Determination Optimum B2O3, KCl and NaOH Molar Ratios in the Synthesis of Potassium Borates

Cilt: 11 Sayı: 3 23 Aralık 2015
  • Seyhun Kıpçak
  • Merve Günal
  • Sibel Ila
  • Meral Yıldırım
  • Mehmet Piskin
  • Emek Derun
PDF İndir
EN

Determination Optimum B2O3, KCl and NaOH Molar Ratios in the Synthesis of Potassium Borates

Öz

Borates are attention getting chemical compounds because of their properties which leads them a wide usage area. Being sub-group of borates, potassium borates show non-linear optical properties and owing to this they can find applications in optical modulation, optical switching, optical logic and memory, signal processing. Potassium borates can be used in welding, insulation, metal refining and lubricating oil production applications, also.

In this study, potassium borates were produced from potassium chloride (KCl), sodium hydroxide (NaOH) and boron oxide (B2O3) when different molar ratios of B2O3 were used to find out the optimum ratio for the synthesis at 80°C and 1 hour of reaction time. The molar ratios of reactants were examined as 1:1:3 (as KCl:NaOH: B2O3), 1:1:4, 1:1:5, 1:1:6 and 1:1:7. The identification of products and the effects of different molar ratios on the final product were determined by X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR) methods. According to experimental results, the Santite (KB5O8·4H2O) mineral with powder diffraction file number (pdf) code of 01-072-1688 was produced for all molar ratios whereas the optimum ratios in which highest XRD score was obtained was 1:1:7. 

Anahtar Kelimeler

Kaynakça

  1. Bruce A. Kennedy, Surface Mining, 2nd ed, Society for Mining, Metallurgy, and Exploration (U.S.), 1990, pp.120-125.
  2. Yilmaz, O., Boron in Turkey: Between myth and reality, Insight Turkey, vol. 9 (4), pp. 37-43.
  3. Santite, 2001-2005 Mineral Data Publishing, version 1.
  4. Yang, G. Li, Zhang, Y., Dehydration of tetrahydrate potassium pentaborate in fluidized bed, Chemical Engineering and Processing, vol. 44, 2005, 1216–1220.
  5. Gürbüz, H., Badem, G., Bulutcu, A.N., Determination of crystal growth kinetics of potassium pentaborate in a fluidized bed crystallizer, Journal of Crystal Growth, vol. 283, 2005, 222–229.
  6. Xue, D., Zhang, S., The Origin of nonlinearities in K[B5O6(OH)4]•2H2O crystal, Physica Status Solidi (b), vol. 200, 1997, 351-358.
  7. Dewey, C. F., Cook,W. R., Hodgson, R. T., Wynne, J. J., Frequency doubling in KBsOs•4H2O and NH4BsOs•4H2O to 217.3 nm, Applied Physics Letters, vol. 26, 1975, 714-716.
  8. Rajasekarc, S.A., Thamizharasana, K., Joseph Arul Pragasamb, Packiam Juliusc, A., J., Sagayaraj, P., Growth and characterization of pure and doped potassium pentaborate (KB5) single crystals, Journal of Crystal Growth, vol. 247, 199–206.

Ayrıntılar

Birincil Dil

İngilizce

Konular

-

Bölüm

-

Yazarlar

Merve Günal Bu kişi benim

Meral Yıldırım Bu kişi benim

Mehmet Piskin Bu kişi benim

Emek Derun Bu kişi benim

Yayımlanma Tarihi

23 Aralık 2015

Gönderilme Tarihi

23 Aralık 2015

Kabul Tarihi

-

Yayımlandığı Sayı

Yıl 2015 Cilt: 11 Sayı: 3

Kaynak Göster

APA
Kıpçak, S., Günal, M., Ila, S., Yıldırım, M., Piskin, M., & Derun, E. (2015). Determination Optimum B2O3, KCl and NaOH Molar Ratios in the Synthesis of Potassium Borates. Celal Bayar University Journal of Science, 11(3). https://doi.org/10.18466/cbujos.80610
AMA
1.Kıpçak S, Günal M, Ila S, Yıldırım M, Piskin M, Derun E. Determination Optimum B2O3, KCl and NaOH Molar Ratios in the Synthesis of Potassium Borates. Celal Bayar University Journal of Science. 2015;11(3). doi:10.18466/cbujos.80610
Chicago
Kıpçak, Seyhun, Merve Günal, Sibel Ila, Meral Yıldırım, Mehmet Piskin, ve Emek Derun. 2015. “Determination Optimum B2O3, KCl and NaOH Molar Ratios in the Synthesis of Potassium Borates”. Celal Bayar University Journal of Science 11 (3). https://doi.org/10.18466/cbujos.80610.
EndNote
Kıpçak S, Günal M, Ila S, Yıldırım M, Piskin M, Derun E (01 Aralık 2015) Determination Optimum B2O3, KCl and NaOH Molar Ratios in the Synthesis of Potassium Borates. Celal Bayar University Journal of Science 11 3
IEEE
[1]S. Kıpçak, M. Günal, S. Ila, M. Yıldırım, M. Piskin, ve E. Derun, “Determination Optimum B2O3, KCl and NaOH Molar Ratios in the Synthesis of Potassium Borates”, Celal Bayar University Journal of Science, c. 11, sy 3, Ara. 2015, doi: 10.18466/cbujos.80610.
ISNAD
Kıpçak, Seyhun - Günal, Merve - Ila, Sibel - Yıldırım, Meral - Piskin, Mehmet - Derun, Emek. “Determination Optimum B2O3, KCl and NaOH Molar Ratios in the Synthesis of Potassium Borates”. Celal Bayar University Journal of Science 11/3 (01 Aralık 2015). https://doi.org/10.18466/cbujos.80610.
JAMA
1.Kıpçak S, Günal M, Ila S, Yıldırım M, Piskin M, Derun E. Determination Optimum B2O3, KCl and NaOH Molar Ratios in the Synthesis of Potassium Borates. Celal Bayar University Journal of Science. 2015;11. doi:10.18466/cbujos.80610.
MLA
Kıpçak, Seyhun, vd. “Determination Optimum B2O3, KCl and NaOH Molar Ratios in the Synthesis of Potassium Borates”. Celal Bayar University Journal of Science, c. 11, sy 3, Aralık 2015, doi:10.18466/cbujos.80610.
Vancouver
1.Seyhun Kıpçak, Merve Günal, Sibel Ila, Meral Yıldırım, Mehmet Piskin, Emek Derun. Determination Optimum B2O3, KCl and NaOH Molar Ratios in the Synthesis of Potassium Borates. Celal Bayar University Journal of Science. 01 Aralık 2015;11(3). doi:10.18466/cbujos.80610

Cited By