GIDA TOZLARI: ÖZELLİKLERİ VE KARAKTERİZASYONU

Öz

Gıda tozlarının daha iyi anlaşılması, gıda sanayide kullanılan üretim tekniklerinin iyileştirilmesi, üretimverimlerinin artırılması, üretim hattındaki kayıpların azaltılması, temizlik için üretime ara verilme zamanıve sıklığının azaltılması ve etkin proses alet/ekipman dizaynı için gıda tozlarının fiziksel, kimyasal vedavranış özelliklerinin karakterize edilmesi gereklidir. Gıda maddelerinden elde edilen toz ürünlerinkarmaşık yapıları nedeniyle, istenen kalite ve özelliklerde ürün elde edilebilmesi için toz partiküllerininşekil, boyut, fizikokimyasal yapı, çözünme gücü ve partiküller arası yapışma kuvveti gibi özelliklerinkontrol edilmesi gereklidir. Proses maliyetlerini azaltmak ve gıda proseslerinin ve bu proseslerdekullanılan alet/ekipmanların dizaynını doğru yapabilmek, toz kütlesi akışı, akışa karşı direnç, kekoluşturma potansiyeli ve yüzeylere yapışma kuvveti gibi özelliklerin iyi anlaşılmasını gerektirir. Buaraştırmada gıda tozlarının genel özellikleri ve günümüze kadar kullanılan bazı karakterizasyontekniklerinden bahsedilmiştir. Ayrıca, gıda tozları mühendisliği alanında yapılan çalışmaların ve partikülkarakterizasyonunun sağlayabileceği potansiyel faydalara değinilmiştir

Anahtar Kelimeler

• Gıda tozları, partikül karakterizasyonu, toz gıda üretimi

FOOD POWDERS: PROPERTIES AND CHARACTERIZATION

Öz

Characterization of physical, chemical and behavioral properties of food powders are necessary andneed to be done to better understand food powders, to improve production techniques used, to increaseproduction efficiency, to reduce the losses in the process line, to reduce the down-time for cleaningand frequency, and to design process equipment used in the food industry effectively. Due to thecomplex structure of powdered products produced from food materials, to obtain the desired properties andquality in the final product, it is necessary to control the properties such as size, shape, physico-chemicalstructure, dissolution, and particle cohesion. Better understanding of powder mass flow, resistance toflow, cake forming potential and adhesion strength onto the surfaces is required to reduce processingcosts and to design processes and equipment correctly. In this review, information about generalproperties of food powders and some characterization techniques are given. Additionally, potentialbenefits which can be derived from research in food powders engineering field and particle characterizationare discussed

Anahtar Kelimeler

• Food powders, particle characterization, powdered food production

Kaynakça

1. Marabi A, Mayora G, Burbidge A, Wallach R, Saguy IS. 2008. Assessing dissolution kinetics of powders by a single particle approach. Chem. Eng. J., 139, 118-127.
2. Ghosal S, Indira TN, Bhattacharya S. 2010. Agglomeration of a model food powder: Effect of maltodextrin and gum Arabic dispersions on flow behavior and compacted mass. J. Food Eng, 96, 222-228.
3. Forny L, Marabi A, Palzer S. 2011. Wetting, disintegration and dissolution of agglomerated water soluble powders. Powder Technol., 206, 72-78. 4. Murrieta-Pazos I, Gaiani C, Galet L, Calvet R, Cuq B, Scher J. 2012. Food powders: Surface and form characterization revisited. J. Food Eng, 112, 1-21. 5. Fitzpatrick JJ, Iqbal T, Delaney C, Twomey T, Keogh MK. 2004. Effect of powder properties and storage conditions on the flowability of milk powders with different fat contents. J. Food Eng, 64(4), 435-444.
4. Cuq B, Rondet E, Abecassis J. 2011. Food powders engineering, between knowhow and science: Constraints, stakes and opportunities. Powder Technol., 208, 244-251.
5. Fadeyibi A, Osunde ZD, Agidi G, Evans EC. 2014. Flow and strength properties of cassava and yam starch–glycerol composites essential in the design of handling equipment for granular solids. J. Food Eng, 129:38-46.
6. Salleh FSM, Yusof YA, Anuar MS, Chin NL. 2014. Flow Propertıes Of Ficus Deltoidea Extract Powder And The Binders, Acdisol And Avicel. J. Food Process Eng., 37:63-74.
7. Dhanalakshmi K, Ghosal S, Bhattacharya S. 2011. Agglomeration of Food Powder and Applications. Crc Cr Rev Food Sci, 51:432-441.
8. Ganesana V, Rosentraterb KA, Muthukumarappana K. 2008. Flowability and handling characteristics of bulk solids and powders – a review with implications for DDGS. Biosyst Eng., 101, 425-435. 11. Fitzpatrick JJ, Barrya K, Cerqueiraa PSM, Iqbala T, O’Neilla J, Roos YH. 2007. Effect of composition and storage conditions on the flowability of dairy powders. Int Dairy J., 17, 383-392.

9. Benkovic M, Srecec S, Spoljaric I, Mrsic G, Bauman I. 2013. Flow properties of commonly used food powders and their mixtures. Food Bioprocess Tech, 6(9):2525-253.
10. Stoklosa A, Rebecca M, Lipasek A, Taylor LS, Mauer LJ. 2012. Effects of storage conditions, formulation, and particle size on moisture sorption and flowability of powders: A study of deliquescent ingredient blends. Food Res Int., 49:783-791.
11. Opalinski I, Chutkowski M, Stasiak M. 2012. Characterizing moist food-powder flowability using a Jenike shear-tester. J. Food Eng, 108:51-58.
12. Crowley SV, Gazi I, Kelly AL, Huppertz T, O’Mahony JA. 2014. Influence of protein concentration on the physical characteristics and flow properties of milk protein concentrate powders. J. Food Eng, 135:31-38.
13. Koç M, Koç B, Güngör Ö, Ertekin FK. 2012. The Effects of Moisture on Physical Properties of Spray-Dried Egg Powder. Drying Technol, 30: 567-573. 17. Kim EHJ, Chen XD, Pearce D. 2009. Surface composition of industrial spraydried milk powders. 1. Development of surface composition during manufacture. J. Food Eng, 94 (2), 163-168.
14. Palzer S. 2005. The effect of glass transition on the desired and undesired agglomeration of amorphous food powders. Chem. Eng. Sci., 60: 3959-3968.
15. Hartmann M ve Palzer S. 2011. Caking of amorphous powders — Material aspects, modelling and applications. Powder Technol., 206, 112-121. 20. Feeney J, Fitzpatrick JJ. 2011. Visualization of the Caking Behavior Between Two Powder Particles. Part. Sci. Technol., 29: 397-406.
16. Descamps N, Palzer S, Roos YH, Fitzpatrick JJ. 2013. Glass transition and flowability/caking behaviour of maltodextrin DE 21. J. Food Eng, 119, 809-813.
17. Foster KD, Bronlund JE, Paterson AHJ. 2006. Glass transition related cohesion of amorphous sugar powders. J. Food Eng, 77:997-1006.
18. Dopfer D, Palzer S, Heinrich S, Fries L, Antonyuk S, Haider C, Salman AD. 2013. Adhesion mechanisms between water soluble particles. Powder Technol, 238,35-49.
19. Domian E, Sulek A, Cenkier J, Kerschke A. 2014. Influence of agglomeration on physical characteristics and oxidative stability of spray-dried oil powder with milk protein and trehalose wall material. J. Food Eng, 125:34-43.
20. Juliano P, Muhunthan B, Barbosa-Canovas GV. 2006. Flow and shear descriptors of preconsolidated food powders. J. Food Eng, 72 157-166.
21. Jallo LJ, Chen Y, Bowen J, Etzler F, Dave R. 2011. Prediction of Inter-particle Adhesion Force from Surface Energy and Surface Roughness. J. Adhes. Sci. Technol., 25:367-384.
22. Haider CI, Althaus T, Niederreiter G, Hounslow MJ, Palzer S, Salman AD. 2012. A micromanipulation particle tester for agglomeration contact mechanism studies in a controlled environment. Meas. Sci. Technol. 23:105904.
23. Salazar-Banda GR, Felicetti MA, Gonçalves JAS, Coury JR, Aguiar ML. 2007. Determination of the adhesion force between particles and a flat surface, using the centrifuge technique. Powder Technol., 173 : 107-117.
24. Halim F, Barringer SA. 2007. Electrostatic adhesion in food. J Electrostat, 65 168-173.
25. Ermis E, Farnish RJ, Berry RJ, Bradley MSA. 2011. Centrifugal tester versus a novel design to measure particle adhesion strength and investigation of effect of physical characteristics (size, shape, density) of food particles on food surfaces. J. Food Eng, 104, 518-524
26. Ermis E, Farnish RJ, Berry RJ, Bradley MSA. 2009. Direct Measurement of Powder Flavor Adhesion onto Crisp Surface Using a Novel Adhesion Tester. Part. Sci. Technol., 27: 362-372. 32. Liu W, Christian GK, Zhang Z, Fryer PJ. 2006. Direct measurement of the force required to disrupt and remove fouling deposits of whey protein concentrate. Int Dairy J., 16, 64-172.
27. Marabi A, Raemy A, Bauwens I, Burbidge A, Wallach R, Saguy IS. 2008. Effect of fat content on the dissolution enthalpy and kinetics of a model food powder. J. Food Eng, 85, 518-527
28. Börjesson E, Innings F, Tragardh C, Bergenstahl B, Paulsson M. 2013. The dissolution behavior of individual powder particles. Dairy Sci Technol, 93(4-5) 357-371.
29. Szulc K, Lenart A. 2010. Effect of Agglomeration on Flowability of Baby Food Powders. J. Food Sci., 75(5), E276–E284.
30. Juliano P, Barbosa-Cánovas GV. 2010. Food Powders Flowability Characterization: Theory, Methods, and Applications. Annu Rev Food Sci Technol., 1: 211-239.
31. Saw HY, Davies CE, Jones JR, Paterson AHJ. 2012. Shear testing of lactose powders: The influence of consolidation stress and particle size on bulk density and estimated cohesion. Adv Powder Technol, 25: 1164-1170.
32. Kamath S, Puri VM, Manbeck HB, Hogg R. 1993. Flow properties of powders using four testers - measurement, comparison and assessment. Powder Technol., 76 (3): 277-289.
33. Freeman RE, Cooke JR, Schneider LCR. 2008. Measuring shear properties and normal stresses generated within a rotational shear cell for consolidated and nonconsolidated powders. In: Powder Technology p. 5.
34. Çağlı AS, Deveci BN, Okutan CH, Sirkeci DAA, Teoman EY. 2007. Flow property measurement using the Jenike shear cell for 7 different bulk solids. Proceedings of European Congress of Chemical Engineering (ECCE-6), Copenhagen.
35. Fitzpatrick JJ, O’Callaghan E, O’Flynn J. 2008. Application of a novel cake strength tester for investigating caking of skim milk powder. Food Bioprod Process, 86: 198-203.
36. Hanley K, Descamps N, O’Meara K, Jones C, Walsh D, Fitzpatrick JJ. 2010. Influence of humidity cycling on the caking behavior of three food powders. Sixth World Congress on Particle Technology, Nuremberg, Germany.
37. Paterson AHJ, Brooks GF, Bronlund JE, Foster KD. 2005. Development of stickiness in amorphous lactose at constant T-Tg levels. Int Dairy J., 15(5), 513-519.
38. Jayasundera M, Adhikari BP, Adhikari R, Aldred P. 2010. The effect of food-grade low- molecular-weight surfactants and sodium caseinate on spray drying of sugar-rich foods. Food Biophys., 5 (2), 128-137.
39. Saad M, Gaiani C, Mullet M, Scher J, Cuq B. 2011. X-ray photoelectron spectroscopy for wheat powders: measurement of surface chemical composition. J. Agric. Food Chem., 59 (5), 1527-1540. 46. Stevens JS, Schroeder SLM. 2009. Quantitative analysis of saccharides by X-ray photoelectron spectroscopy. Surf. Interface Anal., 41 (6), 453-462.
40. Murrieta-Pazos I, Gaiani C, Galet L, Cuq B, Desobry S, Scher J. 2011. Comparative study of particle structure evolution during water sorption: skim and whole milk powders. Colloids Surf., B, 87 (1), 1-10.
41. Fyfe KN, Kravchuk O, Le T, Deeth HC, Nguyen AV, Bhandari B. 2011. Storage induced changes to high protein powders: influence on surface properties and solubility. J. Sci. Food Agric., 91 (14), 2566-2575.
42. Funami T. 2010. Atomic force microscopy imaging of food polysaccharides. Food Sci Technol Res., 16 (1), 1-12.
43. Olivares ML, Passeggi MCG, Ferron J, Zorrilla SE, Rubiolo AC. 2010. Study of milk/kappa-carrageenan mixtures by atomic force microscopy. Food Hydrocolloids, 24 (8), 776-782.
44. Gunning AP, Kirby AR, Parker ML, Cross KL, Morris J. 2010. Utilizing atomic force microscopy in food research. Food Technol., 64 (12), 32-37.
45. Vignolles ML, Lopez C, Ehrhardt JJ, Lambert J, Mejean S, Jeantet R, Schuck P. 2009. Methods’ combination to investigate the suprastructure, composition and properties of fat in fat-filled dairy powders. J. Food Eng, 94 (2), 154-162.
46. Paramita V, Iida K, Yoshii H, Furuta T. 2010. Effect of feed liquid temperature on the structural morphologies of d-limonene microencapsulated powder and its preservation. J. Food Sci., 75 (1), E39-E45.
47. Gaiani C, Boyanova P, Hussain R, Murrieta Pazos I, Karam MC, Burgain J, Scher J. 2011. Morphological descriptors and colour as a tool to better understand rehydration properties of dairy powders. Int Dairy J., 21 (7), 462-469.
48. Jones MD, Young P,Train D. 2012. The use of inverse gas chromatography for the study of lactose and pharmaceutical materials used in dry powder inhalers. Adv Drug Deliver Rev, 64(3): 285-293.
49. Goode KR, Bowen J, Akhtar N, Robbins PT, Fryer PJ. 2013. The effect of temperature on adhesion forces between surfaces and model foods containing whey protein and sugar. J. Food Eng, 118(4): 371-379.
50. Shimada Y, Yonezawa Y, Sunada H. 2003. Measurement and evaluation of the adhesive force between particles by the direct separation method. J Pharm Sci, 92 (3): 560–568.
51. Awad BS. 2011. High-Power Ultrasound in Surface Cleaning and Decontamination. Ultrasound Technologies for Food and Bioprocessing Food Engineering Series, 545-558.
52. Zafar U, Hare C, Hassanpour A, Ghadiri M. 2014. Drop test: A new method to measure the particle adhesion force. Powder Technol, 264: 236-241.
53. Enggalhardjo M, Narsimhan G. 2005. Adhesion of Dry Seasoning Particles onto Tortilla Chip. J Food Sci, (70 (3) E215–E222.