Termal Sprey Yöntemi Kullanılarak Al2O3 Tozları ile Kaplanmış X6Cr17 Ferritik Paslanmaz Çelik Yüzeylerin Aşınma Dirençleri

Yıl 2020, Cilt: 11 Sayı: 3, 1167 - 1173, 30.09.2020

Hülya Durmuş , Mustafa Türkmen , Uğur Çalıgülü

https://doi.org/10.24012/dumf.741145

Öz

Bu çalışmanın amacı, X6Cr17 ferritik paslanmaz çeliklerin yüzey özelliklerini, termal sprey yöntemlerden biri olan plazma sprey yöntemini kullanarak 0-100 um, 100-200 um ve 200-300 um kalınlığında Al2O3-Ti02 tozları ile kaplayarak geliştirmektir. Kaplama işleminden sonra numunelerin aşınma direnci araştırılmıştır. Aşınma Testleri, ASTM G133 standardına göre disk üzerinde pim yöntemi ile gerçekleştirilmiştir. Sonuçların incelenmesinden sonra, A3 numunesinin en yüksek aşınma direncine sahip olduğu gözlenmiştir.

Anahtar Kelimeler

X6Cr17, Al2O3, TiO2, Termal sprey kaplama

Wear Resistances of X6Cr17 Ferritic Stainless Steel Surfaces Coated with Al2O3 Powders Using Thermal Spray Method

Öz

The aim of this study was to improve the surface properties of the X6Cr17 ferritic stainless steels by coating with the Al2O3-TiO2 powders in the thickness of 0-100μm, 100-200μm and 200-300μm by using the plasma spray method, one of thermal spray methods. Wear resistance of the samples was investigated after the coating process. The tests were carried out by pin-on-disc method according to ASTM G133 standard. After examination of the results, it was observed highest abrasion resistance of A3 sample. It was concluded that the abrasion resistance in the high hardness sample does not mean that it will be good due to the high hardness.

Anahtar Kelimeler

X6Cr17, Al2O3, TiO2, Thermal spray coating, Wear resistance

Kaynakça

• 1. Taskin M.; Caligulu U.; Kolukisa S. The effect of welding speed on the laser welding of X6Cr17 Ferritic stainless steel with AISI 1010 low Carbon steels. Practical Metallography 2009, 46, 11, pp. 598-607.
• 2. Akın, U. Investigation of Wear Behavior of Ceramic and Ceramic-Polymer Coatings Coated with Thermal Spray Method on Aluminum Base, Master Thesis, Istanbul Technical University, Institute of Science and Technology, 2003.
• 3. Davis, J.R. Thermal Spray Processes, Handbook of Thermal Spray Technology, International ASM, 329. ASM İnternational, USA, 2004.
• 4. Aran, A.; Temel, M.A. Production, Use and Standards of Stainless Steels, Saritas Technical Publication, Istanbul, 2004.
• 5. Kambur, K., The Effect of Different Substrate Temperatures on Coating Properties in Coating of Ti6Al4V alloy with HA. Master's thesis, Manisa Celal Bayar University, Turkey, 2018.
• 6. Durmuş H ; Çömez N ; Gül C ; Yurddaşkal M . Farklı Kimyasal İçeriğe Sahip Tellerin İki Pasolu Sert Dolgulu Malzemelerin Aşınma Davranışına Etkileri. Muş Alparslan Üniversitesi Fen Bilimleri Dergisi. 2018; 6(2): 561-564.
• 7. AWS Committee, Thermal Spraying: Practice, Theory, and Application, American Welding Society Inc, 12-15, 1997.
• 8. Hidalgo, V.H.; Varela, F.J.B.; Martinez, S.P. A comparative study of high-temperature erosion wear of plasma sprayed NiCrBSiFe and WC-NiCrBSiFe coatings under simulated coal-fired boiler conditions, Tribology International, 2001, 24, 161–169.
• 9. Islak,S.; Ozorak, C.; Kucuk, O.; Akkas, M.; Sezgin, C. Microstructure and Hardness Properties of high velocity oxygen fuel (HVOF) Sprayed WCCo-SiC Coatings, Kastamonu University, Journal of Engineering and Science, 2015, Vol.1, pp. 1–7.
• 10. Rajarathnam D. R. P.; Jayaraman M. Investigation of the wear behaviour of an AISI 1040 forged steel shaft with plasma-spray ceramic-oxide coatings for sugar-cane mills. Materiali in tehnologije, 2017. 51(6), 939-944.
• 11. Sert, Y., Examining Wear Properties of Textile Piece Coated with Plasma Spray Technique, Master's thesis, Sakarya University Institute of Science, Sakarya, 2007.
• 12. Aslan O., Examining Corrosion Behaviors of Single and Double layered AISI 316L Stainless Steel Coated by Plasma Spray Coating, Afyon Kocatepe University, Afyon, 2015.
• 13. Islak, S ; Özorak, C ; Eski, Ö . Plazma Sprey Yöntemiyle AISI 304 Paslanmaz Çelik Üzerinde Üretilen Ti3SiC2 MAX Fazlı Kaplamanın Karakterizasyonu. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, 2019, 8 (1), 206-213. DOI: 10.17798/bitlisfen.453085
• 14. Irsat C., Determining Corrosion Behavior of Al-12Si Plasma Spray Composite Coatings Reinforced with In-Situ Al2O3 Phases, Master's thesis, Atatürk University Institute of Science, 2016.