Araştırma Makalesi

Kinetic Modeling of Heat and Mass Transfer During Deep Fat Frying of Churro

Cilt: 6 Sayı: 1 31 Mart 2022
PDF İndir
EN

Kinetic Modeling of Heat and Mass Transfer During Deep Fat Frying of Churro

Öz

The effect of deep fat frying temperatures, ranging from 160 to 190 oC, on frying parameters including the heat transfer coefficient (he), mass transfer coefficient (ke) and effective moisture diffusivity (De) were investigated during deep fat frying of churro that is fried dough pastry. Therefore experimental studies were conducted for both heat and mass transfer phenomena and mathematical model was developed for simultaneous transfer by using Newman technique for churro actual geometry (3-D cylindrical shape). Fourier’s and Fick’s laws were applied for computation of coefficients of heat and mass transfer. The he coefficients were 437.360-93.535 W/m2K in the temperatures range of 160 to 190 oC. However, the value of ke and De increased by an increase in oil temperature during frying. The maximum values were determined as 17.36 x10-5 m/s and 2.48 x10-5 m2/s at 190 oC for ke and De, respectively. Model and experimental data had good agreement and the transfer coefficients followed the first order kinetic model with high R2 and low RMSE values. There was found an Arrhenius equation between the effective moisture diffusivity and deep fat frying temperature, so the value of activation energy was calculated as 63.546 kj/mol.

Anahtar Kelimeler

Kaynakça

  1. AACC. 1999. Approved Methods of Analysis (11th ed). St. Paul, MN, U.S.A.
  2. Adedeji, A. A., Ngadi, M. O., Raghavan, G. S. V. (2009). Kinetics of mass transfer in microwave precooked and deep-fat fried chicken nuggets. Journal of food Engineering. 91(1),146-153. https://doi.org/10.1016/j.jfoodeng.2008.08.018
  3. Asefı, N., Roufegarınejad, L. (2021). Modeling of Mass and Heat Transfer in Deep Fat Frying Process and Evaluation in Potato Food Model. Iranıan Journal of Food Scıence And Technology. 18, 345-360.
  4. Dehghannya, J., Ngadi, M. (2021). Recent advances in microstructure characterization of fried foods: Different frying techniques and process modeling. Trends in Food Science & Technology.116,786-801. https://doi.org/10.1016/j.tifs.2021.03.033
  5. de Oliveira Silva, M., Almeida, F. L. C., da Paixão, R. N., de Souza, W. F. C., de Luna Freire, K. R., de Oliveira, C. P. (2022). Preparation and characterization of churro dough with malt bagasse flour. International Journal of Gastronomy and Food Science. 27, 100427. https://doi.org/10.1016/j.ijgfs.2021.100427
  6. Dourado, C., Pinto, C., Barba, F. J., Lorenzo, J. M., Delgadillo, I., Saraiva, J. A. (2019). Innovative non-thermal technologies affecting potato tuber and fried potato quality. Trends in Food Science & Technology. 88, 274-289. https://doi.org/10.1016/j.tifs.2019.03.015
  7. Erim Kose, Y., Dogan, I. S. (2017). Determination of simultaneous heat and mass transfer parameters of tulumba dessert during deep‐fat frying. Journal of Food Processing and Preservation, 41(4), e13082.
  8. Franklin, M. E. E., Pushpadass, H. A., Ravindra Menon, R., Rao, K. J., Nath, B. S. (2014). Modeling the heat and mass transfer during frying of gulab jamun. Journal of Food Processing and Preservation. 38(4), 1939-1947. https://doi.org/10.1111/jfpp.12168

Ayrıntılar

Birincil Dil

İngilizce

Konular

-

Bölüm

Araştırma Makalesi

Yayımlanma Tarihi

31 Mart 2022

Gönderilme Tarihi

27 Ocak 2022

Kabul Tarihi

14 Mart 2022

Yayımlandığı Sayı

Yıl 2022 Cilt: 6 Sayı: 1

Kaynak Göster

APA
Erim Köse, Y. (2022). Kinetic Modeling of Heat and Mass Transfer During Deep Fat Frying of Churro. Bilge International Journal of Science and Technology Research, 6(1), 46-51. https://doi.org/10.30516/bilgesci.1064191
AMA
1.Erim Köse Y. Kinetic Modeling of Heat and Mass Transfer During Deep Fat Frying of Churro. bilgesci. 2022;6(1):46-51. doi:10.30516/bilgesci.1064191
Chicago
Erim Köse, Yağmur. 2022. “Kinetic Modeling of Heat and Mass Transfer During Deep Fat Frying of Churro”. Bilge International Journal of Science and Technology Research 6 (1): 46-51. https://doi.org/10.30516/bilgesci.1064191.
EndNote
Erim Köse Y (01 Mart 2022) Kinetic Modeling of Heat and Mass Transfer During Deep Fat Frying of Churro. Bilge International Journal of Science and Technology Research 6 1 46–51.
IEEE
[1]Y. Erim Köse, “Kinetic Modeling of Heat and Mass Transfer During Deep Fat Frying of Churro”, bilgesci, c. 6, sy 1, ss. 46–51, Mar. 2022, doi: 10.30516/bilgesci.1064191.
ISNAD
Erim Köse, Yağmur. “Kinetic Modeling of Heat and Mass Transfer During Deep Fat Frying of Churro”. Bilge International Journal of Science and Technology Research 6/1 (01 Mart 2022): 46-51. https://doi.org/10.30516/bilgesci.1064191.
JAMA
1.Erim Köse Y. Kinetic Modeling of Heat and Mass Transfer During Deep Fat Frying of Churro. bilgesci. 2022;6:46–51.
MLA
Erim Köse, Yağmur. “Kinetic Modeling of Heat and Mass Transfer During Deep Fat Frying of Churro”. Bilge International Journal of Science and Technology Research, c. 6, sy 1, Mart 2022, ss. 46-51, doi:10.30516/bilgesci.1064191.
Vancouver
1.Yağmur Erim Köse. Kinetic Modeling of Heat and Mass Transfer During Deep Fat Frying of Churro. bilgesci. 01 Mart 2022;6(1):46-51. doi:10.30516/bilgesci.1064191