Araştırma Makalesi
BibTex RIS Kaynak Göster
Yıl 2021, Cilt: 11 Sayı: 2, 234 - 238, 30.12.2021
https://doi.org/10.36222/ejt.811334

Öz

Kaynakça

  • Referans1 Akman O. Ürkmez A.,2005, Asenkron Motor Tasarımının Bilgisayar Programı İle Gerçekleştirilmesi, Makina Tek Dergisi.
  • Referans2 Ward, E.E., and Ha¨rer, H.: ‘Preliminary investigation of an invertor-fed 5-phase induction motor’, Proc. IEE., 1969, 116, (6), pp. 980–984.
  • Referans3 Y. Zhao, T.A. Lipo, “Space- vector PWM control of dual three phase induction machine using vector space decomposition”, IEEE Trans. on Ind. Appin., Vol.31, No.5 Sept./Oct.1995.
  • Referans4 G.K. Singh, “Multiphase induction machine drive research – a survey”, Electric Power system Research, Vol.61, 2002, pp.139-147
  • Referans5 Sarıoğlu, M.K., Boğosyan, S. Ve Gökaşan, M. (2003), Asenkron Makinalar ve Kontrolü, Birsen Yayınevi, 392 s.
  • Referans6 K. Gopalkumar, Mahopatra, “A novel scheme for six phase induction motor with open end windings.” 28th Annual Conference of IEEE Industrial Electronics Society, Spain. 5th - 8 th November, 2002.
  • Referans7 Emil Levi, “Recent Developments in High Performance VariableSpeed Multiphase Induction Motor Drives” Sixth International Symposium Nikola Tesla, Belgrade, Serbia. 18th – 20th October, 2006.
  • Referans8 Gülez K., 1999, Asenkron Motorların DSP (Sayısal İşaret İşleyici) Tabanlı Bir Kontrol Sistemi Kullanarak YSA (Yapay Sinir Ağları) ile Performansının Artırılması, Doktora Tezi, Yıldız Teknik Üniversitesi.

Comparative Analysis of Six Phase Induction Motor

Yıl 2021, Cilt: 11 Sayı: 2, 234 - 238, 30.12.2021
https://doi.org/10.36222/ejt.811334

Öz

In recent years, AC induction motors have replaced DC motor. The most important reason for this is that DC motors have a mechanical brush and commutator system that is subject to wear and tear over time. While DC motor drivers need a lot of maintenance due to this system, induction motors do not require almost any maintenance since this system is not available. In recent years, technological advances in the field of multiphase induction motors have led to a significant evolution. A lot of research has been done around the world and a lot of new and interesting developments have been reported to the literature.
This paper provides information about six-phase induction. In addition, what kind of advantages the concept of multiphase provides and how this structure is formed contains information about them. The six-phase induction motor will be simulated through the MATLAB/SIMULINK package program and compare with three phase induction motor. Both motors were run in simulation using the same parameters. At the end of the simulation, current, moment and speed graphs of the six-phase induction motor and three-phase induction motor will be drawn according to time. The study also included equations used during modeling and equivalent circuits belonging to a six-phase induction motor. It has been graphically shown that a six-phase induction motor is more advantageous than a three-phase motor. For example, in six-phase induction motors, the transition time to a continuous state is shorter. In addition, while the frequency of torque vibration increases, its amplitude decreases, the current value of each phase decreases, the stator copper losses are less than the three-phase induction motor. In motors, usually the power needed is divided by the number of phases. So the more phases there are, the greater the power carrying capacity. Today, multi-phase induction motor drives are used in special applications such as electric vehicles, space technology, aerospace applications, as moving power on ships, electric trains, which require high reliability and power.

Kaynakça

  • Referans1 Akman O. Ürkmez A.,2005, Asenkron Motor Tasarımının Bilgisayar Programı İle Gerçekleştirilmesi, Makina Tek Dergisi.
  • Referans2 Ward, E.E., and Ha¨rer, H.: ‘Preliminary investigation of an invertor-fed 5-phase induction motor’, Proc. IEE., 1969, 116, (6), pp. 980–984.
  • Referans3 Y. Zhao, T.A. Lipo, “Space- vector PWM control of dual three phase induction machine using vector space decomposition”, IEEE Trans. on Ind. Appin., Vol.31, No.5 Sept./Oct.1995.
  • Referans4 G.K. Singh, “Multiphase induction machine drive research – a survey”, Electric Power system Research, Vol.61, 2002, pp.139-147
  • Referans5 Sarıoğlu, M.K., Boğosyan, S. Ve Gökaşan, M. (2003), Asenkron Makinalar ve Kontrolü, Birsen Yayınevi, 392 s.
  • Referans6 K. Gopalkumar, Mahopatra, “A novel scheme for six phase induction motor with open end windings.” 28th Annual Conference of IEEE Industrial Electronics Society, Spain. 5th - 8 th November, 2002.
  • Referans7 Emil Levi, “Recent Developments in High Performance VariableSpeed Multiphase Induction Motor Drives” Sixth International Symposium Nikola Tesla, Belgrade, Serbia. 18th – 20th October, 2006.
  • Referans8 Gülez K., 1999, Asenkron Motorların DSP (Sayısal İşaret İşleyici) Tabanlı Bir Kontrol Sistemi Kullanarak YSA (Yapay Sinir Ağları) ile Performansının Artırılması, Doktora Tezi, Yıldız Teknik Üniversitesi.
Toplam 8 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Elektrik Mühendisliği
Bölüm Araştırma Makalesi
Yazarlar

İsmail Sarıgül 0000-0001-8440-5918

Mehmet Özdemir 0000-0002-1178-060X

Yayımlanma Tarihi 30 Aralık 2021
Yayımlandığı Sayı Yıl 2021 Cilt: 11 Sayı: 2

Kaynak Göster

APA Sarıgül, İ., & Özdemir, M. (2021). Comparative Analysis of Six Phase Induction Motor. European Journal of Technique (EJT), 11(2), 234-238. https://doi.org/10.36222/ejt.811334

All articles published by EJT are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisansı