EN
TR
Design and implementation of multiband microstrip antenna for energy harvesting
Abstract
Antennas are of great importance in energy harvesting systems. It is possible to collect more energy with RF energy harvesting systems by using multiband antennas. In this study, a microstrip antenna was designed and fabricated for operation at 307 MHz, 1721 MHz, and 5447 MHz frequency bands. The designed multiband antenna with size of 82.05x104.76x1.60 mm3 was optimized for collecting more energy and then, implemented on FR4 substrate. Return loss, voltage standing wave ratio, imaginary and real impedances of the manufactured multiband microstrip antenna were measured by vector network analyzer. The multiband antenna gain was calculated as 2.02 dBi. Furthermore, a good agreement was noted between the measurement and simulation results of the multiband microstrip antenna. As a result, it is determined that the produced multiband microstrip antenna is a useful and suitable antenna for RF energy harvesting circuits.
Keywords
Destekleyen Kurum
Dicle Üniversitesi BAP Koordinatörlüğü
Proje Numarası
Mühendislik.23.013
Teşekkür
This study was supported by Dicle University Scientific Research Projects Coordination Office. Project Number: Mühendislik.23.013
Kaynakça
- [1] B. S. Kranth, G. K. Dilip, and K. Bhagath Kumar, “Planar Patch Antenna for 2.4 GHz Wireless Applications,” Ver. II, IOSR Journal of Electronics and Communication Engineering (IOSR-JECE) e-ISSN: 2278-2834, p- ISSN: 2278-8735.Volume 9, Issue 3, Ver. II (May - Jun. 2014), PP 61-64 www.iosrjournals.org. doi:10.9790/2834-09326164.
- [2] J. A. Ansari, P. Singh, S. K. Dubey, R. U. Khan, and B. R. Vishvakarma, “H-shaped stacked patch antenna for dual band operation,” Progress In Electromagnetics Research B, vol. 5, pp. 291–302, 2008, doi: 10.2528/pierb08031203.
- [3] E. Levine, G. Malamud, and D. Treves, “A study of microstrip array antennas with the feed network,” IEEE Transactions on Antennas and Propagation, 37:4 (1989).
- [4] A. Elhamraoui, E. Abdelmounim, J. Zbitou, H. Bennis, and M. Latrach, “A new design of a microstrip antenna with modified ground for RFID applications,” International Journal of Intelligent Engineering and Systems, vol. 11, no. 6, pp. 44–51, 2018, doi: 10.22266/IJIES2018.1231.05.
- [5] H. F. Abutarboush and A. Shamim, “Paper-based inkjet-printed tri-band U-slot monopole antenna for wireless applications,” IEEE Antennas Wirel Propag Lett, vol. 11, pp. 1234–1237, 2012, doi: 10.1109/LAWP.2012.2223751.
- [6] X. L. Sun, L. Liu, S. W. Cheung, and T. I. Yuk, “Dual-band antenna with compact radiator for 2.4/5.2/5.8 GHz WLAN applications,” IEEE Trans Antennas Propag, vol. 60, no. 12, pp. 5924–5931, 2012, doi: 10.1109/TAP.2012.2211322.
- [7] G. Kumar and K. C. Gupta, “Trapezoidal shaped microstrip antennas for wider bandwidth and beamwidth,” Int. Conf. Commun. Circuits and Syst., Calcutta (India), p. 7, Dec. 1981.
- [8] D. H. Schaubert and F. G. Farrar, “Some conformal printed circuit antenna designs,” in Proc. Workshop Printed Circuit Antennas, New Mexico State Univ., vol. 1-, pp. 5.1-5.21, Oct. 1979.
Ayrıntılar
Birincil Dil
İngilizce
Konular
Mühendislik Elektromanyetiği
Bölüm
Araştırma Makalesi
Erken Görünüm Tarihi
30 Eylül 2024
Yayımlanma Tarihi
30 Eylül 2024
Gönderilme Tarihi
21 Şubat 2024
Kabul Tarihi
4 Temmuz 2024
Yayımlandığı Sayı
Yıl 2024 Cilt: 15 Sayı: 3