Endüstriyel Otonom Mobil Robotların Hassas Hizalanması İçin Çok Aşamalı 2B LiDAR Tabanlı Reaktif Yanaşma Çerçevesi

Öz

Otonom mobil robotların (AMR’lerin) şarj üniteleri, yükleme istasyonları ve park alanları gibi farklı endüstriyel hedeflere güvenilir biçimde yanaşması, dar mekanik toleranslar, sensör gürültüsü, yansıtıcı yüzeyler ve son yaklaşım sırasında yönelim hatalarının etkisinin büyümesi nedeniyle hâlâ önemli bir problemdir. Bu çalışmada, pasif U-şekilli mekanik kılavuz yapı ile desteklenen, 2B LiDAR tabanlı çok aşamalı reaktif bir yanaşma çerçevesi sunulmaktadır. Önerilen yaklaşım, sabit açılı lazer ışını örnekleme, dinamik indeks kompanzasyonu, mesafe temelli durum geçişleri ve bir kurtarma stratejisini bir araya getirerek, görsel işaretleyicilere veya yoğun nokta bulutu eşleştirmeye ihtiyaç duymadan tekrarlanabilir son hizalama sağlamaktadır. Uygulanan sistemde, yanaşma algısı ve yakın alan güvenlik izlemesi için öne yerleştirilmiş, güvenlik sertifikalı tek bir 2B LiDAR sensörü kullanılmıştır. Yanaşma süreci, hem normal çalışma koşullarını hem de kurtarma performansını değerlendirebilmek amacıyla nominal ve bozulmuş başlangıç pozu koşulları altında incelenmiştir. Üç farklı istasyon tipinde gerçekleştirilen toplam 240 yanaşma denemesinden elde edilen sonuçlar, yüksek görev başarısı, santimetre düzeyinde son hizalama doğruluğu ve düşük hesaplama yükü ortaya koymuştur. Bu bulgular, önerilen donanım-yazılım ortak tasarımlı çerçevenin, endüstriyel AMR uygulamalarında hassas yanaşma için pratik ve hesaplama açısından verimli bir çözüm sunduğunu göstermektedir.

Anahtar Kelimeler

• : Otonom mobil robot
• 2B LiDAR
• lazerle yanaşma (laser docking)
• çok aşamalı kontrol
• reaktif hizalama
• mesafe eşiği kontrolü
• endüstriyel robotik.

A Multi-Stage 2D LiDAR-Based Reactive Docking Framework for Precision Alignment of Industrial Autonomous Mobile Robots

Öz

Reliable docking of autonomous mobile robots (AMRs) to heterogeneous industrial stations, including charging units, loading bays, and parking areas, remains a challenging problem because of tight mechanical tolerances, sensor noise, reflective surfaces, and the increasing effect of orientation errors during the final approach. This study presents a multi-stage reactive docking framework based on 2D LiDAR and supported by a passive U-shaped mechanical guide structure. The proposed approach combines fixed-angle laser ray sampling, dynamic index compensation, distance-based state transitions, and a recovery strategy to achieve repeatable terminal alignment without relying on visual fiducial markers or dense point-cloud registration. In the implemented system, a single front-mounted safety-rated 2D LiDAR sensor is used for docking perception and near-field safety monitoring. The docking process is evaluated under both nominal and degraded initial-pose conditions in order to assess normal operation as well as recovery performance. Experimental results obtained from 240 docking trials conducted across three station types show high task success, centimeter-level terminal alignment accuracy, and low computational burden. These findings suggest that the proposed hardware–software co-designed framework offers a practical and computationally efficient solution for precision docking in industrial AMR applications.

Anahtar Kelimeler

• Autonomous mobile robot
• 2D LiDAR
• laser docking
• multi-stage control
• reactive alignment
• distance-threshold control
• industrial robotics.

Kaynakça

1. [1] G. Fragapane, D. Ivanov, M. Peron, F. Sgarbossa, and J. O. Strandhagen, “Increasing flexibility and productivity in Industry 4.0 production networks with autonomous mobile robots and smart intralogistics,” Ann. Oper. Res., vol. 308, no. 1–2, pp. 125–143, 2022, DOI: 10.1007/s10479-020-03526-7.
2. [2] N. A. K. Zghair and A. S. Al-Araji, “A one decade survey of autonomous mobile robot systems,” Int. J. Electr. Comput. Eng., vol. 11, no. 6, pp. 4891–4906, Dec. 2021, DOI: 10.11591/ijece.v11i6.pp4891-4906.
3. [3] MarketsandMarkets, “Autonomous Mobile Robots Market—Global Forecast to 2030,” MarketsandMarkets Research Pvt. Ltd., Research Report, 2024. [Online]. Available: https://www.marketsandmarkets.com. Accessed on: Apr. 2025.
4. [4] P. J. Besl and N. D. McKay, “A method for registration of 3-D shapes,” IEEE Trans. Pattern Anal. Mach. Intell., vol. 14, no. 2, pp. 239–256, Feb. 1992, DOI: 10.1109/34.121791.
5. [5] H. Li, J. Huang, Z. Yang, Z. Hu, D. Yang, and Z. Zhong, “Adaptive robust path tracking control for autonomous vehicles with measurement noise,” Int. J. Robust Nonlinear Control, vol. 32, no. 13, pp. 7319–7335, 2022, DOI: 10.1002/rnc.6218.
6. [6] Industrial trucks — Safety requirements and verification — Part 4: Driverless industrial trucks and their systems, ISO 3691-4:2020, International Organization for Standardization, Geneva, Switzerland, 2020.
7. [7] J. Semjon, J. Grexa, and P. Mako, “Design of docking system for mobile robotics platform type AGV,” Technical Sciences and Technologies, no. 4(14), pp. 210–215, 2018, DOI: 10.25140/2411-5363-2018-4(14)-210-215.
8. [8] G. Zhan, Z. Chen, Z. Zhang, et al., “Pose detection and docking control for autonomous dynamic docking mechanism with non-cooperative targets,” Industrial Robot, vol. 51, no. 5, pp. 715–728, 2024, DOI: 10.1108/IR-11-2023-0287.

9. [9] L. Hu, W. Lu, X. Li, and H. Lin, “High accuracy localization and docking for mobile robots in low dynamic environments,” in Proc. IEEE Int. Conf. Neural Networks, Information and Communication Engineering (NNICE), Guangzhou, China, 2024, pp. 1579–1587, DOI: 10.1109/NNICE61279.2024.10499109.
10. [10] B. Poskart, G. Iskierka, K. Krot, and P. Krowicki, “Adaptive positioning of a mobile robot for precise workstation operation,” in Intelligent Systems in Production Engineering and Maintenance IV (ISPEM 2025), A. Burduk et al., Eds., Lecture Notes in Mechanical Engineering. Cham, Switzerland: Springer, 2026, pp. 356–370, doi: 10.1007/978-3-032-01517-4_26.
11. [11] H. Suk and M. Won, “Docking control algorithm for autonomous mobile robot through sensor fusion,” J. Inst. Control Robot. Syst., vol. 29, no. 9, pp. 717–725, 2023, DOI: 10.5302/j.icros.2023.23.0083.
12. [12] Y. Zhao, X. Li, W. Lu, and L. Hu, “A method for autonomous shelf recognition and docking of mobile robots based on 2D LiDAR,” in Artificial Intelligence Technologies and Applications, C. Chen, Ed., Frontiers in Artificial Intelligence and Applications, vol. 382. Amsterdam, The Netherlands: IOS Press, 2024, pp. 104–112, doi: 10.3233/FAIA231288. [13] S. Ç. Tekkök, B. Bostancı, M. E. Söyünmez, and P. Oğuz Ekim, “A novel docking algorithm based on the LiDAR and the V-shape features,” European Journal of Science and Technology, no. 26, pp. 35–40, 2021, doi: 10.31590/ejosat.947521.
13. [14] A. Yılmaz and H. Temeltaş, “A multi-stage localization framework for accurate and precise docking of autonomous mobile robots (AMRs),” Robotica, vol. 42, no. 6, pp. 1885–1908, 2024, DOI: 10.1017/S0263574724000602.
14. [15] X. Zhang, X. Li, and X. Zhang, “Automatic docking and charging of mobile robot based on laser measurement,” in Proc. IEEE Int. Conf. Advanced Information Technology, Electronic and Automation Control (IAEAC), Chongqing, China, 2021, pp. 2229–2234, DOI: 10.1109/IAEAC50856.2021.9390995.
15. [16] S. Açıkel and A. Gökçen, “Localization and point cloud based 3D mapping with autonomous robots,” European Journal of Science and Technology, Special Issue, pp. 82–92, 2019, doi: 10.31590/ejosat.636389.
16. [17] A. Censi, “An ICP variant using a point-to-line metric,” in Proc. IEEE Int. Conf. Robotics and Automation (ICRA), Pasadena, CA, USA, 2008, pp. 19–25, doi: 10.1109/ROBOT.2008.4543181.
17. [18] A. Segal, D. Haehnel, and S. Thrun, “Generalized-ICP,” in Proc. Robotics: Science and Systems (RSS), Seattle, WA, USA, 2009, DOI: 10.15607/RSS.2009.V.021.
18. [19] E. B. Olson, “Real-time correlative scan matching,” in Proc. IEEE Int. Conf. Robotics and Automation (ICRA), Kobe, Japan, 2009, pp. 4387–4393, doi: 10.1109/ROBOT.2009.5152375.
19. [20] S. Macenski, F. Martín, R. White, and J. Ginés Clavero, “The Marathon 2: A navigation system,” in Proc. IEEE/RSJ Int. Conf. Intelligent Robots and Systems (IROS), Las Vegas, NV, USA, 2020, pp. 2718–2725, doi: 10.1109/IROS45743.2020.9341207.
20. [21] S. Rusinkiewicz and M. Levoy, “Efficient variants of the ICP algorithm,” in Proc. 3rd Int. Conf. 3-D Digital Imaging and Modeling (3DIM), Quebec City, QC, Canada, 2001, pp. 145–152, DOI: 10.1109/IM.2001.924423.
21. [22] G. Grisetti, C. Stachniss, and W. Burgard, “Improved techniques for grid mapping with Rao-Blackwellized particle filters,” IEEE Trans. Robot., vol. 23, no. 1, pp. 34–46, Feb. 2007, DOI: 10.1109/TRO.2006.889486.
22. [23] H. Jeong and H. Lee, “CNN-based fault detection of scan matching for accurate SLAM in dynamic environments,” Sensors, vol. 23, no. 6, Art. no. 2940, 2023, DOI: 10.3390/s23062940.
23. [24] J. H. Moon and J. Moon, “Precise target point localization in 2D SLAM using multi maps,” IEEE Access, vol. 14, pp. 15379–15393, 2026, DOI: 10.1109/ACCESS.2026.3658449.
24. [25] D. Amarasinghe, G. K. I. Mann, and R. G. Gosine, “Vision-based hybrid control strategy for autonomous docking of a mobile robot,” in Proc. IEEE Conf. Control Applications (CCA), Toronto, ON, Canada, 2005, pp. 1600–1605, DOI: 10.1109/CCA.2005.1507361.
25. [26] Y. Liu, “A laser intensity based autonomous docking approach for mobile robot recharging in unstructured environments,” IEEE Access, vol. 10, pp. 71165–71176, 2022, DOI: 10.1109/ACCESS.2022.3188099.
26. [27] A. Yilmaz, A. D. Vit, I. H. Savci, H. Ocakli, and H. Temeltas, “Reference cage architecture for autonomous docking of mobile robots in automotive production systems,” Int. J. Adv. Manuf. Technol., vol. 129, no. 7–8, pp. 3497–3511, 2023, doi: 10.1007/s00170-023-12456-0.
27. [28] F. Jia, M. Afaq, B. Ripka, Q. Huda, and R. Ahmad, “Vision- and Lidar-based autonomous docking and recharging of a mobile robot for machine tending in autonomous manufacturing environments,” Appl. Sci., vol. 13, no. 19, Art. no. 10675, 2023, DOI: 10.3390/app131910675.
28. [29] Y. Zhu, Q. Meng, H. Yu, H. Wang, J. Hu, P. Li, and B. Hu, “Wheelchair automatic docking method for body-separated nursing bed based on grid map,” IEEE Access, vol. 9, pp. 79549–79561, 2021, doi: 10.1109/ACCESS.2021.3084620.
29. [30] P. Biernacki and A. Ziębiński, “The method of reflection-based marker detection and identification to ensure accurate AGV docking,” Sci. Rep., vol. 15, Art. no. 41343, 2025, DOI: 10.1038/s41598-025-25357-x.
30. [31] S. Vongbunyong, K. Thamrongaphichartkul, N. Worrasittichai, and A. Takutruea, “Automatic precision docking for autonomous mobile robot in hospital logistics—case study: battery charging,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1137, no. 1, Art. no. 012060, 2021, DOI: 10.1088/1757-899X/1137/1/012060.
31. [32] Y. Dai and K.-D. Lee, “Multi-sensor fusion for autonomous mobile robot docking: Integrating LiDAR, YOLO-based AprilTag detection, and depth-aided localization,” Electronics, vol. 14, no. 14, Art. no. 2769, 2025, DOI: 10.3390/electronics14142769.
32. [33] R. V. Bostelman and T. H. Hong, “Review of research for docking automatic guided vehicles and mobile robots,” National Institute of Standards and Technology, Gaithersburg, MD, USA, NISTIR 8140, 2016, DOI: 10.6028/NIST.IR.8140.
33. [34]F. Lamiraux and O. Lefebvre, “Sensor-based trajectory deformation: Application to reactive navigation of nonholonomic robots,” in Visual Servoing via Advanced Numerical Methods, G. Chesi and K. Hashimoto, Eds., Lecture Notes in Control and Information Sciences, vol. 401. London, U.K.: Springer, 2010, pp. 315–334, doi: 10.1007/978-1-84996-089-2_17.
34. [35] G. Nejat and B. Benhabib, “Continuous guidance for the docking of autonomous vehicles using active task-space sensing,” in Proc. IEEE Int. Conf. Mechatronics and Automation (ICMA), Niagara Falls, ON, Canada, 2005, pp. 119–124, DOI: 10.1109/ICMA.2005.1626533.
35. [36] M. Yadegar, Z. Kashi, H. Ghaderi, N. Meskin, and M. Noorizadeh, “Autonomous target docking with obstacle avoidance and final velocity control for non-holonomic mobile robots,” IEEE Trans. Autom. Sci. Eng., vol. 22, pp. 4039–4050, 2025, DOI: 10.1109/TASE.2024.3406901.
36. [37] L. Louro, D. Teixeira, T. Malheiro, L. M. R. Mesquita, T. Machado, S. Monteiro, W. Erlhagen, and E. Bicho, “A safe autonomous stacker in human shared workspaces,” in Proc. IECON 2020 – 46th Annual Conf. IEEE Industrial Electronics Society, Singapore, 2020, pp. 4389–4396, doi: 10.1109/IECON43393.2020.9255018.
37. [38] M. Colledanchise and P. Ögren, “How behavior trees modularize hybrid control systems and generalize sequential behavior compositions, the subsumption architecture, and decision trees,” IEEE Trans. Robot., vol. 33, no. 2, pp. 372–389, Apr. 2017, DOI: 10.1109/TRO.2016.2633567.
38. [39] Pilz GmbH & Co. KG, “Safety Laser Scanner PSENscan (6D000013): Technical Data,” Pilz GmbH & Co. KG, Ostfildern, Germany. [Online]. Available: https://www.pilz.com/en-INT/products/sensor-technology/safety-laser-scanner/psenscan. Accessed on: Apr. 2025.
39. [40] A. Ziębiński and P. Biernacki, “How accurate can 2D LiDAR be? A comparison of the characteristics of calibrated 2D LiDAR systems,” Sensors, vol. 25, no. 4, Art. no. 1211, 2025, DOI: 10.3390/s25041211.