The Effect of Different Solutions on the Color Stability of Temporary Restorations

Yıl 2025, Cilt: 11 Sayı: 2, 71 - 76, 29.08.2025

Şükriye Ece Doğan

https://doi.org/10.21306/dishekimligi.1708952

Öz

Objective: The aim of this study was to evaluate the color stability of three different temporary restorative materials (Polymethyl methacrylate [PMMA], bis-acryl composite resin, and photopolymerized resin produced by three-dimensional [3D] printing) after immersion in tea, coffee, and distilled water.
Materials and Methods: A total of 45 specimens were prepared using PMMA, bis-acryl composite resin, and 3D-printed photopolymerized temporary resin. Fifteen specimens from each material group were immersed in three different solutions (coffee, tea, distilled water) for 14 days. Initial and final L*, a*, and b* color values were measured using a spectrophotometer, and color change was calculated using the ΔE formula. Normality of the data was assessed with the Shapiro-Wilk test, and two-way analysis of variance was applied. Within-group differences were evaluated using the Friedman test, and between-group differences using the Kruskal-Wallis test. A significance level of p<0.05 was adopted for all statistical analyses.
Results: Material type, solution type, and their interaction had a statistically significant effect on color change values (p<0.001). The greatest color change was observed in the 3D-printed resin immersed in coffee, while the lowest was found in the same material immersed in distilled water.
Conclusion: The color stability of temporary restorative materials varies depending on both the chemical composition of the material and the solution it is exposed to. Particularly in esthetic zone restorations, the tendency of 3D-printed resins to exhibit greater discoloration should be considered when selecting a suitable material.

Anahtar Kelimeler

temporary restorations , color stability , pmma , bis-acryl , 3d printing

Farklı solüsyonların geçici restorasyonların renk stabilitesine etkisi

Öz

Amaç: Bu çalışmanın amacı, üç farklı geçici restoratif materyalin (Polimetilmetakrilat [PMMA], bis-akril kompozit rezin ve 3Boyutlu [3B] yazıcı ile üretilmiş fotopolimerize rezin) çay, kahve ve distile suya maruz bırakılmaları sonrası renk stabilitesini değerlendirmektir.
Gereç ve Yöntemler: Çalışmada PMMA, bis-akril kompozit rezin ve 3B yazıcı ile üretilmiş fotopolimerize geçici rezinden toplam 45 örnek hazırlanmıştır. Her materyal grubundan 15 örnek üretilmiş ve bu örnekler üç farklı solüsyonda (kahve, çay, distile su) 14 gün süreyle bekletilmiştir. Başlangıç ve final L*, a*, b* renk değerleri spektrofotometre ile ölçülmüş, ΔE formülü ile renk değişimi hesaplanmıştır. Elde edilen verilerin normal dağılıma uygunluğu Shapiro-Wilk testi ile bakılmış, iki yönlü varyans analizi uygulanmıştır. Grup içi farklar Friedman, grup arası farklar Kruskal-Wallis testi ile değerlendirilmiştir. Anlamlılık düzeyi p<0.05 olarak kabul edilmiştir.
Bulgular: Materyal tipi, solüsyon türü ve bu iki değişkenin etkileşimi renk değişim değerleri üzerinde anlamlı farklılık oluşturmuştur (p<0.001). En fazla renk değişimi kahvede bekletilen 3B baskı rezin materyalinde gözlenmiş, en düşük renk değişimi ise distile suda bekletilen 3B rezin grubunda tespit edilmiştir.
Sonuç: Geçici restoratif materyallerin renk stabilitesi, hem materyalin kimyasal yapısına hem de maruz kaldığı solüsyona bağlı olarak değişmektedir. Özellikle estetik bölgedeki geçici restorasyonlarda, 3B rezinlerin yüksek renklenme eğilimi göz önünde bulundurularak materyal seçimi yapılmalıdır.

Anahtar Kelimeler

Geçici restorasyon , renk stabilitesi , pmma , bis akril , 3b yazıcı

Etik Beyan

çalışmanın etik kurul onayı ihtiyacı yoktur.

Kaynakça

• 1. Gratton DG, Aquilino SA. Interim restorations. Dent Clin North Am. 2004;48:487–497.
• 2. Lodding DW. Long-term esthetic provisional restorations in dentistry. Curr Opin Cosmet Dent. 1997;4:16–21.
• 3. Singla M, Padmaja K, Arora J, Shah A. Provisional restorations in fixed prosthodontics. Int Dent Res. 2014;1:148–151.
• 4. Song SY, Shin YH, Lee JY, Shin SW. Color stability of provisional restorative materials with different fabrication methods. J Adv Prosthodont. 2020;12:259–264.
• 5. Lewinstein I, Fuhrer N, Gelfand K, Cardash H, Pilo R. Retention, marginal leakage, and cement solubility of provisional crowns cemented with temporary cement containing stannous fluoride. Int J Prosthodont. 2003;16:189–194.
• 6. Lee J, Lee S. Evaluation of add-on methods for bis-acryl composite resin interim restorations. J Prosthet Dent. 2015;114:594–601.
• 7. Özyemişci Cebeci N, Hancı Tokmakcıoğlu H. Protetik diş tedavisinde ekleme yöntemi ile üretim. Health Acad Kastamonu. 2018;3:66–86.
• 8. Rayyan MM, Aboushelib M, Sayed NM, Ibrahim A, Jimbo R. Comparison of interim restorations fabricated by CAD/CAM with those fabricated manually. J Prosthet Dent. 2015;114:414–419.
• 9. Paravina RD, Ghinea R, Herrera LJ, et al. Color difference thresholds in dentistry. J Esthet Restor Dent. 2015;27 Suppl 1:S1–9.
• 10. Subaşı MG, Demir N, Karcı M, Bozkurt MG. Farklı geçici materyallerin farklı sıvılarda kısa dönem bekletme sonrası renk ve yüzey pürüzlülük değişiminin incelenmesi. Atatürk Univ Diş Hek Fak Derg. 2019;29: 448–454.
• 11. Song SY, Shin YH, Lee JY, Shin SW. Color stability of provisional restorative materials with different fabrication methods. J Adv Prosthodont. 2020;12:259– 264.
• 12. Bankoğlu Güngör M, Karakoca Nemli S, Turhan Bal B, Doğan A. Farklı içeceklerde bekletilen geçici restorasyon materyallerinin renk stabilitelerinin karşılaştırılması. Acta Odontol Turc. 2016;33:80–85.
• 13. Rutkunas V, Sabaliauskas V, Mizutani H. Effects of different food colorants and polishing techniques on color stability of provisional prosthetic materials. Dent Mater J. 2010;29:167–176.
• 14. Sağlam G. Effect of povidone iodine at different concentrations on the color stability of hybrid CAD/CAM material. Curr Res Dent Sci. 2022;32:75–79.
• 15. Guler AU, Yilmaz F, Kulunk T, Guler E, Kurt S. Effects of different drinks on stainability of resin composite provisional restorative materials. J Prosthet Dent. 2005; 94:118–124.
• 16. Alshamrani SA, Alobaid BF, Alharkan HM. Comparative analysis of color stability among 3Dprinted resin-based, CAD/CAM, and conventional interim fixed prosthodontic materials. J Pharm Bioallied Sci. 2024;16 Suppl 5:S4618–S4622.
• 17. Turgut S, Bagis B, Ayaz EA, Ulusoy KU, Altintas SH, Korkmaz FM, et al. Discoloration of provisional restorations after oral rinses. Int J Med Sci. 2013;10: 1503–1509.
• 18. Fatima T, Abubakar P, Deshpande S, Afreen N, Sheshnag G, Safoora S, et al. Evaluation of the effect of various beverages and food materials on the color stability of provisional materials: an in vitro study. Cureus. 2024;16:e7423.
• 19. Haselton DR, Arnold DM, Dawson DV. Color stability of provisional crown and fixed partial denture resins. J Prosthet Dent. 2005;93:70–75.
• 20. Sham AS, Chu FC, Chai J, Chow TW. Color stability of provisional prosthodontic materials. J Prosthet Dent. 2004;91:447–452.
• 21. Galbraith A, Doan M, Galbraith T, Abubakr NH. Evaluation of color stability and marginal integrity in provisional restorations: a study of milling, 3D printing, and conventional fabrication methods. Dent J. 2025;13:189.
• 22. Hashemzade Z, Alihemmati M, Hakimaneh SMR, Shayegh SS, Bafandeh MA, Mohammadi Z. Comparison of color stability and surface roughness of interim crowns fabricated by conventional, milling and 3D printing methods. Clin Exp Dent Res. 2025;11:e70119.
• 23. Zohdy A, Beleidy M, Kotob S, Elnaggar G. Surface roughness and color stability of milled versus 3D-printed interim restoration after immersion in two pH media: in vitro study. Egypt Dent J. 2024;70:2591–2604.
• 24. Almejrad L, Yang CC, Morton D, Lin WS. The effects of beverages and surface treatments on the color stability of 3D-printed interim restorations. J Prosthodont. 2022;31:165–170.