Evaluation of Mechanical and Water Absorption Behaviours of Corn Shell/Pumice Reinforced Epoxy Composites

Öz

The research article focused on the effect of corn shell reinforced with epoxy composites. The randomly oriented corn shell reinforced/epoxy composites were prepared by hand lay-up technique with 5%, 10%, 15%, 20%, and 25% pomice powder weight. Tensile, flexural, and water absorption tests were used to determine the composite’s mechanical properties, The obtained results revealed that 20 wt% and 15 wt% pumice powdercould produce corn shell -reinforced composite with the highest tensile strength, flexural strength, and interfacial adhesion among all the prepared composites. The added of the pumice powder into the corn shell /epoxy composites enhanced their mechanical, and water absorption. The tensile and flexural strengths of the corn shell/pumice powde –epoxy composites (20wt% and 15wt%) were 11.745 and 11.250 MPa, respectively. In additon, The 25 wt.%, composite also displayed less water absorption behavior compared to the other composite.

Anahtar Kelimeler

• Natural fibers
• Pumice
• Mechanical properties
• Composite
• Water resistance

Evaluation of Mechanical and Water Absorption Behaviours of Corn Shell/Pumice Reinforced Epoxy Composites

Abstract

Bu çalışmada, Mısır kabuğu takviyeli-pomza tozu doldurulmuş epoksi resin matrisli kompozit malzemeler üretilmiştir. Bu malzemelerin Çekme, Eğme ve su emme direnci Ölçülmüştür. Bu amaç doğrultusunda matris elemanı olarak epoksi, takviye elemanı olarak mısır kabuğu kullanılarak elle yatırma yöntemi ile kompozit malzemeler üretilmiştir. Çalışma kapsamında ayrıca dolgu maddesi olarak 250 mesh altında ağırlıkça farklı yüzde oranlarda pomza tozu kullanılarak kompozit numuneleri de yapılmıştır. Üretilen kompozitlerde pomza tozu eklenmeden ve pomza tozunun eklenmesiyle çekme, eğme ve su emme özellikleri üzerindeki etkisi değerlendirilmiştir. Elde edilen sonuçlara göre, ağırlıkça %20 ve %15 pomza tozu katkılı kompozitin çekme ve eğilme sonuçları sırasıyla, 11.745 ve 11.250MPa olarak bulunmuş ve mekanik özelliklerini iyileştirdiği görülmüştür. Ayrıca, Ağırlıkça %25 Pomza tozu dolgulu kompozit diğer pomza tozu katkılı kompozitlere göre daha az su emme özelliği göstermiştir.

Keywords

• Pumice
• Composite
• Water resistance

Kaynakça

1. Gopinath, R., Billigraham, P., Sathishkumar, T.P., sanjay, M.R., Suchart, S. (2021). Characterization of Sida acuta fiber and its polymer composites with effect of fly ash. Journal of Natural fibers, 1-19.
2. Vignesha, V., . Balajib, A.N., Karthikeyanc, M.V.(2017). Effect of wood sawdust filler on the mechanical properties of Indian mallow fiber yarn mat reinforced with polyester composites. International of polymer analyisi and characterization, 22(7), 610-621.
3. Minelli, M., Angelıs, M.G.D., Doghıerı, F., Rocchetti, M.,Montenero, A. (2010). Effect of silica nanopowder on the properties of wood flour/ polymer composite. Polym. Eng. Sci., 50: 144.
4. Soundhar, A., , J. (2021). Chemical and Morphological Analysis of Crab shell/Sisal Natural Fiber Hybrid Composites. Journal natural Fibers,18(10),1518-1531.
5. Khana ,T., M. T. H. Sultan, Shah ,A. U. M., Ariffina , A. H., Jawaid, M. (2021).The Effects of Stacking Sequence on the Tensile and Flexural Properties of Kenaf/Jute Fibre Hybrid Composites. journal Natural Fibers, 18(3), 452-463.
6. Venkatasudhahar, M., Ravichandran, A.T., Dilipraja, N. (2021). Effect of stacking sequence on mechanical and moisture absorption properties of abaca-kenaf-carbon fiber reinforced hybrid composite. Journal natural Fibers, 1-12.
7. Wikipeadia The free Encyclopedia, data of access : (7/11/2021).
8. Koyuncu, M. (2018). The influence of pumice dust on tensıle, stiffness properties and flame retardant of epoxy/ wood flour composıtes.Journal of Tropical Forest Science 30(1): 89–94 (2018) https://doi.org/10.26525/jtfs2018.30.1.8994

9. Rashiddadash, p., Rumezanianpour, A-A., Mahdikhani, M. (2014). Experimental investigation on flexural toughness of hybrid fiber reinforced concrete(HFRC) containning metakaolin and pumcie. Construction and Building material.51, 313-320..
10. Nyior, G.B., Aye, S.A. and Tile, S.E. (2018). Study of Mechanical Properties of Raffia Palm Fibre/Groundnut Shell Reinforced Epoxy Hybrid Composites. Journal of Minerals and Materials Characterization and Engineering, 6, 179-192
11. Chung T-J., Park J-W., Ji Lee H., Kwon H-J., Kim H-J., Lee Y-K., Tai Yin Tze W. (2018). The improvement of mechanical properties, thermal stability, and water absorption resistance of an ecofriendly PLA/Kenaf biocomposite using acetylation. Applied Sciences, (8): 376 doi/10.3390/aap.80330376
12. Bolasodun, B., Durowaye, S., Rufai, I., Lawal, G. (2020). .Effects of Cure Temperature on the Mechanical Properties of Coconut Shell and Snail Shell Particles Reinforced Polyester Matrix Composites. Acta Materialia Turcica, 4,9-17
13. Sun, T., Fan, H., Wang, Z., Liu, X., Wu, Z. (2015). Modified nano Fe2O3-epoxy composite with enhanced mechanical properties. Materials and design,87, 10-16.
14. Prosper, O., Uguru, H. (2018). Effect of Fillers Loading on the Mechanical Properties of Hardwood Sawdust/Oil Bean Shell Reinforced Epoxy Hybrid Composite. Int J S Res Sci. Engg. Tech. 4(8), 620-62.
15. Ismail, H., Edyhan, M. Wirjosentono, B. (2002). Bamboo Fiber Filled Natural Rubber Composites: The Effects of Filler Loading and Bonding Agent. Polymer Testing, 21, 139-144. https://doi.org/10.1016/S0142-9418(01)00060-5
16. Masoodi, R., pillai, K-M. (2012). A study on moisture absorption and swelling in bio-based jute-epoxy composites. Journal refinforced Plastic&composites, 3(5),285-294.
17. Zahari,W. Z. W., Badril, R. N. R. L., Ardyananta,H., Kurniawan, D., Nor, F. M. (2015). Mechanical Properties and Water Absorption Behavior of Polypropylene / Ijuk Fiber Composite by Using Silane TreatmenProcedia Manufacturing. Procedia Manufacturing (2), 573 – 578
18. Bher, A., Unalan, U., Auras, I., Rubino, R.M.,, Schvezov, C.E.(2018). Toughening of poly(lactic acid) and thermoplastic cassava starch reactive blends using graphene nanoplatelets. Polymers, 10(1),1-18.