Bibliometric Analysis of Scientific Publications on the Lapping Process

Abstract

In the present day, the significance of precision measurement and geometric accuracy has grown, and various manufacturing methods are being implemented. The "lapping" technique is one of these manufacturing methods. The Web of Science (WOS) database was searched for articles related to the lapping process in this investigation, and 602 studies were accessed. The articles were subjected to bibliometric analysis on August 15, 2025, with the keyword "lapping" and only disciplines related to mechanical engineering. The year 2023 saw the publication of the most articles (43) and the most studies (258) in manufacturing engineering. Bıfano, TG's "Ductile-Regime Grinding - A New Technology for Machining Brittle Materials" is the most influential article, with 952 citations. Nevertheless, Bıfano, TG, has only published one article. Kang Renke has the most published articles, with 14 articles and 129 citations. The "International Journal of Advanced Manufacturing Technology" published the most studies related to lapping, with 83 articles. The "International Journal of Machine Tools Manufacture" has the most citations, with 1,352. The most frequently employed terms are "surface roughness" and "lapping." The People's Republic of China is the nation that has generated the most research, with 228 articles and 2,795 citations. On the other hand, Turkey has only generated three articles. Harbin Institute of Technology has conducted the most research, with 15 articles and 354 citations. In Turkey, lapping research has been conducted at Ankara University, Çanakkale Onsekiz Mart University, Gazi University, Gaziantep University, and Hacettepe University.

Keywords

• Bibliometric analysis
• Lapping process
• Manufacturing
• Surface roughness

Lepleme İşlemi Üzerine Bilimsel Yayınların Bibliyometrik Analizi

Öz

Hassas ölçü ve geometrik tamlığın önem kazandığı günümüzde çeşitli imalat yöntemleri uygulanmaktadır. Bu imalat yöntemlerinden birisi de “lepleme” işlemidir. Bu çalışmada, Web of Science (WOS) veri tabanında taranan lepleme işlemiyle ilgili makaleleri araştırılmış ve 602 adet çalışmaya erişilmiştir. Makaleler, 15.08.2025 tarihinde “lapping” kelimesi aratılarak ve sadece makine mühendisliğini ilgilendiren alanlar dahil edilerek bibliyometrik analiz yapılmıştır. En fazla makalenin 2023 yılında 43 adet ve en fazla çalışma yayımlanan alanın ise 258 adetle imalat mühendisliği alanında yapıldığı görülmüştür. En etkin makale 952 atıfla Bıfano, TG “Ductile-Regime Grinding - A New Technology For Machining Brittle Materials” isimli çalışmasıdır. Ancak Bıfano, TG sadece 1 makale yayınlamıştır. En fazla makale üreten yazar 14 makale ve 129 atıfla Kang Renke’dir. Lepleme işlemiyle ilgili 83 adetle en fazla çalışma yayımlayan dergi “International Journal of Advanced Manufacturing Technology”, 1352 atıfla en fazla atıf alan dergiyse “International Journal of Machine Tools Manufacture” dergisidir. En fazla tercih edilen anahtar kelimeyse “lepleme (lapping)” ve yüzey pürüzlülüğü (surface roughness) kelimeleridir. En fazla çalışmayı üreten ülke 228 makale, 2795 atıfla Çin Halk Cumhuriyetidir. Türkiye ise sadece 3 makale üretmiştir. En fazla çalışmayı gerçekleştiren kurum 15 makale, 354 atıfla Harbin Teknoloji Enstitüsü’dür. Türkiye’de leplemeyle ilgili Ankara Üniversitesi, Çanakkale Onsekiz Mart Üniversitesi, Gazi Üniversitesi, Gaziantep Üniversitesi ve Hacettepe Üniversitesi çalışma yapmıştır.

Anahtar Kelimeler

• Bibliyometrik analiz
• Lepleme işlemi
• İmalat
• Yüzey pürüzlülüğü

Kaynakça

1. [1] T. Segreto and R. Teti, “Manufacturing: A Bibliometric Analysis,” CIRP Encycl. Prod. Eng., vol. 13, no. 1, pp. 1132–1136, 2019, doi: 10.4018/ijmmme.360710.
2. [2] T. C. Dzogbewu, N. Amoah, S. Afrifa Jnr, S. K. Fianko, and D. J. de Beer, “Multi-material additive manufacturing of electronics components: A bibliometric analysis,” Results Eng., vol. 19, no. May, p. 101318, 2023, doi: 10.1016/j.rineng.2023.101318.
3. [3] R. Pansare, G. Yadav, and M. R. Nagare, “Reconfigurable manufacturing system: a systematic bibliometric analysis and future research agenda,” J. Manuf. Technol. Manag., vol. 33, no. 3, pp. 543–574, 2022, doi: 10.1108/JMTM-04-2021-0137.
4. [4] Y. Chen et al., “Bibliometric Method for Manufacturing Servitization: A Review and Future Research Directions,” Sustain., vol. 14, no. 14, 2022, doi: 10.3390/su14148743.
5. [5] Z. Pei, T. Yu, W. Yi, and Y. Li, “Twenty-year retrospection on green manufacturing: A bibliometric perspective,” IET Collab. Intell. Manuf., vol. 3, no. 4, pp. 303–323, 2021, doi: 10.1049/cim2.12038.
6. [6] A. Jamwal, R. Agrawal, M. Sharma, G. S. Dangayach, and S. Gupta, “Application of optimization techniques in metal cutting operations: A bibliometric analysis,” Mater. Today Proc., vol. 38, pp. 365–370, 2020, doi: 10.1016/j.matpr.2020.07.425.
7. [7] B. Hu, W. Zhou, and K. Tsuchiya, “Mechanism elucidation of Sn-Bi alloy lapping plate surface instability,” J. Alloys Compd., vol. 965, no. July, p. 171465, 2023, doi: 10.1016/j.jallcom.2023.171465.
8. [8] J. Deng, Q. Xiong, X. Nie, Q. Yan, J. Cao, and J. Lu, “Optimisation of free-abrasive assisted lapping process with vitrified bonded diamond plates for sapphire substrates,” Precis. Eng., vol. 86, no. December 2023, pp. 183–194, 2024, doi: 10.1016/j.precisioneng.2023.12.003.

9. [9] W. Di, “Surface generating mechanism in surface shape error control for thin copper plate with large-diameter based on chemical mechanical lapping,” J. Manuf. Process., vol. 101, no. June, pp. 639–655, 2023, doi: 10.1016/j.jmapro.2023.05.082.
10. [10] J. Su, X. Zhang, M. Xue, W. Xiao, and T. Zhang, “Study on Lapping Process of 304 Stainless Steel Using Tribochemical Fixed-Abrasive Lapping Platen,” Manuf. Technol., vol. 22, no. 2, pp. 231–239, 2022, doi: 10.21062/mft.2022.022.
11. [11] B. Taghizadeh, M. V. Ehteshamfar, and H. Adibi, “Lapping optimization of additively manufactured ABS-carbon fiber composite parts using the soft computing technique,” Polym. Test., vol. 128, no. July, p. 108241, 2023, doi: 10.1016/j.polymertesting.2023.108241.
12. [12] T. Zhao et al., “Experimental study on the influence of lapping plate materials on the quality of both sides cylindrical rollers machining,” Sci. Rep., vol. 15, no. 1, pp. 1–21, 2025, doi: 10.1038/s41598-025-85260-3.
13. [13] K. Geng, C. He, S. Wang, G. Chen, and C. Ren, “The rotation stability of the tapered rollers in a novel ring-type lapping process,” Precis. Eng., vol. 88, no. May, pp. 927–942, 2024, doi: 10.1016/j.precisioneng.2024.05.013.
14. [14] J. Zhang, C. He, G. Chen, M. Luo, and C. Ren, “Theoretical and experimental investigation on double-disc straight groove lapping: tool contour and lapping trajectory,” Int. J. Adv. Manuf. Technol., vol. 134, no. 3–4, pp. 1507–1531, 2024, doi: 10.1007/s00170-024-14197-0.
15. [15] B. Y. Wei, X. Z. Deng, and Z. D. Fang, “Study on ultrasonic-assisted lapping of gears,” Int. J. Mach. Tools Manuf., vol. 47, no. 12–13, pp. 2051–2056, 2007, doi: 10.1016/j.ijmachtools.2005.11.003.
16. [16] J. Wen et al., “Lapping tooth surface micro-topography prediction for extended epicycloid hypoid gears,” Mech. Mach. Theory, vol. 206, no. September 2024, p. 105931, 2025, doi: 10.1016/j.mechmachtheory.2025.105931.
17. [17] S. Wang et al., “Lapping adjustment method for actual surface of hypoid gears,” J. Brazilian Soc. Mech. Sci. Eng., vol. 45, no. 2, pp. 1–8, 2023, doi: 10.1007/s40430-023-04027-x.
18. [18] İ. Pazarkaya, M. Yazar, S. Karabulut, G. Uzun, and A. Özdemir, “Effect of lapping process on axis misalignment and surface roughness in elliptical gear pairs,” J. Manuf. Process., vol. 115, no. February, pp. 192–201, 2024, doi: 10.1016/j.jmapro.2024.02.019.
19. [19] A. U. AYDINOĞLU, A. İLHAN, and Ö. K. ÖZER, “Bir Sosyal Bilimler Araştırma Yöntemi Olarak Bibliyometri: Akademik: Girişimcilik Örneği,” Pamukkale Univ. J. Soc. Sci. Inst., 2022, doi: 10.30794/pausbed.1124926.