EN
TR
STATIC AND DINAMIC ANALYSIS OF ELASTIC BEAMS BY BACK-PROPAGATION ARTIFICIAL NEURAL NETWORK
Öz
A multi-layer artificial neural network is developed to give maximum deflection and
vibration frequencies for various support conditions of elastic beams. Back-propagation
training algorithms are used in the study and four support conditions are taken into
considerations. For the maximum deflection value, artificial neural network is trained both
end clamped, clamped-simply supported and both end simply supported conditions.
Cantilever beam boundary conditions, however, are taken in to considerations on the test
stage. On the other hand, the network is tested for both end simply supported and it's trained
other three support condition. Support condition in the static and dynamic analysis are
different both training and test stage. The required datum for training set are obtained from
results of analytical equation for the vibration and deflection analysis of the beams and
Rayleigh solutions. The obtained results are compared with the Rayleigh method and other
numerical solutions technique.
Anahtar Kelimeler
Ayrıntılar
Birincil Dil
Türkçe
Konular
-
Bölüm
-
Yayımlanma Tarihi
1 Ocak 2004
Gönderilme Tarihi
1 Ocak 2004
Kabul Tarihi
-
Yayımlandığı Sayı
Yıl 2004 Cilt: 6 Sayı: 1
APA
Civalek, Ö., & Çatal, H. H. (2004). GERİYE YAYILMA YAPAY SİNİR AĞI KULLANILARAK ELASTİK KİRİŞLERİN STATİK VE DİNAMİK ANALİZİ. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, 6(1), 1-16. https://izlik.org/JA72GL35FT
AMA
1.Civalek Ö, Çatal HH. GERİYE YAYILMA YAPAY SİNİR AĞI KULLANILARAK ELASTİK KİRİŞLERİN STATİK VE DİNAMİK ANALİZİ. DEUFMD. 2004;6(1):1-16. https://izlik.org/JA72GL35FT
Chicago
Civalek, Ömer, ve H. Hikmet Çatal. 2004. “GERİYE YAYILMA YAPAY SİNİR AĞI KULLANILARAK ELASTİK KİRİŞLERİN STATİK VE DİNAMİK ANALİZİ”. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi 6 (1): 1-16. https://izlik.org/JA72GL35FT.
EndNote
Civalek Ö, Çatal HH (01 Ocak 2004) GERİYE YAYILMA YAPAY SİNİR AĞI KULLANILARAK ELASTİK KİRİŞLERİN STATİK VE DİNAMİK ANALİZİ. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi 6 1 1–16.
IEEE
[1]Ö. Civalek ve H. H. Çatal, “GERİYE YAYILMA YAPAY SİNİR AĞI KULLANILARAK ELASTİK KİRİŞLERİN STATİK VE DİNAMİK ANALİZİ”, DEUFMD, c. 6, sy 1, ss. 1–16, Oca. 2004, [çevrimiçi]. Erişim adresi: https://izlik.org/JA72GL35FT
ISNAD
Civalek, Ömer - Çatal, H. Hikmet. “GERİYE YAYILMA YAPAY SİNİR AĞI KULLANILARAK ELASTİK KİRİŞLERİN STATİK VE DİNAMİK ANALİZİ”. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi 6/1 (01 Ocak 2004): 1-16. https://izlik.org/JA72GL35FT.
JAMA
1.Civalek Ö, Çatal HH. GERİYE YAYILMA YAPAY SİNİR AĞI KULLANILARAK ELASTİK KİRİŞLERİN STATİK VE DİNAMİK ANALİZİ. DEUFMD. 2004;6:1–16.
MLA
Civalek, Ömer, ve H. Hikmet Çatal. “GERİYE YAYILMA YAPAY SİNİR AĞI KULLANILARAK ELASTİK KİRİŞLERİN STATİK VE DİNAMİK ANALİZİ”. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, c. 6, sy 1, Ocak 2004, ss. 1-16, https://izlik.org/JA72GL35FT.
Vancouver
1.Ömer Civalek, H. Hikmet Çatal. GERİYE YAYILMA YAPAY SİNİR AĞI KULLANILARAK ELASTİK KİRİŞLERİN STATİK VE DİNAMİK ANALİZİ. DEUFMD [Internet]. 01 Ocak 2004;6(1):1-16. Erişim adresi: https://izlik.org/JA72GL35FT