Comparative Evaluation of the Cyclic Fatigue Resistance of Thermally Treated Nickel-Titanium (Ni-Ti) instruments at Varying Temperatures

Yıl 2024, Cilt: 34 Sayı: 2, 89 - 93, 15.04.2024

Afzal Ali Aasima Ishaq Sandeep Metdud

https://doi.org/10.5152/CRDS.2023.22038

Öz

Objective: This study aimed to evaluate the stationary cyclic fatigue resistance (CFR) of three endodontic instrument systems at varying temperatures (20 ± 1°C and 37 ± 1°C)..
Methods: Ninety endodontic instruments from three instrument systems (HyFlex CM, 2Shape and Hero Gold) of constant tip size and taper (25.04) were selected for this study. These systems were broadly, divided into three groups (n=30): Group 1 (Hyflex CM), Group 2 (2Shape) and Group 3 (Hero Gold). Each group was further subdivided into two subgroups based on the temperature variable used. The endodontic instruments were subjected to stationary cyclic fatigue testing at 20 ± 1°C and 37 ± 1°C using a stainless-steel block with an artificial canal. The number of cycles to failure (NCF) were recorded
Results: Data was analysed using two-way ANOVA and Tukey post-hoc tests at a 95% confidence level. The instrument type and temperature variable significantly affect the NCF values. The observed NCF of the tested instruments was higher at 20±10 °C compared to its values at 37±10 °C and was statistically significant. The HyFlex CM group exhibited the highest CFR at 20±10 °C, while at 37±10 °C the Hero Gold instruments exhibited a higher CFR.
Conclusion: It can be inferred that Hero Gold instruments exhibited superior clinical performance when compared with Hyflex CM and 2Shape rotary instruments at body temperature (37±10 °C). The observed reduction in the NCF when increasing the temperature ranges between 30.29% - 71.27%..
Keywords: Cyclic Fatigue Resistance, Hero Gold, Hyflex CM, Nickel-Titanium, Stationary Fatigue, and 2Shape

ÖZ
Amaç: Bu çalışma, üç endodontik alet sisteminin değişen sıcaklıklarda (20 ± 1°C ve 37 ± 1°C) sabit yorulma direncini (CFR) değerlendirmeyi amaçladı
Yöntemler: Bu çalışma için sabit uç boyutu ve konikliğe (25,04) sahip üç alet sisteminden (HyFlex CM, 2Shape ve Hero Gold) doksan endodontik alet seçildi. Bu sistemler genel olarak üç gruba ayrıldı: Grup 1 (Hyflex CM), Grup 2 (2Shape) ve Grup 3 (Hero Gold). Her grup ayrıca kullanılan sıcaklık değişkenine bağlı olarak iki alt gruba bölündü. Endodontik aletler, yapay kanallı paslanmaz çelik bir blok kullanılarak 20 ± 1°C ve 37 ± 1°C'de sabit döngüsel yorulma testine tabi tutuldu. Arızaya kadar olan döngü sayısı (NCF) kaydedildi
Bulgular: Veriler, iki yönlü ANOVA ve Tukey post-hoc testleri kullanılarak %95 güven seviyesinde analiz edildi. Alet tipi ve sıcaklık değişkeni NCF değerlerini önemli ölçüde etkiler. Test edilen cihazların gözlenen NCF'si 20±10 C'de 37±10 C'deki değerlerine göre daha yüksekti ve istatistiksel olarak anlamlıydı. HyFlex CM grubu en yüksek CFR'yi 20±10 C'de sergilerken, 37±10 C'de Hero Gold aletleri daha yüksek bir CFR sergiledi
Sonuç: Hero Gold aletlerinin vücut sıcaklığında (37±10 C) Hyflex CM ve 2Shape döner aletlerle karşılaştırıldığında üstün klinik performans sergilediği söylenebilir. Sıcaklık artırıldığında NCF'de gözlenen azalma %30,29 - %71,27 arasında değişmektedir.
Anahtar Kelimeler: Cyclic Fatigue Resistance, Hero Gold, Hyflex CM, Nickel-Titanium, Stationary Fatigue, and 2Shape

Anahtar Kelimeler

Cyclic Fatigue Resistance, Hero Gold, Hyflex CM, Nickel-Titanium, Stationary Fatigue

Kaynakça

• 1. Thompson S. An overview of nickel–titanium alloys used in dentistry. Int Endod. J 2000;33(4):297-310.
• 2. Andreasen G, Wass K, Chan K. A review of superelastic and thermodynamic nitinol wire. Quintessence Int. 1985;16(9):623-626.
• 3. Klymus ME, Alcalde MP, Vivan RR, Só MVR, de Vasconselos BC, Duarte MAH. Effect of temperature on the cyclic fatigue resistance of thermally treated reciprocating instruments. Clin Oral Investig. 2019;23(7):3047-3052.
• 4. Jamleh A, Alghaihab A, Alfadley A, Alfawaz H, Alqedairi A, Alfouzan K. Cyclic fatigue and torsional failure of EdgeTaper Platinum endodontic files at simulated body temperature. J Endod. 2019;45(5):611-614.
• 5. Inan U, Keskin C, Yilmaz ÖS, Baş G. Cyclic fatigue of Reciproc Blue and Reciproc instruments exposed to intracanal temperature in simulated severe apical curvature. Clin Oral Investig. 2019;23(5):2077-2082.
• 6. Ali A, Gözen NU, Kul AK, Chhabra N. Stationary Fatigue Resistance of Various Rotary Instruments with Different Alloys after Preparing Three Root Canals. Eur Endod J. 2021;6(3):278-283.
• 7. Pruett JP, Clement DJ, Carnes Jr DL. Cyclic fatigue testing of nickel-titanium endodontic instruments. J Endod. 1997;23(2):77-85.
• 8. Caicedo R, Clark S. HyFlex CM rotary files: an excellent innovation for endodontic treatment. Endod Pract. 2012;4:10-17.
• 9. Elnaghy AM, Elsaka SE, Elshazli AH. Dynamic cyclic and torsional fatigue resistance of TruNatomy compared with different nickel–titanium rotary instruments. Aust Endod J. 2020;46(2):226-233.
• 10. Bedier MM, Gawdat SI. Effect of different temperatures on flexural cyclic fatigue resistance of 2shape and OneShape rotary endodontic instruments. Egypt Dent J. 2020;66:355-364.
• 11. https://www.amazon.in/dp/B09HJHFMWZ/ref=cm_sw_r_ apan_glt_i_ 6MCCZJXCP17QF2A4CKQ4.
• 12. Kaval ME, Capar ID, Ertas H. Evaluation of the cyclic fatigue and torsional resistance of novel nickel-titanium rotary files with various alloy properties. J Endod. 2016;42(12):1840-1843.
• 13. Gündoğar M, Özyürek T. Cyclic fatigue resistance of OneShape, HyFlex EDM, WaveOne Gold, and Reciproc Blue nickel-titanium instruments. J Endod. 2017;43(7):1192-1196.
• 14. De Vasconcelos RA, Murphy S, Carvalho CAT, Govindjee RG, Govindjee S, Peters OA. Evidence for reduced fatigue resistance of contemporary rotary instruments exposed to body temperature. J Endod. 2016;42(5):782-787.
• 15. Jamleh A, Yahata Y, Ebihara A, Atmeh AR, Bakhsh T, Suda H. Performance of NiTi endodontic instrument under different temperatures. Odontology. 2016;104(3):324-328.