Volume: 6 Issue: 1, 7/3/23

Year: 2023

Techno-Science aims to publish quality research and review articles on engineering and life sciences as 2 issues per year.

The journal publishes research or review papers in the fields of applied science and technology such as Physics, Biology, Mathematics, Statistics, Chemistry and Chemical Engineering, Environmental Sciences and Engineering, Civil Engineering, Earth and Atmospheric Sciences, Electrical and Electronical Engineering, Computer Science and Informatics, Materials Sciences and Engineering, Mechanical Engineering, Mining Engineering, Industrial Engineering, Aeronautics and Astronautics, Architecture, Health Sciences, Pharmaceutical Sciences, Business, Economy and so on. 

Author Guidelines

 


Template

download


Copyright

download

 


AUTHOR GUIDELINES

 

All manuscripts must be in English. Pages should be numbered sequentially. The maximum length of contributions is 10 pages (short manuscripts should be less than 4 pages). Longer contributions will only be accepted if authors provide justification in a cover letter which must be added at submission as a supplementary file.

 

Please add a cover letter as a supplementary file stating the following information about the submitted paper:

 

1.     Paper title, list of authors

2.     The type of your paper: original scientific paper (1.01), review scientific paper (1.02) or short scientific paper (1.03).

3.     A declaration that your paper is unpublished work, not considered elsewhere for publication.

4.     State the value of the paper or its practical, theoretical and scientific implications. What is new in the paper with respect to the state-of-the-art in the published papers?

5.     We kindly ask you to suggest at least two reviewers for your paper and give us their names and contact information (email).

 

Every manuscript submitted to the Techno-Science undergoes the course of the peer-review process.

 

THE FORMAT OF THE MANUSCRIPT

 

The manuscript should be written in the following format:

 

·       A title, which adequately describes the content of the manuscript.

·       An Abstract should not exceed 250 words. The Abstract should state the principal objectives and the scope of the investigation, as well as the methodology employed. It should summarize the results and state the principal conclusions.

·       4-6 significant key words should follow the abstract to aid indexing.

·       An Introduction, which should provide a review of recent literature and sufficient background information to allow the results of the article to be understood and evaluated.

·       A Theory or experimental methods used.

·       An Experimental section, which should provide details of the experimental set-up and the methods used for obtaining the results.

·       A Results section, which should clearly and concisely present the data using figures and tables where appropriate.

·       A Discussion section, which should describe the relationships and generalizations shown by the results and discuss the significance of the results making comparisons with previously published work. (It may be appropriate to combine the Results and Discussion sections into a single section to improve the clarity).

·       Conclusions, which should present one or more conclusions that have been drawn from the results and subsequent discussion and do not duplicate the Abstract.

·       References, which must be cited consecutively in the text using square brackets [1] and collected together in a reference list at the end of the manuscript.

 

Units standard SI symbols and abbreviations should be used. Symbols for physical quantities in the text should be written in italics (e.g. v, T, n, etc.). Symbols for units that consist of letters should be inplain text (e.g. ms-1, K, min, mm, etc.).

 

Abbreviations should be spelt out in full on first appearance, e.g., variable time geometry (VTG). Meaning of symbols and units belonging to symbols should be explained in each case or quoted in a special table at the end of the manuscript before References

 

Figures must be cited in a consecutive numerical order in the text and referred to in both the text and the caption as Fig. 1, Fig. 2, etc. Figures should be prepared without borders and on white grounding and should be sent separately in their original formats.

 

Pictures may be saved in resolution good enough for printing in any common format, e.g. BMP, GIF or JPG. However, graphs and line drawings should be prepared as vector images, e.g. CDR, AI. When labeling axes, physical quantities, e.g. t, v, m, etc. should be used whenever possible to minimize the need to label the axes in two languages. Multicurve graphs should have individual curves marked with a symbol. The meaning of the symbol should be explained in the figure caption.

 

Tables should carry separate titles and must be numbered in consecutive numerical order in the text and referred to in both the text and the caption as Table 1, Table 2, etc. In addition to the physical quantity, e.g. t (in italics), units (normal text), should be added in Strojniški vestnik - Journal of Mechanical Engineering 2 square brackets. The tables should each have a heading. Tables should not duplicate data found elsewhere in the manuscript.

 

Acknowledgement of collaboration or preparation assistance may be included before References. Please note the source of funding for the research.

 

REFERENCES

 

A reference list must be included using the following information as a guide. Only cited text references are included. Each reference is referred to in the text by a number enclosed in a square bracket (i.e., [3] or [2] to [6] for more references). No reference to the author is necessary.

 

References must be numbered and ordered according to where they are first mentioned in the paper, not alphabetically. All references must be complete and accurate. All non-English or. non-German titles must be translated into English with the added note (in language) at the end of reference. Examples follow.

 

 

 

Journal Papers:

Surname 1, Initials, Surname 2, Initials (year). Title. Journal, volume, number, pages, DOI code. Journal titles should not be abbreviated. Note that Journal Title is set in italics.

 

[1].    Gungor, A. (2010). Simulation of emission performance and combustion efficiency in biomass fired circulating fluidized bed combustors. Biomass and Bioenergy vol. 34, no. 4 p. 506-514, DOI: 10.1016/j.biombioe.2009.12.016.

 

Books:

Surname 1, Initials, Surname 2, Initials (year). Title. Publisher, place of publication. Note that the Title of the Book is italicized.

 

[2].    Groover, M.P. (2007). Fundamentals of Modern Manufacturing. John Wiley & Sons, Hoboken.

 

Chapters in Books:

Surname 1, Initials, Surname 2, Initials (year). Chapter title. Editor Surname 1, Initials, Editor Surname 2, Initials (ed(s).), Book title. Publisher, place of publication, pages. Note that the Book title is italicized.

 

[3].    Carbone, G., Ceccarelli, M. (2005). Legged robotic systems. Kordić, V., Lazinica, A., Merdan, M. (eds.), Cutting Edge Robotics. Pro literatur Verlag, Mammendorf, p. 553-576.

 

Proceedings Papers:

Surname 1, Initials, Surname 2, Initials (year). Paper title. Proceedings title, pages. Note that the Proceedings Title is italicized.

 

[4].    Li R.T.H., Chung S.H. (2008). Digital boundary controller for single-phase grid-connected CSI. IEEE 2008 Power Electronics Specialists Conference, p. 4562-4568.

 

Standards:

Standard-Code (year). Title. Organisation. Place. Note that the Title of the Standard is italicized.

 

[5].    BS EN 14214:2012+A1:2014. Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods. The British Standards Institution. London.

 

Patents

Standard-Code (year). Title. Organisation. Place. Note that the Title of the Standard is italicized.

 

Surname 1, Initials, Surname 2, Initials (year). Patent No. Place of publication: Publisher. Note that Patent no. is set in italics.

 

[6].    Tsukahara, E., Takurou, K. (2015). U.S. Patent No. 9010288. Shizuoka: U.S. Patent and Trademark Office.

 

www pages:

Surname, Initials or Company name. Title, from http://address, date of access. Note that the www address is italicized.

 

[7].    Mehmet Akif Ersoy University, from http://www.mehmetakif.edu.tr, accessed on 2018-05-01.

 

Reports:

Surname 1, Initials, Surname 2, Initials (year). Title of the Report (Report No: XXX). Place of Publication: Publisher. Note that Title of the Report is set in italics.

 

[8].       Yager, J. (2000). Practice guidelines for the treatment of patients with eating disorders (2nd ed.). Washington, DC: American Psychiatric Association.

 

EXTENDED ABSTRACT (SHORT SCIENTIFIC PAPER)

 

By the time the paper is accepted for publishing, the authors are requested to send the extended abstract (approx. one A4 page or 3.500 to 4.000 characters).

 

COPYRIGHT

 

Along the submission file of the manuscript authors will add a cover letter as a supplementary file. All accepted manuscripts must be accompanied by a Copyright Transfer Agreement, which should be sent to the editor. Authors submitting a manuscript do so on the understanding that the work has not been published before, is not being considered for publication elsewhere and has been read and approved by all authors. The work should be original by the authors and not be published elsewhere in any language without the written consent of the publisher.

 

The proof will be sent to the author showing the final layout of the article. Proof correction must be minimal and fast. Thus it is essential that manuscripts are accurate when submitted.

 

Authors can track the status of their articles on web site on DergiPark of the Techno-Science

 

ARTICLE PROCESSING CHARGE (APC)

 

The journal doesn’t have Article Processing Charge (APC) or any submission charges.

 

DIGITAL DATA REQUIREMENT

 

Main article submission file should be in editable data format, preferably .doc/.docx. The size of the document should not exceed 10 MB, if it does, the upload process will NOT be successful. Large size of the document is usually due to the size of figures, so we suggest you save them under smaller resolution in article file and upload original figures as supplementary file.

 

Due to a large number of papers that are submitted, we only consider reviewing submissions that are in accordance with the guidelines above.

 

 

Ethics committee approval is required for clinical and experimental studies on human and animals, as well as studies in all scientific fields, for which the decision of the ethics committee should be taken.

Ethics committee approval should be stated in the relevant article and documented.
Also, in studies requiring ethics committee approval; Ethics committee approval information regarding institution, date and decision / issue number should be stated by the author / s in their articles.
This information should be on the first or last page of the article.
Nevertheless, the study is based on international declaration, guideline etc. It must be declared appropriate.
In addition, in case reports, the "Informed Consent Form" should be stated by the authors in the article.


Publishing , downloading and reading of articles is free of charge and also no article processing and publishing charges.