Kireçtaşı ve boyut optimize edilmiş bazaltı duyarlı ısı depolama malzemesi olarak kullanan tek eğimli güneş enerjili damıtma cihazlarının termal ve damıtma performansı

Öz

Bu çalışma, doğal taşları ısı depolama malzemesi olarak kullanarak pasif güneş enerjili damıtma cihazlarının verimliliğini artırmanın pratik ve uygun maliyetli bir yolunu araştırmaktadır. Odak noktası, farklı taş türlerinin ve boyutlarının temiz su üretimi üzerindeki etkisidir. İlk aşamada, damıtma cihazının tabanında 19 mm bazalt ve kireç taşı karşılaştırılmıştır. Bazalt, koyu rengi ve yüksek ısı kapasitesi nedeniyle gün boyunca daha fazla güneş radyasyonunu emebildiği için kireç taşından daha iyi performans göstermiştir. İkinci aşamada, bazalt agregalarının partikül boyutlarının (4,75 mm, 12,5 mm ve 19 mm) verimlilik üzerindeki etkisi araştırılmıştır. 19 mm bazalt (4508 ml/m²) kullanılarak, geleneksel bir damıtma cihazına (3404 ml/m²) kıyasla 1 m² taban alanında %32,4 daha fazla ve kireç taşı damıtma cihazına (4088 ml/m²) kıyasla %10,3 daha fazla damıtılmış su üretilmiştir. Geleneksel bir damıtma cihazında, toplam damıtılmış suyun %48'i gece üretilirken, bu oran bazaltlı bir damıtma cihazında %58,2'ye ve kireçtaşı damıtma cihazında %55,5'e yükselmektedir. Özellikle, 19 mm'lik bazalt, en küçük (4,75 mm) bazalt taşlarına göre günlük %11,14 daha fazla damıtılmış su üretmiştir. Saat 17:00'de, 19 mm'lik bazalt için sistem verimliliği etkileyici bir şekilde %82,89'a ulaşmıştır. Bulgularımız, artan gözenekliliğe sahip daha büyük taşların enerjiyi daha etkili bir şekilde depoladığını ve gece boyunca suya saldığını göstermektedir. Sonuç olarak, 19 mm'lik bazalt taşlarının kullanımı, en çok ihtiyaç duyulan bölgelerde temiz su üretmek için basit, sürdürülebilir ve son derece verimli bir çözüm sunmaktadır.

Anahtar Kelimeler

• güneş enerjisi
• damıtma
• güneş enerjili damıtıcı verimliliği
• enerji depolama malzemeleri
• duyarlı ısı depolama

Thermal and distillation performance of single-slope solar stills incorporating limestone and size-optimized basalt as sensible heat storage materials

Öz

This study investigates a practical and cost effective way to improve the efficiency of passive-solar stills by using natural stones as heat storage materials. The focus is on the effect of different stone types and sizes on clean water production. In the first-stage, we compared 19 mm basalt and limestone at the base of the still. Basalt performed better than limestone because it could absorb more solar radiation throughout the day due to its dark color and high heat capacity. In the second-stage, the effect of the particle sizes of basalt aggregates (4.75 mm, 12.5 mm, and 19 mm) on efficiency was investigated. Compared to the conventional still (3404 ml/m2), the total daily distilled water yield per 1 m2 base area increased by 32.4% using 19 mm basalt (4508 ml/m2) and by 20.1% using 19 mm limestone (4088 ml/m2), indicating that the 19 mm basalt still produced 10.3% more distilled water than the limestone still. In a conventional still, 48% of the total distilled water is produced at night, while this rate increases to 58.2% in a still with basalt and 55.5% in a limestone still. Specifically, 19 mm basalt produced 11.14% more distilled water daily than the smallest (4.75 mm) basalt stones. At 17:00, the system efficiency for 19 mm basalt reached an impressive 82.89%. Our findings suggest that the superior performance of larger stones (19 mm) may be attributed to the wider inter-particle void spaces they create in the basin, which potentially facilitates better water circulation alongside effective sensible heat storage and release throughout the night. In conclusion, the use of 19 mm basalt stones offers a simple, sustainable, and highly efficient solution for producing clean water in areas where it is most needed.

Anahtar Kelimeler

• solar energy
• distillation
• solar still efficiency
• energy storage materials
• sensible heat storage

Kaynakça

1. [1] R. Dhivagar, M. Mohanraj, K. Hidouri, M. Midhun, “CFD modeling of a gravel coarse aggregate sensible heat storage assisted single slope solar still,” Desalin. Water Treat., vol. 210, pp. 54–69, 2021. https://doi.org/10.5004/dwt.2021.26554.
2. [2] S. Kılıçkap Işık, E. El, “Experimental investigation of distilled water production performance of conventional solar stills using CaCl2·6H2O phase change material reinforced with SrCl2·6H2O and graphene-based nanoparticles,” Case Studies in Thermal Eng., vol. 62, 105184, 2024. https://doi.org/10.1016/j.csite.2024.105184.
3. [3] F.O. Saad, S. Mankai, J. Madiouli, J. Sghaier, “Investigating the impact of sensible and latent heat storage materials on a single slope solar still’s performance,” Int. Symp. Syst. Adv. Technol. Knowl., IEEE. pp. 1–4, 2024. https://doi.org/10.1109/ISSATK62463.2024.10808625.
4. [4] T. Arunkumar, J. Wang, D. Winfred Rufuss, D. Denkenberger, A.E. Kabeel, “Sensible desalting: Investigation of sensible thermal storage materials in solar stills,” J. Energy Storage, vol. 32, 101824, 2020. https://doi.org/10.1016/j.est.2020.101824.
5. [5] S. Işık, C. Yıldız, “Improving thermal energy storage efficiency of solar collector tanks by placing phase change materials in novel finned-type cells,” Thermal Sci. and Eng. Prog., vol. 19, 100618, 2020. https://doi.org/10.1016/j.tsep.2020.100618.
6. [6] B. Nasri, A. Benatiallah, S. Kalloum, D. Benatiallah, “Improvement of glass solar still performance using locally available materials in the southern region of Algeria,” Groundw. Sustain. Dev., vol. 9, 100213, 2019. https://doi.org/10.1016/j.gsd.2019.100213.
7. [7] S.W. Sharshir, M.R. Sharaby, A.A. El-Naggar, M. Ismail, N.A. EL-Gawaad, M. Al-Dossari, M. El-Samadony, Z. Yuan, “Augmentation of thermo-environmental performance of hemispherical distiller utilizing low-cost thermal energy storage materials: A comparative study,” Journal of Energy Storage, vol. 113, 115619, 2025. https://doi.org/10.1016/j.est.2025.115619
8. [8] A. Sharma, V.V. Tyagi, C.R. Chen, D. Buddhi, “Review on thermal energy storage with phase change materials and applications,” Renew. Sustain. Energy Rev., vol. 13, pp. 318–345, 2009. https://doi.org/10.1016/j.rser.2007.10.005.

9. [9] V.R. Mugi, P. Das, R. Balijepalli, C. VP, “A review of natural energy storage materials used in solar dryers for food drying applications,” J. Energy Storage, vol. 49, 104198, 2022. https://doi.org/10.1016/j.est.2022.104198.
10. [10] H.P. Garg, S.C. Mullick, A.K. Bhargava, “Sensible Heat Storage,” Sol. Therm. Energy Storage, Springer Netherlands, Dordrecht, pp. 82–153, 1985. https://doi.org/10.1007/978-94-009-5301-7_2.
11. [11] J. Liu, Z. Chang, L. Wang, J. Xu, R. Kuang, Z. Wu, “Exploration of Basalt Glasses as High-Temperature Sensible Heat Storage Materials,” ACS Omega, vol. 5, pp. 19236–19246, 2020. https://doi.org/10.1021/acsomega.0c02773.
12. [12] S. Kılıçkap Işık, “Optimizing thermal performance of sodium acetate trihydrate phase-change-materials through synergistic effects of binary graphene nanoadditives for prolonged hot beverage maintenance,” Case Stud. Therm. Eng., vol. 62, pp. 105187, 2024. https://doi.org/10.1016/j.csite.2024.105187.
13. [13] K. Ucler, A. Kibar, H. Metin Ertunc, K.S. Yigit, “Investigation of a heat storage system consisting of basalt stones, water and a phase change material,” J. Energy Storage, vol. 50, 104196, 2022. https://doi.org/10.1016/j.est.2022.104196.
14. [14] P. Tatsidjodoung, N. Le Pierrès, L. Luo, “A review of potential materials for thermal energy storage in building applications,” Renew. Sustain. Energy Rev., vol. 18, pp. 327–349, 2013. https://doi.org/10.1016/j.rser.2012.10.025.
15. [15] S.M. Hasnain, “Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques,” Energy Convers. Manag., vol. 39, pp. 1127–1138, 1998. https://doi.org/10.1016/S0196-8904(98)00025-9.
16. [16] N. Muthu Saravanan, S. Rajakumar, A.A.M. Moshi, “Experimental investigation on the performance enhancement of single basin double slope solar still using kanchey marbles as sensible heat storage materials,” Mater. Today Proc., vol. 39, pp. 1600–1604, 2021. https://doi.org/10.1016/j.matpr.2020.05.710.
17. [17] L. Seyitini, B. Belgasim, C.C. Enweremadu, “Solid state sensible heat storage technology for industrial applications – A review,” J. Energy Storage, vol. 62, 106919, 2023. https://doi.org/10.1016/j.est.2023.106919.
18. [18] A.F. Mohamed, A.A. Hegazi, G.I. Sultan, E.M.S. El-Said, “Enhancement of a solar still performance by inclusion the basalt stones as a porous sensible absorber: Experimental study and thermo-economic analysis,” Sol. Energy Mater. Sol. Cells, vol. 200, 109958, 2019. https://doi.org/10.1016/j.solmat.2019.109958.
19. [19] S. Abdallah, M.M. Abu-Khader, O. Badran, “Effect of various absorbing materials on the thermal performance of solar stills,” Desalination, vol. 242, pp. 128–137, 2009. https://doi.org/10.1016/j.desal.2008.03.036.
20. [20] H.N. Panchal, “Performance analysis of solar still with cow dung cakes and blue metal stones,” Front. Energy, vol. 9, pp. 180–186, 2015. https://doi.org/10.1007/s11708-015-0361-y.
21. [21] M. Karthick, S. Joe Patrick Gnanaraj, M. Appadurai, S.B. Jeshurun, “Productivity enhancement of a single slope solar still with energy storage medium,” Mater. Today Proc., vol. 60, pp. 889–893, 2022. https://doi.org/10.1016/j.matpr.2021.09.548.
22. [22] D. Mevada, H. Panchal, M. Ahmadein, M.E. Zayed, N.A. Alsaleh, J. Djuansjah, E.B. Moustafa, A.H. Elsheikh, K.K. Sadasivuni, “Investigation and performance analysis of solar still with energy storage materials: An energy- exergy efficiency analysis,” Case Stud. Therm. Eng., vol. 29, 101687, 2022. https://doi.org/10.1016/j.csite.2021.101687.
23. [23] S. Kumaravel, M. Nagaraj, G. Bharathiraja, “Study on the performance of single slope solar still using marble stone as energy storage material,” 5th international conference on smart systems and inventive technology (ICSSIT), IEEE, pp. 278-283, 2023.
24. [24] S. Kumaravel, M. Nagaraj, G. Bharathiraja, “Experimental investigation on the performance analysis of blue metal stones and pebble stones as thermal energy storage materials in single slope solar still,” Mater. Today Proc., vol. 77, pp. 430–435, 2023. https://doi.org/10.1016/j.matpr.2022.11.100.
25. [25] M. Yuvaperiyasamy, S. Kumaravel, K. Sabari, M. Kalaimani, “Optimization of single-slope solar still with different energy storage materials using the taguchi and machine learning methods,” Results Eng., vol. 27, 106809, 2025. https://doi.org/10.1016/j.rineng.2025.106809.
26. [26] M. El Hadi Attia, M.A. Elazab, E. Cuce, A.E. Kabeel, M. Bady, “Enhancing the performance of conical solar stills through optimised flint stone placement on absorber,” Appl. Therm. Eng., vol. 283, 129016, 2026. https://doi.org/10.1016/j.applthermaleng.2025.129016.
27. [27] G. Bansal, D.B. Singh, C. Kishore, V. Dogr, “Effect of Absorbing Material on the performance of solar still: A mini review,” Mater. Today Proc., vol. 26, pp. 1884–1887, 2020. https://doi.org/10.1016/j.matpr.2020.02.412.
28. [28] A.E. Kabeel, R. Sathyamurthy, S.W. Sharshir, A. Muthumanokar, H. Panchal, N. Prakash, C. Prasad, S. Nandakumar, M.S. El Kady, “Effect of water depth on a novel absorber plate of pyramid solar still coated with TiO2 nano black paint,” J. Clean. Prod., vol. 213, pp. 185–191, 2019. https://doi.org/10.1016/j.jclepro.2018.12.185.
29. [29] H. Gunerhan, A. Hepbasli, “Utilization of basalt stone as a sensible heat storage material,” Energy Sources, vol. 27, pp. 1357–1366, 2005. https://doi.org/10.1080/009083190523253.
30. [30] H. Çanakci, R. Demirboğa, M. Burhan Karakoç, O. Şirin, “Thermal conductivity of limestone from Gaziantep (Turkey),” Build. Environ., vol. 42, pp. 1777–1782, 2007. https://doi.org/10.1016/j.buildenv.2006.01.011.
31. [31] M. Benítez-Guerrero, J. Valverde, P. Sánchez-Jiménez, A. Perejón, Pérez-Maqueda, L. “Multicycle activity of natural CaCO3 minerals for thermochemical energy storage in Concentrated Solar Power plants,” Solar Energy, vol. 153, pp. 188-199, 2017. https://doi.org/10.1016/j.solener.2017.05.068.
32. [32] A. Farzi, R. Nameni, H. Asadollahi Yazdi, “Enhancement of single slope solar still using sand: the effect of sand grain size distribution,” Journal of Solar Energy Research, vol. 6(2), pp. 740-750, 2021. https://doi.org/10.22059/JSER.2021.320642.1194.
33. [33] S. Soprani, F. Marongiu, L. Christensen, O. Alm, K.D. Petersen, T. Ulrich, K. Engelbrecht, “Design and testing of a horizontal rock bed for high temperature thermal energy storage,” Appl. Energy, vol. 251, 113345, 2019. https://doi.org/10.1016/j.apenergy.2019.113345.
34. [34] Y. Grosu, A. Faik, I. Ortega-Fernández, B. D’Aguanno, “Natural Magnetite for thermal energy storage: Excellent thermophysical properties, reversible latent heat transition and controlled thermal conductivity,” Sol. Energy Mater. Sol. Cells, vol. 161, pp. 170–176, 2017. https://doi.org/10.1016/j.solmat.2016.12.006.
35. [35] M.K. Handawy, A.E. Mahfouz, H.M. Abdelmotalib, “Experimental study and AI-optimization of a pyramid solar still with thermal storage materials,” Applied Thermal Engineering, 128032, 2025. https://doi.org/10.1016/j.applthermaleng.2025.128032.
36. [36] I. Dincer, S. Dost, X. Li, “Performance analyses of sensible heat storage systems for thermal applications,” Int. J. Energy Res., vol. 21, pp. 1157–1171, 1997. https://doi.org/10.1002/(SICI)1099-114X(19971010)21:12<1157::AID-ER317>3.0.CO;2-N.
37. [37] D.W. Waples, J.S. Waples, “A review and evaluation of specific heat capacities of rocks, minerals, and subsurface fluids. Part 1: Minerals and Nonporous Rocks,” Nat. Resour. Res., vol. 13, pp. 97–122, 2004. https://doi.org/10.1023/B:NARR.0000032647.41046.e7.
38. [38] K.G. Allen, T.W. Von Backström, D.G. Kröger, A.F.M. Kisters, “Rock bed storage for solar thermal power plants: Rock characteristics, suitability, and availability,” Sol. Energy Mater. Sol. Cells, vol. 126, pp. 170–183, 2014. https://doi.org/10.1016/j.solmat.2014.03.030.
39. [39] S.J.P. Gnanaraj, V. Velmurugan, “Experimental investigation on the performance of modified single basin double slope solar stills,” Int. J. Ambient Energy, vol. 43, pp. 206–215, 2022. https://doi.org/10.1080/01430750.2019.1636861.
40. [40] A. Agrawal, R.S. Rana, P.K. Srivastava, “Heat transfer coefficients and productivity of a single slope single basin solar still in Indian climatic condition: Experimental and theoretical comparison,” Resour. Technol., vol. 3, pp. 466–482, 2017. https://doi.org/10.1016/j.reffit.2017.05.003.
41. [41] A.E. Kabeel, R. Sathyamurthy, A.M. Manokar, S.W. Sharshir, F.A. Essa, A.H. Elshiekh, “Experimental study on tubular solar still using graphene oxide nano particles in phase change material (NPCM’s) for fresh water production,” J. Energy Storage, vol. 28, 2020. https://doi.org/10.1016/j.est.2020.101204.
42. [42] A.E. Kabeel, M. Abdelgaied, “Observational study of modified solar still coupled with oil serpentine loop from cylindrical parabolic concentrator and phase changing material under basin,” Sol. Energy, vol. 144, pp. 71–78, 2017. https://doi.org/10.1016/j.solener.2017.01.007.
43. [43] A.E. Kabeel, M. Abdelgaied, A. Eisa, “Enhancing the performance of single basin solar still using high thermal conductivity sensible storage materials,” J. Clean. Prod., vol. 183, pp. 20–25, 2018. https://doi.org/10.1016/j.jclepro.2018.02.144.
44. [44] A. Bilal, B. Jamil, N.U. Haque, M.A. Ansari, “Investigating the effect of pumice stones sensible heat storage on the performance of a solar still,” Groundw. Sustain. Dev., vol. 9, 100228, 2019. https://doi.org/10.1016/j.gsd.2019.100228.
45. [45] J.P. Holman, “Experimental methods for engineers eighth edition,” 2021.
46. [46] F.A. Essa, A.S. Abdullah, W.H. Alawee, A. Alarjani, U.F. Alqsair, S. Shanmugan, Z.M. Omara, M.M. Younes, “Experimental enhancement of tubular solar still performance using rotating cylinder, nanoparticles’ coating, parabolic solar concentrator, and phase change material,” Case Stud. Therm. Eng., vol. 29, 2022. https://doi.org/10.1016/j.csite.2021.101705.
47. [47] E. El, S. Kılıçkap Işık, “Enhancing solar distillation efficiency with sodium acetate trihydrate phase change material integrated with graphene-based nanoparticles,” Case Stud. Therm. Eng., vol. 75, 107109, 2025. https://doi.org/10.1016/j.csite.2025.107109. [48] A.S. Abdullah, F.A. Essa, H. Ben Bacha, Z.M. Omara, “Improving the trays solar still performance using reflectors and phase change material with nanoparticles,” J. Energy Storage, vol. 31, 101744, 2020. https://doi.org/10.1016/j.est.2020.101744.
48. [49] J.H. Tan, Y.Y. Liew, R. Bahar, H.K. Jun, J. Low, “Enhancing solar still productivity in tropical climate with conductive particle-assisted phase change material,” Sol. Energy Mater. Sol. Cells, vol. 279, 113227, 2025. https://doi.org/10.1016/j.solmat.2024.113227.