcı, mimar, mühendis, yüklenici, mal sahibi vb. gibi projede yer alan katılımcılar için bina projelerinin bina yönetmeliklerine ve standartlarına göre uygunluğunun otomatik veya yarı otomatik olarak kontrol edilmesini kolaylaştırmaktadır. Bina Yönetmelik Uygunluk Kontrolü (Automated Code Compliance Checking, ACCC) sürecinde bina projesine ait veriler iki şekilde temsil edilmektedir. Bunlar BIM modeli ve IFC veya IFCXML veri standardıdır. Bu çalışmada, ACCC sürecinde bina projesine ait verilerin BIM, IFC ve IFCXML gösterimi örnek konut projesi üzerinden anlatılmıştır. Örnek konut projesi bir katı bodrum olmak üzere toplamda 9 kattan, 8 daireden ve 2 asansörden oluşmaktadır.

Keywords

BIM (bina enformasyonu modellemesi), IFC (endüstri temel sınıfları), IFCXML, konut projesi, ACCC (bina yönetmelik uygunluk kontrolü)

Thanks

Bu makale, 27-29 Ekim 2021 tarihinde gerçekleştirilen '1. Uluslararası Mimarlık Bilimleri ve Uygulamaları Sempozyumu (1st International Architectural Sciences and Applications Symposium – IArcSAS-2021)'nda sözlü olarak sunulmuş ve sadece özeti, sempozyum kitabında yayınlanmıştır. Ayrıca, bu makale 2021 yılında Murat Aydın’ın Prof. Dr. Hakan Yaman danışmanlığında hazırlanan, İstanbul Teknik Üniversitesi Lisansüstü Eğitim Enstitüsü Mimarlık Anabilim Dalı bünyesinde tamamlanan “Türkiye’deki Konut Projeleri için BIM Tabanlı Otomatik Bina Yönetmelik Uygunluk Kontrol Modeli: BIMTRAC3” adlı doktora tez çalışmasının ekler bölümü ile ilişkilidir. Makalede ulusal ve uluslararası araştırma ve yayın etiğine uyulmuştur. Çalışmada etik kurul izni gerekmemiştir.”

The Building Project’s Data Representations in the Automated Code Compliance Checking Process

The original article was published on April 30, 2022. https://dergipark.org.tr/en/pub/mbud/article/988508

Erratum Note

In the article published in Süleyman Demirel University Journal of Architectural Sciences and Applications in 2022 (Aydın, M. (2022). The building project’s data representations in the automated code compliance checking process. Journal of Architectural Sciences and Applications, 7 (Special Issue), 1-15. DOI: https://doi.org/10.30785/mbud.988508), "Acknowledgements and Information Note" has been corrected as follows in line with the correction request in the "Acknowledgements and Information Note" content, which was inadvertently forgotten by the author. "Acknowledgments and Information Note” This article was presented orally at the 1st International Architectural Sciences and Applications Symposium (IArcSAS-2021) held on October 27-29, 2021 and only the abstract was published in the symposium book. In addition, this article is associated with the appendix section of Murat Aydın's PhD dissertation entitled “BIM Based Automatic Building Code Compliance Control Model for Residential Projects in Turkey: BIMTRAC3”, which was prepared in 2021 under the supervision of Prof. Hakan Yaman and completed at Istanbul Technical University, Graduate School of Architecture, Department of Architecture. The article complies with national and international research and publication ethics. Ethics committee permission was not required for the study."

Abstract

BIM is widely acknowledged as the most effective platform for building project information sharing in the construction sector. It aids in the creation of numerous software applications. It enables automated or semi-automated ACCC of the building projects for compliance with building regulations and standards for parties (architect, contractor, engineer, owner, designer, etc.) participating in the building production process. The data from the building project is represented in two ways in the ACCC process. These are BIM Model, and IFC or IFCXML Data Standard. In this study, the BIM, IFC, and IFCXML representations of the building project data were described using a sample housing project in the ACCC process. The sample housing project has 9 floors, 8 units, and 2 elevators.

Keywords

BIM (building information modelling), IFC (industry foundation classes), IFCXML, housing project, ACCC (automated code compliance checking)

Thanks

This article was presented orally at the 1st International Architectural Sciences and Applications Symposium (IArcSAS-2021) held on October 27-29, 2021 and only the abstract was published in the symposium book. In addition, this article is associated with the appendix section of Murat Aydın's PhD dissertation entitled “BIM Based Automatic Building Code Compliance Control Model for Residential Projects in Turkey: BIMTRAC3”, which was prepared in 2021 under the supervision of Prof. Hakan Yaman and completed at Istanbul Technical University, Graduate School of Architecture, Department of Architecture. The article complies with national and international research and publication ethics. Ethics committee permission was not required for the study."

References

Aydın, M., ve Yaman, H. (2018). Bina enformasyonu modellemesi (bim) tabanlı bina yönetmelik uygunluk kontrolü literatürüne genel bir bakış. Tasarım + Kuram, 14(25), s. 59–77. https://doi.org/10.14744/tasarimkuram.2018.25744
Aydın, M. ve Yaman, H. (2020a). Bina yönetmelik uygunluk kontrolü kavramına yönelik bir literatür taraması. Tasarım + Kuram, 16(29), s. 79–97. https://doi.org/10.14744/tasarimkuram.2020.86158
Aydın, M. ve Yaman, H. (2020b). Domain knowledge representation languages and methods for building regulations. In: Ofluoglu S., Ozener O., Isikdag U. (eds) Advances in Building Information Modeling. EBF 2019. Communications in Computer and Information Science, Vol. 1188 CCIS, pp. 101–121, Springer, Cham. https://doi.org/10.1007/978-3-030-42852-5_9
buildingSMART. (2020). buildingSMART International. https://www.buildingsmart.org
buildingSMART Türkiye. (2019). buildingSmart Türkiye. http://www.buildingsmartturkiye.org/index.php/hakkinda/buildingsmart-turkiye
Dimyadi, J., ve Amor, R. (2013). Automated Building Code Compliance Checking – Where is it at? Proceedings of the 19th World Building Congress: Construction and Society, 5-9 May, Brisbane, Australia, pp. 172–185.
Dimyadi, J., Clifton, C., Spearpoint, M., ve Amor, R. (2014). Regulatory Knowledge encoding guidelines for automated compliance audit of building engineering design. Computing in Civil and Building Engineering (2014), pp. 536–543. https://doi.org/10.1061/9780784413616.067
Ding, L., Drogemuller, R., Rosenman, M., Marchant, D., ve Gero, J. (2006). Automating code checking for building designs - DesignCheck. Clients Driving Innovation: Moving Ideas into Practice, pp. 1–16. https://ro.uow.edu.au/engpapers/4842
Fenves, S. J., Garrett, J. H., Kiliccote, H., Law, K. H., ve Reed, K. A. (1995). Computer representations of design standards and building codes: US perspective. The International Journal of Construction Information Technology, 3(1), pp. 13–34.
Graphisoft. (2018). ArchiCAD 21. https://www.graphisoft.com/archicad/

Greenwood, D., Lockley, S., Malsane, S., ve Matthews, J. (2010). Automated Compliance Checking Using Building İnformation Models. Proceedings of the Construction, Building and Real Estate Research Conference, 2-3 September, Paris, France, pp. 363–371.
IAI. (1997). Release 1.0 IFC Model Architecture. International Alliance for Interoperability. http://www.buildingsmart-tech.org/ifc/
ISO_10303-11. (1997). Product Data Representation and Exchange Description Methods: The EXPRESS Language Reference Manual. ISO - International Organization for Standardization. https://www.iso.org/standard/38047.html
Lee, H., Lee, J.-K., Park, S., ve Kim, I. (2016). Translating building legislation into a computer-executable format for evaluating building permit requirements. Automation in Construction, 71, pp. 49–61. https://doi.org/10.1016/j.autcon.2016.04.008
Martins, J. P., ve Monteiro, A. (2013). LicA: a bim based automated code-checking application for water distribution systems. Automation in Construction, 29(23), pp. 12–23. https://doi.org/10.1016/j.autcon.2012.08.008
Nawari, N. O. (2012). Automating codes conformance. Journal of Architectural Engineering, 18(4), pp. 315–323. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000049
Nawari, N. O., ve Alsaffar, A. (2015). Understanding computable building codes. Civil Engineering and Architecture, 3(6), pp. 163–171. https://doi.org/10.13189/cea.2015.030601
NBIMS-US. (2015). National BIM Standard–United States Version 3. National Inst. of Building Sciences Washington, DC. https://www.nibs.org/news/242663/buildingSMART-alliance-Releases-NBIMS-US-Version-3.html
Shih, S.-Y., Sher, W. ve Giggins, H. (2013). Assessment of the building code of Australia to inform the development of BIM-enabled code checking system. Proceedings of the 19th World Building Congress: Construction and Society, 5-9 May, Brisbane, Australia, pp. 1–12.

Details

Primary Language

English

Subjects

Architecture

Journal Section

Erratum

Authors

Murat Aydın ^*
0000-0002-3928-2936
Türkiye

Publication Date

July 28, 2025

Submission Date

July 28, 2025

Acceptance Date

-

Published in Issue

Year 2025 Volume: 10 Number: 1

IZ

https://izlik.org/JA34AC28KB

APA

Aydın, M. (2025). The Building Project’s Data Representations in the Automated Code Compliance Checking Process. Journal of Architectural Sciences and Applications, 10(1), 672-672. https://izlik.org/JA34AC28KB

AMA

1.Aydın M. The Building Project’s Data Representations in the Automated Code Compliance Checking Process. JASA. 2025;10(1):672-672. https://izlik.org/JA34AC28KB

Chicago

Aydın, Murat. 2025. “The Building Project’s Data Representations in the Automated Code Compliance Checking Process”. Journal of Architectural Sciences and Applications 10 (1): 672-72. https://izlik.org/JA34AC28KB.

EndNote

Aydın M (July 1, 2025) The Building Project’s Data Representations in the Automated Code Compliance Checking Process. Journal of Architectural Sciences and Applications 10 1 672–672.

IEEE

[1]M. Aydın, “The Building Project’s Data Representations in the Automated Code Compliance Checking Process”, JASA, vol. 10, no. 1, pp. 672–672, July 2025, [Online]. Available: https://izlik.org/JA34AC28KB

ISNAD

Aydın, Murat. “The Building Project’s Data Representations in the Automated Code Compliance Checking Process”. Journal of Architectural Sciences and Applications 10/1 (July 1, 2025): 672-672. https://izlik.org/JA34AC28KB.

JAMA

1.Aydın M. The Building Project’s Data Representations in the Automated Code Compliance Checking Process. JASA. 2025;10:672–672.

MLA

Aydın, Murat. “The Building Project’s Data Representations in the Automated Code Compliance Checking Process”. Journal of Architectural Sciences and Applications, vol. 10, no. 1, July 2025, pp. 672-, https://izlik.org/JA34AC28KB.

Vancouver

1.Murat Aydın. The Building Project’s Data Representations in the Automated Code Compliance Checking Process. JASA [Internet]. 2025 Jul. 1;10(1):672-. Available from: https://izlik.org/JA34AC28KB

The Building Project’s Data Representations in the Automated Code Compliance Checking Process

Bina Yönetmelik Uygunluk Kontrolü Sürecinde Bina Projesine Ait Verilerin Gösterimleri

Erratum Note

Abstract

Keywords

Thanks

The Building Project’s Data Representations in the Automated Code Compliance Checking Process

Erratum Note

Abstract

Keywords

Thanks

References

Details

Primary Language

Subjects

Journal Section

Authors

Publication Date

Submission Date

Acceptance Date

Published in Issue

IZ

Cite

JASA JOURNAL TAG / MBUD DERGİ KÜNYESİ