Renklendirme solüsyonunda bekletme süresi ve yüzey bitirme işlemlerinin monolitik zirkonyanın rengine etkisi

Yıl 2023, , 48 - 54, 02.05.2023

Ceyda Başak İnal , Merve Bankoğlu Güngör , Seçil Karakoca Nemli

https://doi.org/10.17214/gaziaot.1123071

Cited By: 1

Öz

Amaç: Bu çalışmanın amacı, renklendirme solüsyonunda farklı sürelerde bekletmenin ve farklı yüzey bitirme işlemlerinin kendinden renkli ve renksiz monolitik zirkonya üzerindeki renk değişiminin incelenmesidir.
Gereç ve Yöntem: Monolitik zirkonyadan hazırlanan 240 adet örnek, renklendirme solüsyonunu rengine (A1, A2 ve A3), solüsyonda bekletme süresine (3, 5, ve 7 dakika) ve yüzey bitirme işlemlerine (glaze ve mekanik parlatma) göre gruplara ayrıldı (n=10). Örneklerin CIE L *, a * ve b * değerleri ölçüldü ve renk farklılıkları (ΔE) hesaplandı. Veriler üç yönlü varyans analizi (ANOVA) ve Tukey HSD testi (α =.05) ile analiz edildi.
Bulgular: Solüsyon ile renklendirme, bekletme süresi ve yüzey bitirme işlemleri CIE L*, a* ve b* değerlerini (P<.001) önemli ölçüde etkiledi. Solüsyonla renklendirme uygulaması a* ve b* değerlerini azalttı. Glaze gruplarında mekanik polisaj gruplarından daha yüksek L* değerleri elde edildi. Gruplar arasındaki ΔE değerleri 7,10 ile 27,52 arasında değişmektedir. En yüksek renk farkı, A3 renkli solüsyonun 7 dk. uygulandığı ve mekanik polisaj uygulanan gruplarda gözlemlendi.
Sonuç: Kendinden renkli ve solüsyonla renklendirilmiş zirkonya örnekler arasındaki renk farkı kabul edilebilir sınırlar içinde değildir. Renklendirme solüsyonlarında bekletme ve yüzey bitirme işlemleri solüsyon ile renklendirilen monolitik zirkonyanın rengini etkilemektedir.

Anahtar Kelimeler

Diş parlatma, protezi renklendirme, renk, zirkonya

Destekleyen Kurum

TÜBİTAK

Proje Numarası

119S837

Effects of dipping time in coloring liquids and surface finishing technique on the color of monolithic zirconia

Öz

Objective: The objective of this study was to investigate the effects of liquid coloring in different dipping times and finishing procedures on color difference of precolored and liquid-colored monolithic zirconia ceramics.
Materials and Methods: 240 zirconia specimens were divided according to shades of coloring liquid (A1, A2, and A3), dipping time (3, 5, and 7 minutes), and surface finishing procedures (glaze and mechanical polishing) (n=10). CIE L*, a*, and b* values of the specimens were measured and color differences (ΔE) were calculated. The data were analyzed with three-way analysis of variance (ANOVA) and Tukey HSD test (α=.05).
Results: Coloring with liquids, dipping time, and finishing procedures significantly affected the CIE L*, a*, and b* values (P<.001). Dipping in coloring liquids decreased the a* and b* values. Higher L* values were obtained in glazing groups than mechanical polishing groups. The ΔE values among the experimental groups were varied from 7.10 to 27.52. The highest color difference was observed in 7 min dipping in A3 liquid and mechanically polished group.
Conclusion: The color difference between the precolored and liquid-colored zirconia ceramics are not in acceptable limits. Dipping in coloring liquids and surface finishing affect the color of liquid-colored monolithic zirconia.

Anahtar Kelimeler

Dental polishing, color, prosthesis coloring, zirconium

Proje Numarası

119S837

Kaynakça

• 1. Giti R, Hojati SA. Effect of varying thickness and number of coloring liquid applications on the color of anatomic contour monolithic zirconia ceramics. J Dent 2018;19:311-19.
• 2. Yu N-K, Park M-G. Effect of different coloring liquids on the flexural strength of multilayered zirconia. J Adv Prosthodont 2019;11:209-14.
• 3. Nam J-Y, Park M-G. Effects of treatment with aqueous and acid-based coloring liquid on the color of zirconia. J Prosthet Dent 2019;121:363 e1-e5.
• 4. Donmez MB, Olcay EO, Demirel M. Influence of coloring liquid immersion on flexural strength, vickers hardness, and color of zirconia. J Prosthet Dent 2021;10.1016/j.prosdent.2020.11.020.
• 5. Sulaiman TA, Abdulmajeed AA, Donovan TE, Vallittu PK, Närhi TO, Lassila LV. The effect of staining and vacuum sintering on optical and mechanical properties of partially and fully stabilized monolithic zirconia. Dent Mater J 2015;34:605-10.
• 6. Nam J-Y, Park M-G. Effects of aqueous and acid-based coloring liquids on the hardness of zirconia restorations: J Prosthet Dent 2017;117:662-8.
• 7. Ekren O. The effect of coloring liquid dipping time on the fracture load and color of zirconia ceramics. J Adv Prosthodont 2017;9:67-73.
• 8. Kim H-K, Kim S-H. Effect of the number of coloring liquid applications on the optical properties of monolithic zirconia. Dent Mater 2014;30:229-37.
• 9. Celik S, Ucar Y, Ekren O. Effect of coloring liquids on color of zirconia frameworks and bond strength of zirconia/veneering ceramic. J Prosthet Dent 2020;124:110-5.
• 10. Shah K, Holloway J, Denry I. Effect of coloring with various metal oxides on the microstructure, color, and flexural strength of 3Y-TZP. J Biomed Mater Res B Appl Biomater 2008;87:329-37.
• 11. Oh G-J, Lee K, Lee D-J, Lim H-P, Yun K-D, Ban J-S, et al. Effect of metal chloride solutions on coloration and biaxial flexural strength of yttria-stabilized zirconia. Met Mater Int 2012;18:805-12.
• 12. Commission Internationale de l’Eclairage (CIE). Colorimetry, CIE 015. 3rd ed. Vienna: CIE Central Bureau; 2004.
• 13. Akar GC, Pekkan G, Çal E, Eskitaşçıoğlu G, Özcan, M. Effects of surface-finishing protocols on the roughness, color change, and translucency of different ceramic systems. J Prosthet Dent 2014;112:314-21.
• 14. Tabatabaian F, Karimi M, Namdari M. Color match of high translucency monolithic zirconia restorations with different thicknesses and backgrounds. J Esthet Dent 2020;32:615-21.
• 15. Papageorgiou-Kyrana A, Kokoti M, Kontonasaki E, Koidis P. Evaluation of color stability of preshaded and liquid-shaded monolithic zirconia. J Prosthet Dent 2018;119:467-72.
• 16. Kim I-J, Lee Y-K, Lim B-S, Kim C-W. Effect of surface topography on the color of dental porcelain. J Mater Sci Mater Med 2003;14:405-9.
• 17. Saker S, Özcan M. Effect of surface finishing and polishing procedures on color properties and translucency of monolithic zirconia restorations at varying thickness. J Esthet Restor Dent 2020;1-11.
• 18. Bayindir F, Koseoglu M. The effect of restoration thickness and resin cement shade on the color and translucency of a high-translucency monolithic zirconia. J Prosthet Dent 2020;123:149-54.
• 19. Kim H-K, Kim S-H, Lee J-B, Han J-S, Yeo I-S, Ha S-R. Effect of the amount of thickness reduction on color and translucency of dental monolithic zirconia ceramics. J Adv Prosthodont 2016;8:337-42.
• 20. Kaya G. Production and characterization of self-colored dental zirconia blocks. Ceram Int 2013;39:511-17.
• 21. Ahangari AH, Ardakani KT, Mahdavi F, Ardakani MT. The effect of two shading techniques on value of zirconia-based crowns. J Dent 2015;16:129-33.
• 22. Auzani ML, Dapieve KS, Zucuni CP, Pereira GKR, Valandro LF. Influence of shading technique on mechanical fatigue performance and optical properties of a 4Y-TZP ceramic for monolithic restorations. J Mech Behav Biomed Mater 2020;102:103457.
• 23. Mahmood DJH, Braian M, Khan A-S, Shabaz A, Larsson C. Fracture load of colored and non-colored high translucent zirconia three-unit fixed dental prosthesis frameworks. Acta Biomater Odontol Scand 2018;4:38-43.
• 24. Douglas RD, Steinhauer TJ, Wee AG. Intraoral determination of the tolerance of dentists for perceptibility and acceptability of shade mismatch. J Prosthet Dent 2007;97:200-8.
• 25. Ghinea R, Pérez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J Dent 2010;38:57-64.
• 26. Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, et al. Color difference thresholds in dentistry. J Esthet Dent 2015;27:S1-S9.
• 27. Kim H-K, Kim S-H, Lee J-B, Ha SR. Effects of surface treatments on the translucency, opalescence, and surface texture of dental monolithic zirconia ceramics. J Prosthet Dent 2016;115:773-9.
• 28. Huh YH, Yang EC, Park CJ, Cho, LR. In vitro evaluation of the polishing effect and optical properties of monolithic zirconia. J Prosthet Dent 2018;119:994-9.