Cilt: 11 Sayı: 2, 30.12.2021

Yıl: 2021

Araştırma Makalesi

European Journal of Technique (EJT) established in 2010. It is a peer –reviewed international journal to be of interest and use to all those concerned with research in various fields of, or closely related to, Engineering disciplines. European Journal of Technique (EJT) aims to provide a highly readable and valuable addition to the literature which will serve as an indispensable reference tool for years to come. The coverage of the journal includes all new theoretical and experimental findings in the fields of Engineering or any closely related fields. The journal also encourages the submission of critical review articles covering advances in recent research of such fields as well as technical notes.

  • Mechanical Engineering
  • Textile Engineering
  • Electrical-Electronics Engineering
  • Computer and Informatics Engineering
  • Civil and Architecture Engineering
  • Mining Engineering
  • Chemical Engineering
  • Metallurgical and Materials Engineering
  • Environmental Engineering
  • Food Engineering
  • Geological Engineering
  • Industrial Engineering
  • Renewable Energy

IMPORTANT INFORMATION FOR AUTHORS

To make paper processing time shorter, Editorial Board of the journal European Journal of Technique accepted stronger rules for preparing manuscripts. The most important change is that maximum number of pages for scientific papers is now 12 pages (for review papers 20 pages) prepared according Instructions for preparing manuscripts.

New rules for preparing manuscripts are summarized in the following documents:

§   European Journal of Technique – Instructions for preparing manuscripts (Please click here or open in new tab)

§   European Journal of Technique – Reference list specification

Also, each author or corresponding author of the manuscript is obliged to fulfill and sign:

§   European Journal of Technique – Authors' check list

European Journal of Technique – Check list should be sent with the manuscript.

Manuscript will be considered only on the understanding that it is not currently being submitted to other journals.

Submission of an article implies that the results described has not been published previously (except in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication elsewhere, that its publication is approved by all authors and that, if accepted, it will not be published elsewhere in the same form, in English or in any other language, without the written consent of the Publisher.

Authors are obliged to follow remarks and comments of the reviewers, as well as to follow Instructions for preparing manuscripts Reference list specification and technical remarks and corrections of the Editorial Board.

Corresponding author is obliged to send Authors' check list , fulfilled and signed.

Papers will be published in English, and authors are obliged to submit papers free of typing errors (please use Spell Checking).

Editorial Board has right to make small lector corrections and to shorten text of the paper, which would not influence author's ideas and presentation. After computer lay-out of the paper, authors will obtain text as .pdf file for approval.

The manuscripts, not exceeding 12 pages (for review papers maximum 20 pages), including figures and tables, should be submitted in electronic form only in MS Word (.doc file) or LaTex format (.tex file), and submit to: Dergipark System

 

For each author full name, personal (or first) name(s) and family (or last) name(s), and affiliation, have to be given. Family or last name(s) has to be written in capital letters. In the case of more than one author, the name of corresponding author should be indicated, with full postal address, e-mail address, and affiliation.

Each paper has to be written according to following order: title, author(s), affiliation(s), abstract, key words, body of the text with numerated sections and subsections including introduction, conclusions, acknowledgment (if necessary), nomenclature, and references. Pages must have page numbers.

Each author and coauthor have the possibility to subscribe for 10 reprints of their paper (for details, see our subscription page).

 

Copyright Policy; 

Copyright of all accepted papers will belong to EJT and the author(s) must affirm that accepted papers for publication in EJT must not be re-published elsewhere without the written consent of the editor in chief/director of EJT. To comply with this policy, authors will be required to submit a signed copy of CopyrightTransfer Form, after acceptance of their paper, before the same is published. Copyright form availble at

https://dergipark.org.tr/tr/download/journal-file/15317

Authors note that paper can not be withdrawn at any condition once it is accepted. The Authors may not publish his/her The Author may not publish his/her contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. The Author warrants that his/her contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libellous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others.  The Author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. In return for these rights:

All proprietary rights other than copyrights, such as patent rights.

The right to use all or part of this article, including tables and figures in future works of their own, provided that the proper acknowledgment is made to the Publisher as copyright holder.

The right to make copies of this article for his/her own use, but not for sale.

It is the responsibility of each author to ensure that papers submitted to the journal are written with ethical standards in mind, concerning plagiarism. Please note that all submissions are thoroughly checked for plagiarism. If an attempt at plagiarism is found in a published paper, the authors will be asked to issue a written apology to the authors of the original material. Any paper which shows obvious signs of plagiarism will be automatically rejected and its authors may be banned for duration of 10 years from publishing in Journal. The authors will receive proper notification if such a situation arises.

This paper has not been published in the same form elsewhere.

It will not be submitted anywhere else for publication prior to acceptance/rejection by EJT.

 Ethics;

Papers must be submitted on the understanding that they have not been published elsewhere and are not currently under consideration by another journal. The submitting author is responsible for ensuring that the article’s publication has been approved by all the other coauthors. When an author discovers a significant error or inaccuracy in his/her own published work, it is the author's obligation to notify the publisher and cooperate with the editor to retract or correct the paper. It is also the authors’ responsibility to ensure that the articles emanating from a particular institution are submitted with the approval of the necessary institution. Only an acknowledgment from the editorial office officially establishes the date of receipt. Further correspondence and proofs will be sent to the author(s) before publication unless otherwise indicated. It is a condition of submission of a paper that the authors permit editing of the paper for readability.

EJT is committed to following the Code of Conduct   and   Best Practice Guidelines   of COPE (Committee on Publication Ethics) . It is a duty of our editors to follow Cope Guidance for Editors   and our peer-reviewers must follow COPE Ethical Guidelines for Peer Reviewers .

If you have any questions, please contact the relevant editorial office, or European Journal of Technique (EJT)' ethics representative: ejtineseg@gmail.com

Download a PDF version of the Ethics and Policies [PDF,392KB].


Copyright Policy;

Copyright of all accepted papers will belong to EJT and the author(s) must affirm that accepted papers for publication in EJT must not be re-published elsewhere without the written consent of the editor in chief/director of EJT. To comply with this policy, authors will be required to submit a signed copy of CopyrightTransfer Form, after acceptance of their paper, before the same is published. Copyright form availble at

https://dergipark.org.tr/tr/download/journal-file/15317

Authors note that paper can not be withdrawn at any condition once it is accepted. The Authors may not publish his/her The Author may not publish his/her contribution anywhere else without the prior written permission of the publisher unless it has been changed substantially. The Author warrants that his/her contribution is original, except for such excerpts from copyrighted works as may be included with the permission of the copyright holder and author thereof, that it contains no libellous statements, and does not infringe on any copyright, trademark, patent, statutory right, or propriety right of others. The Author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. In return for these rights:

All proprietary rights other than copyrights, such as patent rights.

The right to use all or part of this article, including tables and figures in future works of their own, provided that the proper acknowledgment is made to the Publisher as copyright holder.

The right to make copies of this article for his/her own use, but not for sale.

It is the responsibility of each author to ensure that papers submitted to the journal are written with ethical standards in mind, concerning plagiarism. Please note that all submissions are thoroughly checked for plagiarism. If an attempt at plagiarism is found in a published paper, the authors will be asked to issue a written apology to the authors of the original material. Any paper which shows obvious signs of plagiarism will be automatically rejected and its authors may be banned for duration of 10 years from publishing in Journal. The authors will receive proper notification if such a situation arises.

This paper has not been published in the same form elsewhere.

It will not be submitted anywhere else for publication prior to acceptance/rejection by EJT.


Ethics;

Papers must be submitted on the understanding that they have not been published elsewhere and are not currently under consideration by another journal. The submitting author is responsible for ensuring that the article’s publication has been approved by all the other coauthors. When an author discovers a significant error or inaccuracy in his/her own published work, it is the author's obligation to notify the publisher and cooperate with the editor to retract or correct the paper. It is also the authors’ responsibility to ensure that the articles emanating from a particular institution are submitted with the approval of the necessary institution. Only an acknowledgment from the editorial office officially establishes the date of receipt. Further correspondence and proofs will be sent to the author(s) before publication unless otherwise indicated. It is a condition of submission of a paper that the authors permit editing of the paper for readability.


EJT is committed to following the Code of Conduct and Best Practice Guidelines of COPE (Committee on Publication Ethics) . It is a duty of our editors to follow Cope Guidance for Editors and our peer-reviewers must follow COPE Ethical Guidelines for Peer Reviewers .

If you have any questions, please contact the relevant editorial office, or European Journal of Technique (EJT)' ethics representative: ejtineseg@gmail.com


Download a PDF version of the Ethics and Policies [PDF,392KB].

All articles published by EJT are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisansı