PLANARCH - Design and Planning Research

PLANARCH - Design and Planning Research is a scientific, open access, online-only periodical published in accordance with independent, unbiased, and double-blinded peer-review principles. The journal is official publication of the Atatürk University, Faculty of Architecture and Design and published biannually in March and September. The publication languages of the journal are Turkish and English.

PLANARCH - Design and Planning Research aims to contribute to the literature by publishing manuscripts at the highest scientific level in architecture, planning and design. The journal publishes original articles, and reviews that are prepared in accordance with ethical guidelines. The scope of the journal includes but not limited to relevant to the topics of planning and design, conservation and renovation, building, technology and design of building systems, industrial product design and technologies, and all other related interdisciplinary theoretical, implementation and historical researches.

The target audience of the journal includes researchers and specialists who are interested or working in all fields of architecture, planning and design.

PLANARCH - Design and Planning Research is currently indexed in TUBITAK ULAKBIM TR Index and China National Knowledge Infrastructure (CNKI).

The editorial and publication processes of the journal are shaped in accordance with the guidelines of the Council of Science Editors (CSE), Committee on Publication Ethics (COPE), European Association of Science Editors (EASE), and National Information Standards Organization (NISO). The journal is in conformity with the Principles of Transparency and Best Practice in Scholarly Publishing (doaj.org/bestpractice).

All expenses of the journal are covered by the Atatürk University. Processing and publication are free of charge with the journal. No fees are requested from the authors at any point throughout the evaluation and publication process. All manuscripts must be submitted via the online submission system, which is available at https://planningdesign-ataunipress.org/. The journal guidelines, technical information, and the required forms are available on the journal’s web page.

Disclaimer
Statements or opinions expressed in the manuscripts published in the journal reflect the views of the author(s) and not the opinions of the editors, editorial board, and/or publisher; the editors, editorial board, and publisher disclaim any responsibility or liability for such materials.

Open Access Statement
PLANARCH - Design and Planning Research is an open access publication, and the journal’s publication model is based on Budapest Access Initiative (BOAI) declaration. All published content is available online, free of charge at https://planningdesign-ataunipress.org/. Authors retain the copyright of their published work in the PLANARCH - Design and Planning Research. The journal’s content is licensed under a Creative Commons Attribution-NonCommercial (CC BY-NC) 4.0 International License which permits third parties to share and adapt the content for non-commercial purposes by giving the appropriate credit to the original work.

Editor in Chief: Fatma Zehra ÇAKICI
Address: Atatürk University, Faculty of Architecture and Design, Erzurum, Turkey
E-mail: fzehra.cakici@atauni.edu.tr

Publisher: Atatürk University
Address: Atatürk University, Yakutiye, Erzurum, Turkey

Publishing Service: AVES
Address: Büyükdere Cad., 105/9 34394 Şişli, İstanbul, Turkey
Phone: +90 212 217 17 00
E-mail: info@avesyayincilik.com
Webpage: www.avesyayincilik.com

Author Online Submission Demo

Journal of ATA Planning and Design is a scientific, open access, online-only periodical published in accordance with independent, unbiased, and double-blinded peer-review principles. The journal is official publication of the Atatürk University, Faculty of Architecture and Design and published biannually in March and September. The publication languages of the journal are Turkish and English.

Journal of ATA Planning and Design aims to contribute to the literature by publishing manuscripts at the highest scientific level in architecture, planning and design. The journal publishes original articles, and reviews that are prepared in accordance with ethical guidelines. The scope of the journal includes but not limited to relevant to the topics of planning and design, conservation and renovation, building, technology and design of building systems, industrial product design and technologies, and all other related interdisciplinary theoretical, implementation and historical researches.

The target audience of the journal includes researchers and specialists who are interested or working in all fields of architecture, planning and design.

EDITORIAL AND PUBLICATION PROCESS
The editorial and publication processes of the journal are shaped in accordance with the guidelines of the Council of Science Editors (CSE), the Committee on Publication Ethics (COPE), the European Association of Science Editors (EASE), and National Information Standards Organization (NISO). The journal conforms to the Principles of Transparency and Best Practice in Scholarly Publishing (doaj.org/bestpractice).

Originality, high scientific quality, and citation potential are the most important criteria for a manuscript to be accepted for publication. Manuscripts submitted for evaluation should not have been previously presented or already published in an electronic or printed medium. The journal should be informed of manuscripts that have been submitted to another journal for evaluation and rejected for publication. The submission of previous reviewer reports will expedite the evaluation process. Manuscripts that have been presented in a meeting should be submitted with detailed information on the organization, including the name, date, and location of the organization.

PEER REVIEW PROCESS
Manuscripts submitted to Journal of ATA Planning and Design will go through a double-blind peer-review process. Each submission will be reviewed by at least two external, independent peer reviewers who are experts in their fields in order to ensure an unbiased evaluation process. The editorial board will invite an external and independent editor to manage the evaluation processes of manuscripts submitted by editors or by the editorial board members of the journal. The Editor in Chief is the final authority in the decision-making process for all submissions.

ETHICAL GUIDELINES
All authors who submit articles to the journal are expected to comply with universal ethical principles in their studies. These principles are; accuracy in scientific method, data and analysis accuracy, corporate honesty, impartiality and social responsibility.

PLAGIARISM AND ETHICAL MISCONDUCT
Journal of ATA Planning and Design is extremely sensitive about plagiarism. All submissions are screened by a similarity detection software (iThenticate by CrossCheck) at any point during the peer-review and/or production process.

When you are discussing others' (or your own) previous work, please make sure that you cite the material correctly in every instance.

Authors are strongly recommended to avoid any form plagiarism and ethical misconduct that are exemplified below.

Self- plagiarism (text-recycling): Overlapping sections or sentences with the author’s previous publications without citing them. Even if you are the author of the phrases or sentences, the text should not have unacceptable similarity with the previously published data.
Salami slicing: Using the same data of a research into several different articles. Reporting the same hypotheses, population, and methods of a study is into different papers is not acceptable.
Data Fabrication: It is the addition of data that never occurred during the gathering of data or the experiments. Results and their interpretation must be based on the complete data sets and reported accordingly.
Data Manipulation/Falsification: It means manipulating research data with the intention of giving a false impression. This includes manipulating images (e.g. micrographs, gels, radiological images), removing outliers or ‘inconvenient’ results, changing data points, etc.

In the event of alleged or suspected research misconduct, e.g., plagiarism, citation manipulation, and data falsification/fabrication, the Editorial Board will follow and act according to COPE flowcharts.

AUTHORSHIP
Each person listed as an author should fulfill the authorship criteria recommended by the International Committee of Medical Journal Editors (ICMJE - www.icmje.org). The ICMJE recommends that authorship is based on the following four criteria:

1. Substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data for the work; AND
2. Drafting the work or revising it critically for important intellectual content; AND
3. Final approval of the version to be published; AND
4. Agreement to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.

In addition to being accountable for the parts of the work he/she has done, an author should be able to identify which co-authors are responsible for specific other parts of the work. Also, authors should have confidence in the integrity of the contributions of their co-authors.

All those designated as authors should meet all four criteria for authorship, and all who meet the four criteria should be identified as authors. Those who do not meet all four criteria should be acknowledged in the title page of the manuscript.

Journal of ATA Planning and Design requires corresponding authors to submit a signed and scanned version of the Copyright Agreement and Acknowledgement of Authorship form (available for download at https://planningdesign-ataunipress.org/) during the initial submission process to act appropriately on authorship rights and to prevent ghost or honorary authorship. If the editorial board suspects a case of “gift authorship,” the submission will be rejected without further review. As part of the submission of the manuscript, the corresponding author should also send a short statement declaring that he/she accepts to undertake all the responsibility for authorship during the submission and review stages of the manuscript.

CHANGE OF AUTHORSHIP
Journal of ATA Planning and Design reviews the authorship according to the author’s declaration in the Title Page, thus it is the authors responsibility to send the final order of the complete author names. Requests in the change of authorship (e.g. removal/addition of the authors, change in the order etc) after submission are subject to editorial approval. Editorial Board will investigate this kind of cases and act following COPE flowcharts.

Change of authorship requests should be submitted to the Editorial Office with an official letter stating the reasons of the change. The letter must be signed by all authors and include their approval on the change in authorship. If the request is approved by the Editorial Board, authors need to submit a new Copyright Agreement Form according to the final order list.

DECLARATION OF INTEREST
Journal of ATA Planning and Design requires and encourages the authors and the individuals involved in the evaluation process of submitted manuscripts to disclose any existing or potential conflicts of interests, including financial, consultant, and institutional, that might lead to potential bias or a conflict of interest. Any financial grants or other support received for a submitted study from individuals or institutions should be disclosed to the Editorial Board. To disclose a potential conflict of interest, the ICMJE Potential Conflict of Interest Disclosure Form should be filled in and submitted by all contributing authors. The journal’s Editorial Board resolves cases of a potential conflict of interest of the editors, authors, or reviewers within the scope of COPE and ICMJE guidelines.

APPEALS AND COMPLAINT
The Editorial Board of the journal handles all appeal and complaint cases within the scope of COPE guidelines. In such cases, authors should get in direct contact with the editorial office regarding their appeals and complaints. When needed, an ombudsperson may be assigned to resolve claims that cannot be resolved internally. The Editor in Chief is the final authority in the decision-making process for all appeals and complaints.

COPYRIGHT AND LICENSE
Journal of ATA Planning and Design requires each submission to be accompanied by a Copyright Agreement and Acknowledgement of Authorship form (available for download at https://planningdesign-ataunipress.org/). By signing this form, authors retain the copyright of their work and agree that the article, if accepted for publication by the Journal of ATA Planning and Design will be licensed under a Creative Commons Attribution-NonCommercial (CC BY-NC) 4.0 International License which permits third parties to share and adapt the content for non-commercial purposes by giving the appropriate credit to the original work.

When using previously published content, including figures, tables, or any other material in both print and electronic formats, authors must obtain permission from the copyright holder. Legal, financial and criminal liabilities in this regard belong to the author(s).

DISCLAIMER
Statements or opinions expressed in the manuscripts published in Journal of ATA Planning and Design reflect the views of the author(s) and not the opinions of the editors, the editorial board, or the publisher; the editors, the editorial board, and the publisher disclaim any responsibility or liability for such materials. The final responsibility regarding the published content rests with the authors.

MANUSCRIPT PREPARATION
Manuscripts can only be submitted through the journal’s online manuscript submission and evaluation system, available at https://planningdesign-ataunipress.org/. Manuscripts submitted via any other medium and submissions by anyone other than one of the authors will not be evaluated.

Manuscripts submitted to the journal will first go through a technical evaluation process where the editorial office staff will ensure that the manuscript has been prepared and submitted in accordance with the journal’s guidelines. Submissions that do not conform to the journal’s guidelines will be returned to the submitting author with technical correction requests.

Authors are required to submit the following:
· Copyright Agreement and Acknowledgement of Authorship Form,
(should be filled in by all contributing authors) during the initial submission. These forms are available for download at https://planningdesign-ataunipress.org/.

Preparation of the Manuscript
Title page: A separate title page should be submitted with all submissions and this page should include:
· The full title of the manuscript as well as a short title (running head) of no more than 50 characters,
· Name(s), affiliations, highest academic degree(s), and ORCID IDs of the author(s),
· Grant information and detailed information on the other sources of support,
· Name, address, telephone (including the mobile phone number), and email address of the corresponding author,
· Acknowledgment of the individuals who contributed to the preparation of the manuscript but who do not fulfill the authorship criteria.

Abstract: An abstract should be submitted with all submissions except for Letters to the Editor. The abstract of Research Articles should be unstructured. Please check Table 1 below for word count specifications.

Keywords: Each submission must be accompanied by a minimum of three to a maximum of five keywords for subject indexing at the end of the abstract. The keywords should be listed in full without abbreviations.

Manuscript Types
Research Articles: This is the most important type of article since it provides new information based on original research. Acceptance of original papers will be based upon the originality and importance of the investigation. The main text of original articles should be structured with Introduction, Methods, Results, Discussion, Conclusion and Recommendations subheadings. Please check Table 1 for the limitations for Original Articles.

Review Articles: Reviews prepared by authors who have extensive knowledge on a particular field and whose scientific background has been translated into a high volume of publications with a high citation potential are welcomed. These authors may even be invited by the journal. Reviews should describe, discuss, and evaluate the current level of knowledge of a topic in clinical practice and should guide future studies. The subheadings of the review articles should be planned by the authors. However, each review article should include an “Introduction” and a “Conclusion” section. Please check Table 1 for the limitations for Review Articles.

Table 1. Limitations for each manuscript type

*Word limit should not include the abstract, references, tables, and figure legends.

Tables
Tables should be included in the main document, presented after the reference list, and they should be numbered consecutively in the order they are referred to within the main text. A descriptive title must be placed above the tables in title case in italics. Abbreviations used in the tables should be defined below the tables by footnotes (even if they are defined within the main text). Tables should be created using the “insert table” command of the word processing software and they should be arranged clearly to provide easy reading. Data presented in the tables should not be a repetition of the data presented within the main text but should be supporting the main text.

Table Examples in APA Format

Source: Sample Tables, APA accessed https://apastyle.apa.org/style-grammar-guidelines/tables-figures/sample-tables

Figures and Figure Legends
Figures, graphics, and photographs should be submitted as separate files (in TIFF or JPEG format) through the submission system. The files should not be embedded in a Word document or the main document. When there are figure subunits, the subunits should not be merged to form a single image. Each subunit should be submitted separately through the submission system. Images should not be labeled (a, b, c, etc.) to indicate figure subunits. Thick and thin arrows, arrowheads, stars, asterisks, and similar marks can be used on the images to support figure legends. Like the rest of the submission, the figures too should be blind. Any information within the images that may indicate an individual or institution should be blinded. The minimum resolution of each submitted figure should be 300 DPI. To prevent delays in the evaluation process, all submitted figures should be clear in resolution and large in size (minimum dimensions: 100 × 100 mm). Figure legends should be listed at the end of the main document.

All acronyms and abbreviations used in the manuscript should be defined at first use, both in the abstract and in the main text. The abbreviation should be provided in parentheses following the definition.


All references, tables, and figures should be referred to within the main text, and they should be numbered consecutively in the order they are referred to within the main text.

Limitations, drawbacks, and the shortcomings of original articles should be mentioned in the Discussion section before the conclusion paragraph.


References
Both in-text citations and the references must be prepared according to the APA Manual Seventh Edition.

While citing publications, preference should be given to the latest, most up-to-date publications. Authors are responsible for the accuracy of references. In the main text of the manuscript, references should be cited by author’s name and the publication year in parenthesis. In the case of direct citations in the main text, only publication year should be stated in parenthesis after the name of the author. Please see below the examples.

Reference List
The reference styles for different types of publications are presented in the following examples.

Journal Article: Klimonske, R., & Palmer, S. (1993). The ADA and the hiring process in organizations. Consulting Psychology Journal: Practice and Research, 45(2), 10-36.

Journal Article with more than one author: Jerrentrup, A., Mueller, T., Glowalla, U., Herder, M., Henrichs, N., Neubauer, A., & Schaefer, J. R. (2018). Teaching medicine with the help of “Dr. House.” PLoS ONE, 13(3), Article e0193972. https://doi.org/10.1371/journal.pone.0193972

Article in Turkish: Mutlu, B., & Savaşer, S. (2007). Çocuğu ameliyat sonrası yoğun bakımda olan ebeveynlerde stres nedenleri ve azaltma girişimleri [Source and intervention reduction of stress for parents whose children are in intensive care unit after surgery]. Istanbul University Florence Nightingale Journal of Nursing, 15(60), 179–182.

Books
By a Single Author: Kimmel, M. S. (2007). The gendered society. Oxford University Press.
By Two or More Authors: DiFonzo, N., & Bordia, P. (2007). Rumor psychology: Social and organizational approaches. American Psychological Association.
By a Corporate (Group) Author: American Sociological Association. (1975). Approaches to the study of social structure. Free Press.
Edited Book : Rhodewalt, F. (Ed.). (2008). Personality and social behavior. Psychology Press.
Book Chapter with Editor(s): McCormack, B., McCance, T., & Maben, J. (2013). Outcome evaluation in the development of person-centred practice. In B. McCormack, K. Manley, & A. Titchen (Eds.), Practice development in nursing and healthcare (pp. 190-211). John Wiley & Sons.

Dissertation or Thesis: Valentin, E. R. (2019, Summer). Narcissism predicted by Snapchat selfie sharing, filter usage, and editing [Master's thesis, California State University Dominguez Hills]. CSU ScholarWorks. https://scholarworks.calstate.edu/concern/theses/3197xm925?locale=en
No Author: The universal declaration of human rights. (1974). U.S. Catholic Conference, Division of Latin America.
Web sites: Sparks, Dana. (2018, September 12). Mayo mindfulness: Practicing mindfulness exercises. Mayo Clinic.

In the seventh edition, up to 20 authors should now be included in a reference list entry. For sources with more than 20 authors, after the 19th listed author, any additional authors' names are replaced with an ellipsis (…) followed by the final listed author's name:
Author, A. A., Author, B. B., Author, C. C., Author, D. D., Author, E. E., Author, F. F., Author, G. G., Author, H. H., Author, I. I., Author, J. J., Author, K. K., Author, L. L., Author, M. M., Author, N. N., Author, O. O., Author, P. P., Author, Q. Q., Author, R. R., Author, S. S., . . . Author, Z. Z.

REVISIONS
When submitting a revised version of a paper, the author must submit a detailed “Response to the reviewers” that states point by point how each issue raised by the reviewers has been covered and where it can be found (each reviewer’s comment, followed by the author’s reply and line numbers where the changes have been made) as well as an annotated copy of the main document. Revised manuscripts must be submitted within 30 days from the date of the decision letter. If the revised version of the manuscript is not submitted within the allocated time, the revision option may be canceled. If the submitting author(s) believe that additional time is required, they should request this extension before the initial 30-day period is over.

Accepted manuscripts are copy-edited for grammar, punctuation, and format by professional language editors. Once the publication process of a manuscript is completed, it is published online on the journal’s webpage as an ahead-of-print publication before it is included in its scheduled issue. A PDF proof of the accepted manuscript is sent to the corresponding author and their publication approval is requested within 2 days of their receipt of the proof.

Editor in Chief: Fatma Zehra ÇAKICI
Address: Atatürk University, Faculty of Architecture and Design, Erzurum, Turkey
E-mail: fzehra.cakici@atauni.edu.tr

Publisher: Atatürk University
Address: Atatürk University, Yakutiye, Erzurum, Turkey

Publishing Service: AVES
Address: Büyükdere Cad., 105/9 34394 Şişli, İstanbul, Turkey
Phone: +90 212 217 17 00
E-mail: info@avesyayincilik.com
Webpage: www.avesyayincilik.com

ETHICAL GUIDELINES
The authors are expected to submit researches that comply with the general ethical principles which include; scientific integrity, objectivity, collegiality, data integrity, institutional integrity and social responsibility.

The Editorial Board of the journal handles all appeal and complaint cases within the scope of COPE guidelines. In such cases, authors should get in direct contact with the editorial office regarding their appeals and complaints. When needed, an ombudsperson may be assigned to resolve cases that cannot be resolved internally. The Editor in Chief is the final authority in the decision-making process for all appeals and complaints.

ERRATUM
The correction requests submitted by the authors are reviewed by the Editorial Board and the corrections are applied based on the decision of the Editorial Board. In case of corrections in the published text, the readers are informed by publishing the Erratum text in the number following the correction. The edited article is updated on the journal web page and in the indexes when the journal is scanned.

PLAGIARISM AND ETHICAL MISCONDUCT
PLANARCH - Design and Planning Research is extremely sensitive about plagiarism. All submissions are screened by a similarity detection software (iThenticate by CrossCheck) at any point during the peer-review and/or production process.

Even if you are the author of the phrases or sentences, the text should not have unacceptable similarity with the previously published data. When you are discussing others' (or your own) previous work, please make sure that you cite the material correctly in every instance.

Authors are strongly recommended to avoid any form plagiarism and ethical misconduct that are exemplified below.

Self- plagiarism (text-recycling): Overlapping sections or sentences with the author’s previous publications without citing them. Even if you are the author of the phrases or sentences, the text should not have unacceptable similarity with the previously published data.
Salami slicing: Using the same data of a research into several different articles. Reporting the same hypotheses, population, and methods of a study is into different papers is not acceptable.
Data Fabrication: It is the addition of data that never occurred during the gathering of data or the experiments. Results and their interpretation must be based on the complete data sets and reported accordingly.
Data Manipulation/Falsification: It means manipulating research data with the intention of giving a false impression. This includes manipulating images (e.g. micrographs, gels, radiological images), removing outliers or ‘inconvenient’ results, changing data points, etc.

In the event of alleged or suspected research misconduct, e.g., plagiarism, citation manipulation, and data falsification/fabrication, the Editorial Board will follow and act according to COPE flowcharts.

PREPRINT
PLANARCH - Design and Planning Research does not consider preprint publications as prior publication. In other words, authors are allowed to present and discuss their findings on a non-commercial preprint server before submission to a journal.

Authors must provide the journal with the pre-print server deposition of their article accompanying its DOI during initial submission.

If the article is published in the PLANARCH - Design and Planning Research it is the responsibility of the authors to update the archived preprint and link it to the published version of the article.

AUTHORSHIP
Being an author of a scientific article mainly indicates a person who has a significant contribution to the article and shares the responsibility and accountability of that article. To be defined as an author of a scientific article, researchers should fulfill below criteria:
Making a significant contribution to the work in all or some of the following phases: Research conception or design, acquisition of data, analysis and interpretation.
Drafting, writing or revising the manuscript
Agreeing on the final version of the manuscript and the journal which it will be submitted
Taking responsibility and accountability of the content of the article
Outside the above mentioned authorship criteria, any other form of specific contribution should be stated in the Acknowledgement section.

In addition to being accountable for the parts of the work he/she has done, an author should be able to identify which co-authors are responsible for specific other parts of the work. Also, authors should have confidence in the integrity of the contributions of their co-authors.

If an article is written by more than one person, one of the co-authors should be chosen as the corresponding author for handling all the correspondences regarding the article. Before submission, all authors should agree on the order of the authors and provide their current affiliations and contact details. Corresponding author is responsible for ensuring the correctness of these information.

PLANARCH - Design and Planning Research requires corresponding authors to submit a signed and scanned version of the Copyright Agreement and Acknowledgement of Authorship form (available for download at https://planningdesign-ataunipress.org/) during the initial submission process to act appropriately on authorship rights and to prevent ghost or honorary authorship. If the editorial board suspects a case of “gift authorship,” the submission will be rejected without further review. As part of the submission of the manuscript, the corresponding author should also send a short statement declaring that he/she accepts to undertake all the responsibility for authorship during the submission and review stages of the manuscript.

CHANGE OF AUTHORSHIP
PLANARCH - Design and Planning Researchn reviews the authorship according to the author’s declaration in the Title Page, thus it is the authors responsibility to send the final order of the complete author names. Requests in the change of authorship (e.g. removal/addition of the authors, change in the order etc) after submission are subject to editorial approval. Editorial Board will investigate this kind of cases and act following COPE flowcharts.

Change of authorship requests should be submitted to the Editorial Office with an official letter stating the reasons of the change. The letter must be signed by all authors and include their approval on the change in authorship. If the request is approved by the Editorial Board, authors need to submit a new Copyright Agreement Form according to the final order list.

APPEALS AND COMPLAINT
The Editorial Board of the journal handles all appeal and complaint cases within the scope of COPE guidelines. In such cases, authors should get in direct contact with the editorial office regarding their appeals and complaints. When needed, an ombudsperson may be assigned to resolve claims that cannot be resolved internally. The Editor in Chief is the final authority in the decision-making process for all appeals and complaints.

PLANARCH - Design and Planning Research is an open access publication, and the journal’s publication model is based on Budapest Access Initiative (BOAI) declaration. All published content is available online, free of charge at https://planningdesign-ataunipress.org/. Authors retain the copyright of their published work in the PLANARCH - Design and Planning Research. The journal’s content is licensed under a Creative Commons Attribution-NonCommercial (CC BY-NC) 4.0 International License which permits third parties to share and adapt the content for non-commercial purposes by giving the appropriate credit to the original work.