Utilization of Boron Waste as an Additive for Cement Production

Yıl 2015, Cilt: 11 Sayı: 3, 0 - , 23.12.2015

Kubra Kunt Fatma Dur Beril Ertınmaz Meral Yıldırım Emek Derun Sabriye Pişkin

https://doi.org/10.18466/cbujos.72356

Cited By: 5

Öz

Turkey has 955,297 thousand tonnes of B₂O₃ reserves which correspond to 72.1% of the world. Colemanite (Ca₂B₆O₁₁·5H₂O), ulexite (NaCaB₅O₉·8H₂O) and borax (tincal) (Na₂B₄O₇·10H₂O) are the most important boron minerals that are used in production of boric acid and different kinds of borates. During these production processes, boron including wastes form and these wastes pollute the environment. To minimize the pollution caused by these wastes, they are evaluated in different kinds of processes such as cement and concrete production. Borogypsum is one of the boron wastes that is used in cement mortar production.

In this study the aim was to compare the calcined and non-calcined borogypsum addition to clinker and also investigate its effects on cement mortar. Moreover, to see how borogypsum addition affected the cement properties, different ratios of borogypsum between 1% and 7% were used. Also setting time and consistency analyses were applied to fresh mortar; compressive strength and splitting tensile strength of 3, 7, and 28 days were investigated according to the Turkish Standard (TS EN 196-1). X-ray diffraction (XRD) analysis was realized for characterization of the chemical structure of 28-days mortars. 3% was the ratio at which the optimum results were obtained for both calcined and non-calcined borogypsum.

Anahtar Kelimeler

cement mortar; borogypsum; calcination; XRD

Kaynakça

• http://www.etimaden.gov.tr/bor-rezervleri-72s.htm
• T. Mutuk and B. Mesci, "Analysis of mechanical properties of cement containing boron waste and rice husk ash using full factorial design", Journal of Cleaner Production, vol. 69, pp. 128-132, 2014.
• İ. Y. Elbeyli, E. M. Derun, J. Gülen, and S. Pişkin, "Thermal analysis of borogypsum and its effects on the physical properties of Portland cement", Cement and Concrete Research, vol.33, pp. 1729-1735, 2003.
• U. K. Sevim, "Colemanite ore waste concrete with low shrinkage and high split tensile strength", Materials and Structures, vol. 44, pp. 187-193, 2011.
• U. K. Sevim and Y. Tümen, "Strength and fresh properties of borogypsum concrete", Construction and Building Materials, vol. 48, pp. 342-347, 2013.
• Y. Abalı, S. U. Bayca, and S. Targan, "Evaluation of blends tincal waste, volcanic tuff, bentonite and fly ash for use as cement admixture", Journal of Hazardous Materials, vol. B131, pp. 126-130, 2006.
• T. Kavas, A. Olgun, and Y. Erdoğan, "Setting and hardening of borogypsum- Portland cement clinker- fly ash blends. Studies on effects of molasses on properties of mortar containing borogypsum", Cement and Concrete Research, vol. 35, pp. 711-718, 2005.
• İ. Y. Elbeyli, "Utilization of industrial borax wastes (BW) for portland cement production", Turkish J. Eng. Env. Sci, vol. 28, pp. 281-287, 2004.
• TS EN 196-1, "Methods of testing cement- Part 1: Determination of strength", TSE, Ankara
• TS EN 12350-5, "Testing fresh concrete- Part 5: Flow table test", TSE, Ankara