Evaluation of the Effect of Dental Technicians’ Ceramic Application Experience on Metal–Ceramic Bonding: A Pilot Study

Yıl 2024, Cilt: 34 Sayı: 1, 35 - 39, 18.01.2024

Nurten Baysal , Barış Filiz Erol

https://doi.org/10.5152/CRDS.2024.23261

Öz

ABSTRACT
Objective: The aim of this study was to evaluate the effect of dental technicians’ experience on the shear bond strength (SBS) of ceramic fused to metal restorations.
Methods: Totally 32 casting cobalt–chromium (Co-Cr) disc-shaped (r = 10 mm diameter, h = 1 mm height) specimens were prepared for 2 experimental groups [group 1: untrained dental technician, group 2: conversant dental technician] (n = 16 per group). Ceramic was applied to the disc speci- mens (h = 4 mm height, r = 6 mm diameter), and their SBS was measured with a universal testing device. Results were statistically analyzed using the Student’s t-test (α = .05).
Results: According to the Student’s t-test, no statistically significant differences were seen between the 2 groups (P = .270).
Conclusion: The experience of the dental technicians did not affect the bond strength of casting Cr-Co alloys.
Keywords: Experience, technician, metal–ceramic bonding

ÖZ
Amaç: Bu çalışmanın amacı teknisyen deneyiminin metal destekli seramik restorasyonların makas- lama bağlanma direncine (shear bond strength-SBS) etkisinin olup olmadığının araştırılmasıdır.
Yöntemler: 32 tane döküm Co-Cr disk (10 mm çapında, 1mm kalınlığında) şeklinde örnek iki ayrı çalışma grubu [Grup 1: Deneyimsiz diş teknisyeni (Untrained dental technician-UDT), Grup 2: Deneyimli diş teknisyeni (Conversant dental technician-CDT)] (n = 16 her bir grup için) hazırlandı. Örneklere seramik uygulaması (4 mm yüksekliğinde, 6 mm çapında) yapıldı ve SBS üniversal bir test cihazı ile ölçüldü. Sonuçlar istatistiksel olarak Student t-test ile analiz edildi (α = .05). Bulgular: Deney grupları arasında istatistiksel olarak anlamlı bir sonuç bulunmamıştır (P =.270).
Sonuç: Diş teknisyeninin deneyimli olup olmamasının döküm Co-Cr alaşımlarının bağlanma direncine etkisi görülmemiştir.
Anahtar kelimeler: Deneyim, teknisyen, metal-seramik bağlanması

Anahtar Kelimeler

perience, technician, metal–ceramic bonding

Kaynakça

• 1. Kaleli N, Ural Ç, Küçükekenci AS. The effect of layer thickness on the porcelain bond strength of laser-sintered metal frameworks. J Pros- thet Dent. 2019;122(1):76-81. [CrossRef]
• 2. Özcan M. Fracture reasons in ceramic-fused-to-metal restorations. J Oral Rehabil. 2003;30(3):265-269. [CrossRef]
• 3. Lüthy H, Filser F, Loeffel O, Schumacher M, Gauckler LJ, Ham- merle CHF. Strength and reliability of four-unit all-ceramic posterior bridges. Dent Mater. 2005;21(10):930-937. [CrossRef]
• 4. Baysal N, Ayyıldız S, Orujalipoor I, Erol BF. Effect of 1.5-T and 3.0-T magnetic resonance imaging on the ceramic adhesion and physical properties of prosthetic substructures. J Prosthet Dent. 2020;124(6):809.e1-809.e7. [CrossRef]
• 5. Anusavice KJ. Standardizing failure, success, and survival decisions in clinical studies of ceramic and metal-ceramic fixed dental pros- theses. Dent Mater. 2012;28(1):102-111. [CrossRef]
• 6. Tripathi A, Bagchi S, Singh J. Effect of firing temperature at the por- celain-metal alloy interface in porcelain-fused-to-metal restora- tions. A SEM/EDS study. J Prosthodont. 2018;27(4):355-360. [CrossRef]
• 7. Hammad IA, Goodkind RJ, Gerberich WW. A shear test for the bond strength of ceramometals. J Prosthet Dent. 1987;58(4):431-437. [CrossRef]
• 8. Carter JM, Al-Mudafar J, Sorensen SE. Adherence of a nickel-chro- mium alloy and porcelain. J Prosthet Dent. 1979;41(2):167-172. [CrossRef]
• 9. Pi̇şki̇n B, Si̇pahi̇ C, Ayyıldız S, Günay Y. Assessment of thicknesses and color properties of opaque porcelain layers applied by different den- tal technicians. Gülhane Tıp Derg. 2014;56:199-205.
• 10. Douglas RD, Brewer JD. Variability of porcelain color reproduction by com- mercial laboratories. J Prosthet Dent. 2003;90(4):339-346. [CrossRef]
• 11. Emir F, Piskin B, Sipahi C. Effect of dental technician disparities on the 3-dimensional accuracy of definitive casts. J Prosthet Dent. 2017;117(3):410-418. [CrossRef]
• 12. Lynch CD, Allen PF. Quality of communication between dental prac- titioners and dental technicians for fixed prosthodontics in Ireland. J Oral Rehabil. 2005;32(12):901-905. [CrossRef]
• 13. Tulga A. Effect of annealing procedure on the bonding of ceramic to cobalt-chromium alloys fabricated by rapid prototyping. J Prosthet Dent. 2018;119(4):643-649. [CrossRef]
• 14. Baysal N, Tuğba Kalyoncuoğlu Ü, Ayyıldız S. Mechanical properties and bond strength of additively manufactured and milled dental zirconia: a pilot study. J Prosthodont. 2022;31(7):629-634. [CrossRef]
• 15. Kaleli N, Saraç D. Comparison of porcelain bond strength of different metal frameworks prepared by using conventional and recently introduced fabrication methods. J Prosthet Dent. 2017;118(1):76-82. [CrossRef]
• 16. Sipahi C, Özcan M. Interfacial shear bond strength between different base metal alloys and five low fusing feldspathic ceramic systems. Dent Mater J. 2012;31(3):333-337. [CrossRef]
• 17. Lombardo GHL, Nishioka RS, Souza ROA, et al. Influence of surface treatment on the shear bond strength of ceramics fused to cobalt– chromium. J Prosthodont. 2010;19(2):103-111. [CrossRef]
• 18. Serra-Prat J, J, Cano-Batalla. J, Cabratosa-Termes J, Figueras-Àlva- rez O. Adhesion of dental porcelain to cast, milled, and laser-sintered cobalt-chromium alloys: shear bond strength and sensitivity to ther- mocycling. J Prosthet Dent. 2014;112(3):600-605.
• 19. Baysal N, Erol BF, Ayyıldız S. Evaluation the effect of trichloroethylene on the metal-ceramic bonding. Life Sci. 2022;1(4):153-160. [CrossRef]
• 20. Trindade F, Anami L, da Costa Lima J, et al. The effect of a bonding agent and thermo-mechanical cycling on the bond strength of a glass-ceramic to gold and cobalt-chromium alloys. Appl Adhes Sci. 2014;2(1):16. [CrossRef]
• 21. Xu K, He F, Geng Y. The influence of different opaque thickness on the bond strength of porcelain-fused-to metal restoration. Shanghai Kou Qiang Yi Xue. 2009;18(6):635-638.