Kolofan Tabanlı Biyo-Epoksi Reçinesinin Mekanik Özellikleri

Yıl 2018, , 387 - 393, 31.05.2018

Gökhan Demircan , Murat Kısa , Mustafa Özen

https://doi.org/10.31202/ecjse.382750

Öz

Boyama, yapıştırma ve kaplama gibi çeşitli
endüstriyel alanlarda yaygın olarak kullanılan epoksi reçineleri, termoset
grubuna ait reçinelerdir. Yüksek mekanik özelliklere sahip olan bu reçineler kompozit
malzeme üretiminde matris malzemesi olarak kullanılırlar. Epoksi reçinelerinin
cam, karbon veya aramid gibi liflerle birleştirilmesiyle üretilen kompozit
malzemeler uzay, denizcilik ve havacılık uygulamalarında kullanılmaktadır.
Epoksi reçinelerinin çoğu endüstriyel olarak üretilmekte ve üretim safhasında
kullanılan hammaddeler büyük oranda petrol esaslı olmaktadır. Petrol esaslı
malzemeler yerine biyo-tabanlı bitkisel malzemeler üretmek her geçen gün daha
da önemli hale gelmektedir. Bu malzemeler petrole bağımlılığı azaltmakta ve doğada
bolca bulunan ve ucuz olan bitkisel materyallerin kullanımını teşvik
etmektedir. Bu çalışmada, petrol bazlı epoksi reçinesi ile çam reçinesinden
elde edilen kolofan maddesi belirli oranlarda birleştirilerek biyo-tabanlı bir
epoksi reçinesi üretildi ve bu reçinenin mekanik ve termal özellikleri incelendi.

Anahtar Kelimeler

Epoksi reçinesi, Mekanik Özellikler, Kolofan

Mechanical Properties of Rosin-based Bio-epoxy Resin

Öz

Epoxy
resins which are widely used in various industrial fields such as painting,
bonding, and coating, are resins of thermosetting group. These resins, which
have high mechanical properties, are used as matrix material in composite
material production. Composite materials produced by combining epoxy resins
with fibers such as glass, carbon or aramid, are used in aerospace, marine and aviation
applications. Most of the epoxy resins are industrially produced and the raw
materials used in the production phase are largely petroleum-based. Today, it
is increasingly important to produce bio-based plant materials instead of
petroleum-based materials. These materials reduce dependence on petroleum and
encourage the use of cheaper plant materials found abundantly in the
environment. In this study, a bio-based epoxy resin was produced by combining
petroleum-based epoxy resin and rosin obtained from wood resin at certain
ratios. Then, their mechanical and thermal properties were investigated.

Anahtar Kelimeler

Epoxy resin, Mechanical properties, Rosin

Kaynakça

• Ellis, B., (1993). Chemistry and Technology of Epoxy Resins. Chapman & Hall, British Library eBook, p.342
• Park, S.-J., Jin, F.-L. and Lee, J.-R., (2004). Synthesis and Thermal Properties of Epoxidized Vegetable Oil. Macromolecular Rapid Communications, 25(6), p.724–727.
• Liu, Z., Erhan, S.Z. and Xu, J., (2005). Preparation, characterization and mechanical properties of epoxidized soybean oil/clay nanocomposites. Polymer, 46(23), p.10119–10127.
• Paramarta, A., and Webster, D.C., (2016). Bio-based high performance epoxy-anhydride thermosets for structural composites: The effect of composition variables. Reactive and Functional Polymers, 105; p.140–149.
• Xia, Y. and Larock, R.C., (2010). Vegetable oil-based polymeric materials: synthesis, properties, and applications. Green Chemistry, 12(11); p.1893–1909.
• Miao, S., Wang, P., Su, Z. and Zhang, S., (2014). Vegetable-oil-based polymers as future polymeric biomaterials. Acta Biomaterialia, 10(4); p.1692–1704.
• Auvergne, R., Caillol, S., David, G., Boutevin, B. and Pascault, J.-P., (2013). Biobased thermosetting epoxy: present and future. Chemical Reviews, 114(2); p.1082–1115.
• [8] Raquez, J.M., Deléglise, M., Lacrampe, M.F. and Krawczak P., (2010). Thermosetting (bio)materials derived from renewable resources: a critical review. Progress in Polymer Science, 35(4): p.487–509.
• Montero de Espinosa L. and Meier, M.A.R., (2011). Plant oils: the perfect renewable resource for polymer science?!. European Polymer Journal, 47(5); p.837–852.
• Coppen J.J.W. and Hone G.A., (1995). Gum Naval Stores: Turpentine and Rosin from Pine Resin. UN Food and Agriculture Organization, chap. 1.
• Maiti, S., Ray, S.S. and Kundu, A.K., (1989). Rosin: a renewable resource for polymers and polymer chemicals. Progress in Polymer Science, 14(3), p.297-338.
• Liu, X., Xin, W. and Zhang, J., (2009). Rosin-based acid anhydrides as alternatives to petrochemical curing agents. Green Chemistry, 11(7); p.1018–1025.
• Liu, X., Xin, W. and Zhang, J., (2010). Rosin-derived imide-diacids as epoxy curing agents for enhanced performance. Bioresource technology, 101(7); p.2520-2524.
• Atta, A.M., Mansour, R., Abdou, M.I., El-Sayed, A.M., (2005). Synthesis and characterization of tetra-functional epoxy resins from rosin. Journal of Polymer Research, 12(2); p.127-138.
• Deng, L., Ha, C., Sun, C., Zhou, B., Yu, J., Shen, M., and Mo, J., (2013). Properties of Bio-based Epoxy Resins from Rosin with Different Flexible Chains. Industrial & Engineering Chemistry Research, 52(37), p.13233−13240.