DESIGN AND ANALYSIS OF QUADRATIC BOOST CONVERTER WITH INDUCTOR-CAPACITOR-DIODE VOLTAGE MULTIPLIER CIRCUIT

Yıl 2021, Cilt: 11 Sayı: 1, 23 - 28, 01.06.2021

Mustafa İnci

Öz

In the current study, design and analysis of quadratic boost dc-dc converter with a voltage multiplier are presented. An additional inductor-capacitor-diode (LCD) circuit is implemented as a voltage multiplier in the designed converter. In comparison with conventional boost converter, the designed quadratic boost converter based on LCD circuit provides high gain voltage conversion with high efficiency. These properties make the designed converter practicable for sustainable energy implementations. The proposed converter is used to obtain higher output voltages employing equal input voltages in comparison with traditional boost converter, two-level cascade boost converter and traditional quadratic boost dc-dc converter. In the current study, operational principles of quadratic boost dc-dc converter with voltage multiplier circuit are clarified in detail. The relationship between input voltage and output voltage is formulized analytically and mathematical analysis of quadratic boost converter with voltage multiplier circuit is comprehensively given for smooth dc-dc converter operation. Subsequently, a controller scheme based on proportional-integral (PI) is presented for quadratic boost converter integrated with LCD circuit. In the performance results, the operational waveforms of the designed converter are performed by using Simulink simulation program. Voltage gain analysis of designed converter versus conventional boost converters is compared to show the voltage conversion rates for different duty cycle values. In the designed converter, the input voltage is adjusted as a 24 V dc voltage source. At load side, the resistive load in the rating of 80 Ω consumes 720 W active power. In addition, input/output voltages, power waveforms and current waveforms are introduced.

Anahtar Kelimeler

Dc-dc converters, High gain, Quadratic boost converter, Voltage multiplier circuit

Kaynakça

• [1] A. Affam, Y. M. Buswig, A.-K. B. H. Othman, N. B. Julai, and O. Qays, "A review of multiple input DC-DC converter topologies linked with hybrid electric vehicles and renewable energy systems," Renewable and Sustainable Energy Reviews, vol. 135, p. 110186, 2021.
• [2] M. Rezvanyvardom and A. Mirzaei, "High gain configuration of modified ZVT SEPIC-Boost DC-DC converter with coupled inductors for photovoltaic applications," Solar Energy, vol. 208, pp. 357-367, 2020.
• [3] H. Wang, A. Gaillard, and D. Hissel, "A review of DC/DC converter-based electrochemical impedance spectroscopy for fuel cell electric vehicles," Renewable Energy, vol. 141, pp. 124-138, 2019.
• [4] Q. Qi, D. Ghaderi, and J. M. Guerrero, "Sliding mode controller-based switched-capacitor-based high DC gain and low voltage stress DC-DC boost converter for photovoltaic applications," International Journal of Electrical Power & Energy Systems, vol. 125, p. 106496, 2021.
• [5] M. M. Savrun and M. İnci, "Adaptive neuro-fuzzy inference system combined with genetic algorithm to improve power extraction capability in fuel cell applications," Journal of Cleaner Production, vol. 299, p. 126944, 2021.
• [6] F. L. Tofoli, D. d. C. Pereira, W. J. d. Paula, and D. d. S. O. Júnior, "Survey on non-isolated high-voltage step-up dc–dc topologies based on the boost converter," IET Power Electronics, vol. 8, pp. 2044-2057, 2015.
• [7] M. İnci, "Interline fuel cell (I-FC) system with dual-functional control capability," International Journal of Hydrogen Energy, vol. 45, pp. 891-903, 2020.
• [8] M. İnci, M. Büyük, M. M. Savrun, and M. H. Demir, "Design and Analysis of Fuel Cell Vehicle-to-Grid (FCV2G) System with High Voltage Conversion Interface for Sustainable Energy Production," Sustainable Cities and Society, vol. 67, p. 102753, 2021.
• [9] M. İnci, M. Büyük, M. H. Demir, and G. İlbey, "A review and research on fuel cell electric vehicles: Topologies, power electronic converters, energy management methods, technical challenges, marketing and future aspects," Renewable and Sustainable Energy Reviews, vol. 137, p. 110648, 2021.
• [10] J. Voss, J. Henn, and R. W. D. Doncker, "Control techniques of the auxiliary-resonant commutated pole with special regards on the dual-active bridge DC-DC converter," CPSS Transactions on Power Electronics and Applications, vol. 3, pp. 352-361, 2018.
• [11] Ö. Çelik, A. Tan, M. Inci, and A. Teke, "Improvement of energy harvesting capability in grid-connected photovoltaic micro-inverters," Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, pp. 1-25, 2020.
• [12] D. López del Moral, A. Barrado, M. Sanz, A. Lázaro, C. Fernández, and P. Zumel, "Analysis and implementation of the Autotransformer Forward-Flyback converter applied to photovoltaic systems," Solar Energy, vol. 194, pp. 995-1012, 2019.
• [13] H. Wu, T. Mu, H. Ge, and Y. Xing, "Full-Range Soft-Switching-Isolated Buck-Boost Converters With Integrated Interleaved Boost Converter and Phase-Shifted Control," IEEE Transactions on Power Electronics, vol. 31, pp. 987-999, 2016.
• [14] F. Jian, Z. Bo, Q. Dongyuan, and X. Wenxun, "A novel single-switch cascaded DC-DC converter of Boost and Buck-boost converters," in 2014 16th European Conference on Power Electronics and Applications, 2014, pp. 1-9.
• [15] A. Sferlazza, C. Albea-Sanchez, and G. Garcia, "A hybrid control strategy for quadratic boost converters with inductor currents estimation," Control Engineering Practice, vol. 103, p. 104602, 2020.
• [16] S. Shoja-Majidabad and A. Hajizadeh, "Decentralized adaptive neural network control of cascaded DC–DC converters with high voltage conversion ratio," Applied Soft Computing, vol. 86, p. 105878, 2020.
• [17] R. Reshma Gopi and S. Sreejith, "Converter topologies in photovoltaic applications – A review," Renewable and Sustainable Energy Reviews, vol. 94, pp. 1-14, 2018. [18] B. Sri Revathi and M. Prabhakar, "Non isolated high gain DC-DC converter topologies for PV applications – A comprehensive review," Renewable and Sustainable Energy Reviews, vol. 66, pp. 920-933, 2016.
• [19] M. İnci, K. Ç. Bayindir, and M. Tümay, "The performance improvement of dynamic voltage restorer based on bidirectional dc–dc converter," Electrical Engineering, vol. 99, pp. 285-300, 2017.
• [20] J. Leyva-Ramos, R. Mota-Varona, M. G. Ortiz-Lopez, L. H. Diaz-Saldierna, and D. Langarica-Cordoba, "Control Strategy of a Quadratic Boost Converter With Voltage Multiplier Cell for High-Voltage Gain," IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 5, pp. 1761-1770, 2017.
• [21] Y. Ping, X. Jianping, Z. Guohua, and Z. Shiyu, "A new quadratic boost converter with high voltage step-up ratio and reduced voltage stress," in Proceedings of The 7th International Power Electronics and Motion Control Conference, 2012, pp. 1164-1168.
• [22] I. Laoprom, S. Tunyasrirut, W. Permpoonsinsup, and D. Puangdownreong, "Voltage Control with PI Controller for Four Phase Interleaved Boost Converter," in 16th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), 2019, pp. 278-281.
• [23] M. İnci, "Active/reactive energy control scheme for grid-connected fuel cell system with local inductive loads," Energy, vol. 197, p. 117191, 2020.