Vat Fotopolimerizasyon Baskı Teknolojisinin ve Fotopolimer Rezinlerin İmplant Destekli Sabit Protezlerde Kullanımı

Öz

Dijital iş akışının diş hekimliğinde giderek yaygınlaşmasıyla birlikte, bilgisayar yardımlı tasarım ve bilgisayar yardımlı üretim tekniklerine üç boyutlu baskı teknolojisi de dahil olmuştur. Günümüzde eksiltmeli üretimin yerini almaya başlayan bu teknoloji, kişiye özgü tasarımlar ve yüksek hassasiyetli çözümler sunarak diş hekimliğindeki tedavi süreçlerini hızlandırmakta ve klinik açıdan tatmin edici sonuçların elde edilmesini sağlamaktadır. Üç boyutlu baskı teknolojisiyle üretilen materyallerin implant destekli sabit protezlerde kullanımı, son yıllarda yeni bir uygulama olarak protetik diş tedavisinde yerini almıştır. İmplant destekli sabit protezlerde model ve kişisel ölçü kaşığı üretiminde kullanılmaya başlanan bu teknoloji, özellikle fotopolimer rezinlerle birlikte vat fotopolimerizasyon yöntemi aracılığıyla geçici ve daimi restorasyon üretiminde de yaygınlaşmaktadır. Bu alanda yapılan çalışmalar sonucunda fotopolimer rezinlerin başarılı performansları, implant destekli sabit protezlerde kullanımlarını daha etkin bir hale getirmiştir. Yöntemin ve materyallerin yeni olması sebebiyle literatürdeki mevcut eksiklik, ağız ortamının gereksinimlerini tam olarak karşılama konusunda henüz yeterli bilgi sunmamaktadır. Ancak, üç boyutlu ve dört boyutlu baskı teknolojilerindeki sürekli gelişmeler, gelecekteki çalışmalarla bu endişelerin giderileceği yönünde umut vadetmektedir. Bu derleme çalışmasında vat fotopolimerizasyon baskı teknolojisinin ve fotopolimer rezinlerin implant destekli sabit protezlerde kullanımı ile ilgili güncel literatür bilgisinin verilmesi amaçlanmıştır.

Anahtar Kelimeler

• Dental rezinler
• implant-destekli diş protezi
• printing
• üç boyutlu

The Use of Vat Photopolymerızatıon Printing Technology And Photopolymer Resins in Implant-Supported Fixed Prostheses

Öz

With the increasing prevalence of digital workflows in dentistry, three-dimensional printing technology has been incorporated into computer-aided design and computer-aided manufacturing techniques. This technology, which is gradually replacing subtractive manufacturing methods, accelerates treatment processes in dentistry and enables clinically satisfactory outcomes by offering patient-specific designs and high-precision solutions. The use of materials produced with three-dimensional printing technology in implant-supported fixed prostheses has recently emerged as a new application in prosthetic dental treatment. Initially utilized to create models and custom impression trays in implant-supported fixed prostheses, this technology has increasingly been adopted to fabricate temporary and permanent restorations, particularly through the vat photopolymerization method using photopolymer resins. Studies conducted in this field have demonstrated the successful performance of photopolymer resins, thereby enhancing their applicability in implant-supported fixed prostheses. However, due to the novelty of both the method and the materials, current literature provides limited data regarding their ability to fully meet the requirements of the oral environment. Nevertheless, ongoing advancements in three-dimensional and four-dimensional printing technologies offer promising prospects for addressing these concerns in future studies. This review presents current literature on vat photopolymerization printing technology and photopolymer resins in implant-supported fixed prostheses.

Anahtar Kelimeler

• Dental resins
• implant-supported dental prosthesis
• printing
• three-dimensional

Kaynakça

1. Wang Y, Genina N, Müllertz A, Rantanen J. Binder jetting 3D printing in fabricating pharmaceutical solid products for precision medicine. Basic Clin Pharmacol Toxicol. 2024;134(3):325-332. doi:10.1111/bcpt.13974
2. Yüceer ÖM, Kaynak Öztürk E, Çiçek ES, Aktaş N, Bankoğlu Güngör M. Three-dimensional-printed photopolymer resin materials: A narrative review on their production techniques and applications in dentistry. Polymers (Basel). 2025;17(3):316. doi:10.3390/polym17030316
3. Revilla-León M, Sadeghpour M, Özcan M. An update on applications of 3D printing technologies used for processing polymers used in implant dentistry. Odontology. 2020;108(3):331-338. doi:10.1007/s10266-019-00441-7
4. Quan H, Zhang T, Xu H, Luo S, Nie J, Zhu X. Photo-curing 3D printing technique and its challenges. Bioact Mater. 2020;5(1):110-115. doi:10.1016/j.bioactmat.2019.12.003
5. Guerrero-Gironés J, López-García S, Pecci-Lloret MR, Pecci-Lloret MP, Rodríguez Lozano FJ, García-Bernal D. In vitro biocompatibility testing of 3D printing and conventional resins for occlusal devices. J Dent. 2022;123:104163. doi:10.1016/j.jdent.2022.104163
6. Kim GT, Go HB, Yu JH, et al. Cytotoxicity, colour stability and dimensional accuracy of 3D printing resin with three different photoinitiators. Polymers (Basel). 2022;14(5):979. doi:10.3390/polym14050979
7. Wuersching SN, Hickel R, Edelhoff D, Kollmuss M. Initial biocompatibility of novel resins for 3D printed fixed dental prostheses. Dent Mater. 2022;38(10):1587-1597. doi:10.1016/j.dental.2022.08.001
8. Caussin E, Moussally C, Le Goff S, et al. Vat photopolymerization 3D printing in dentistry: A comprehensive review of actual popular technologies. Materials (Basel). 2024;17(4):950. doi:10.3390/ma17040950

9. Shaukat U, Rossegger E, Schlögl S. A review of multi-material 3D printing of functional materials via vat photopolymerization. Polymers (Basel). 2022;14(12):2449. doi:10.3390/polym14122449
10. Junk S, Bär F. Design guidelines for additive manufacturing using masked stereolithography mSLA. Procedia CIRP. 2023;119:1122–1127. doi:10.1016/j.procir.2023.01.022
11. Lee BJ. Continuous liquid interface production (CLIP): A new paradigm in photopolymerization-based additive manufacturing. JMST Advances. 2024;1-7. doi:10.1007/s42791-024-00090-0
12. Pagac M, Hajnys J, Ma QP, et al. A review of vat photopolymerization technology: materials, applications, challenges, and future trends of 3D printing. Polymers (Basel). 2021;13(4):598. doi:10.3390/polym13040598
13. Jeong M, Radomski K, Lopez D, Liu JT, Lee JD, Lee SJ. Materials and applications of 3D printing technology in dentistry: an overview. Dent J (Basel). 2023;12(1):1. doi:10.3390/dj12010001
14. Huang X, Peng S, Zheng L, Zhuo D, Wu L, Weng Z. 3D printing of high viscosity UV-curable resin for highly stretchable and resilient elastomer. Adv Mater. 2023;35(49):e2304430. doi:10.1002/adma.202304430
15. Cai H, Xu X, Lu X, et al. Dental materials applied to 3D and 4D printing technologies: a review. Polymers (Basel). 2023;15(10):2405. doi:10.3390/polym15102405
16. Lin CH, Lin YM, Lai YL, Lee SY. Mechanical properties, accuracy, and cytotoxicity of UV-polymerized 3D printing resins composed of Bis-EMA, UDMA, and TEGDMA. J Prosthet Dent. 2020;123(2):349-354. doi:10.1016/j.prosdent.2019.05.002
17. Peerzada M, Abbasi S, Lau KT, Hameed N. Additive manufacturing of epoxy resins: Materials, methods, and latest trends. Industrial & Engineering Chemistry Research. 2020;59(14):6375-6390. doi:10.1021/acs.iecr.9b06870
18. Buda M, Bratos M, Sorensen JA. Accuracy of 3-dimensional computer-aided manufactured single-tooth implant definitive casts. J Prosthet Dent. 2018;120(6):913-918. doi:10.1016/j.prosdent.2018.02.011
19. Revilla-León M, Sánchez-Rubio JL, Oteo-Calatayud J, Özcan M. Impression technique for a complete-arch prosthesis with multiple implants using additive manufacturing technologies. J Prosthet Dent. 2017;117(6):714-720. doi:10.1016/j.prosdent.2016.08.036
20. Yang X, Liu Y, Li Y, Zhao Y, Di P. Accuracy and feasibility of 3D-printed custom open trays for impressions of multiple implants: A self-controlled clinical trial. J Prosthet Dent. 2022;128(3):396-403. doi:10.1016/j.prosdent.2020.11.016
21. Piedra Cascón W, Revilla-León M. Digital workflow for the design and additively manufacture of a splinted framework and custom tray for the impression of multiple implants: A dental technique. J Prosthet Dent. 2018;120(6):805-811. doi:10.1016/j.prosdent.2018.02.003
22. Park JY, Jeong ID, Lee JJ, Bae SY, Kim JH, Kim WC. In vitro assessment of the marginal and internal fits of interim implant restorations fabricated with different methods. J Prosthet Dent. 2016;116(4):536-542. doi:10.1016/j.prosdent.2016.03.012
23. Bayoumi AES, Shokry TE, Mohammed HR. Effect of thermo-mechanical loading on the fracture resistance of implant-supported provisional FDP fabricated by CAD/CAM and 3D printing: An in-vitro study. Al-Azhar Journal of Dental Science. 2022;25(1):31-41. doi: 10.21608/ajdsm.2021.82890.1215
24. de Souza FA, Blois MC, Collares K, Dos Santos MBF. 3D-printed and conventional provisional single crown fabrication on anterior implants: A randomized clinical trial. Dent Mater. 2024;40(2):340-347. doi:10.1016/j.dental.2023.12.004
25. Donmez MB, Okutan Y. Marginal gap and fracture resistance of implant-supported 3D-printed definitive composite crowns: An in vitro study. J Dent. 2022;124:104216. doi:10.1016/j.jdent.2022.104216
26. Martín-Ortega N, Sallorenzo A, Casajús J, Cervera A, Revilla-León M, Gómez-Polo M. Fracture resistance of additive manufactured and milled implant-supported interim crowns. J Prosthet Dent. 2022;127(2):267-274. doi:10.1016/j.prosdent.2020.11.017
27. Suralik KM, Sun J, Chen CY, Lee SJ. Effect of fabrication method on fracture strength of provisional implant-supported fixed dental prostheses. Prosthesis. 2020;2(4):325-332. doi:10.3390/prosthesis2040030
28. Elsareef SS, Azer AS, Morsy N. Evaluation of fracture resistance and marginal fit of implant-supported interim crowns fabricated by conventional, additive and subtractive methods. BMC Oral Health. 2024;24(1):852. doi:10.1186/s12903-024-04597-9
29. Barazanchi A, Li KC, Al-Amleh B, Lyons K, Waddell JN. Additive technology: Update on current materials and applications in dentistry. J Prosthodont. 2017;26(2):156-163. doi:10.1111/jopr.12510
30. Demirel M, Diken Türksayar AA, Donmez MB. Fabrication trueness and internal fit of hybrid abutment crowns fabricated by using additively and subtractively manufactured resins. J Dent. 2023;136:104621. doi:10.1016/j.jdent.2023.104621
31. Diken Türksayar AA, Demirel M, Donmez MB, Olcay EO, Eyüboğlu TF, Özcan M. Comparison of wear and fracture resistance of additively and subtractively manufactured screw-retained, implant-supported crowns. J Prosthet Dent. 2024;132(1):154-164. doi:10.1016/j.prosdent.2023.06.017
32. Südbeck S, Hoffmann M, Reymus M, Buser R, Edelhoff D, Stawarczyk B. Bending moment of implants restored with CAD/CAM polymer-based restoration materials with or without a titanium base before and after artificial aging. Dent Mater. 2022;38(9):e245-e255. doi:10.1016/j.dental.2022.06.009
33. Maldonado P, Dönmez MB, Güven ME, et al. Digital analysis of fabrication accuracy and fit in additively and subtractively manufactured implant-supported fixed complete dentures. J Dent. 2024;150:105332. doi:10.1016/j.jdent.2024.105332
34. Venezia P, Torsello F, Santomauro V, Dibello V, Cavalcanti R. Full digital workflow for the treatment of an edentulous patient with guided surgery, immediate loading and 3D-printed hybrid prosthesis: The BARI technique 2.0. A case report. Int J Environ Res Public Health. 2019;16(24):5160. doi:10.3390/ijerph16245160
35. Azpiazu-Flores FX, Lee DJ, Jurado CA, Nurrohman H. 3D-printed overlay template for diagnosis and planning complete arch implant prostheses. Healthcare (Basel). 2023;11(8):1062. doi:10.3390/healthcare11081062
36. Lanis A, Alvarez Del Canto O, Barriga P, Polido WD, Morton D. Computer-guided implant surgery and full-arch immediate loading with prefabricated-metal framework-provisional prosthesis created from a 3D printed model. J Esthet Restor Dent. 2019;31(3):199-208. doi:10.1111/jerd.12458
37. Brenes C, Bencharit S, Fox T. Evaluation of prosthetic outcomes and patient satisfaction with 3D-printed implant-supported fixed prosthesis. Cureus. 2023;15(7):e42537. doi:10.7759/cureus.42537
38. Mangano FG, Yang KR, Lerner H, et al. 3D-printed short-span hybrid composite implant-supported restorations fabricated through tilting stereolithography: A retrospective clinical study on 85 patients with 1 year of follow-up. J Dent. 2024;147:105095. doi:10.1016/j.jdent.2024.105095
39. Perambudhuru Y, Goyal L, Dewan M, Mahajan A, Chaudhari PK. Application of 4D printing in dentistry: A narrative review. J Adv Periodontol Implant Dent. 2024;16(1):55-63. doi:10.34172/japid.2024.003