Bone cutting performance and mechanical properties of piezo-surgical tips: a nano-indentation study
Öz
Purpose: The aims of this study were to compare the mechanical properties of piezo-surgical tips such as nano-hardness, elastic modulus, surface roughness, and wear level, and to measure their cutting performance.
Materials and Methods: In this study, 31 piezo-surgical tips were used, three for control and 28 for testing. The testing tips were equally divided into four groups with different numbers of osteotomies: the four-, 8-, 16-, and 32-osteotomy groups. The mean osteotomy duration was recorded during osteotomy. Scanning electron microscopy images of the tips in the test groups were obtained before and after osteotomy, and the wear level of the tips was measured.
Results: A statistically significant increase was observed in the nano-hardness of the piezo-surgical tips depending on the number of osteotomy (for 4-use; 22.47±1.67H and for 32-use; 28.49±3.42H). The elasticity value of the testing tips was in the range of 218.55±15.74E to 241.26±10.46E, and all of the values were significantly higher than those in the control group (174.39±13.53E). As the frequency of use increased, a significant increase in surface roughness was observed (from 16.67±1.50 to 56.12±2.60). A positive correlation was found between the frequency of use and the wear level of the tips, and between the surface roughness and wear level of the tips.
Conclusion: With the increase in the number of osteotomies, significant changes in the mechanical and physical properties of the piezo-surgical tips that affected their bone-cutting performance were observed.
Anahtar Kelimeler
Piezosurgery, hardness, elasticity, osteotomy
Proje Numarası
20.U.015
Kaynakça
- Leclercq P, Zenati C, Amr S, Dohan DM. Ultrasonic bone cut part 1: State-of-the-art technologies and common applications. J Oral Maxillofac Surg. 2008;66:177-82.
- Carini F, Saggese V, Porcaro G, Baldoni M. Piezolelectric surgery in dentistry: a review. Minerva Stomatol. 2014;63:7-34.
- Schaller BJ, Gruber R, Merten HA, Kruschat T, Schliephake H, Buchfelder M et al. Piezoelectric bone surgery: a revolutionary technique for minimally invasive surgery in cranial base and spinal surgery? Technical note. Neurosurgery. 2005;57:E410.
- Robiony M, Polini F, Costa F, Zerman N, Politi M. Ultrasonic bone cutting for surgically assisted rapid maxillary expansion (SARME) under local anaesthesia. Int J Oral Maxillofac Surg. 2007;36:267-9.
- Schlee M, Steigmann M, Bratu E, Garg AK. Piezosurgery: basics and possibilities. Implant Dent. 2006;15:334-40.
- Vercellotti T. Technological characteristics and clinical indications of piezoelectric bone surgery. Minerva Stomatol. 2004;53:207-14.
- Vercellotti T, Pollack AS. A new bone surgery device: sinus grafting and periodontal surgery. Compend Contin Educ Dent. 2006;27:319-25.
- Pavlíková G, Foltán R, Horká M, Hanzelka T, Borunská H, Sedý J. Piezosurgery in oral and maxillofacial surgery. Int J Oral Maxillofac Surg. 2011;40:451-7.
- Alamoush RA, Salim NA, Elraggal A, Satterthwaite JD, Silikas N. The effect of water storage on nanoindentation creep of various CAD-CAM composite blocks. BMC Oral Health. 2023;23:543.
- Lemoine P, Acheson J, McKillop S, van den Beucken JJ, Ward J, Boyd A et al. Nanoindentation and nano-scratching of hydroxyapatite coatings for resorbable magnesium alloy bone implant applications. J Mech Behav Biomed Mater. 2022;133:105306.
