THE COMPREHENSIVE OVERVIEW OF THE DESIGN, MANUFACTURING, TESTING, CHARACTERIZATION, AND APPLICATIONS OF ULTRA-HIGH TEMPERATURE FIBER COMPOSITES

Öz

Ultra-high-temperature fiber-reinforced composites (UHTCMCs) are among the leading advanced material classes used in the most demanding engineering applications, such as those in the aerospace, nuclear energy, and defense industries. This review comprehensively examines the different types of UHTCMCs, their production methods, application areas, and new development trends based on current literature. First, polymer, ceramic, metallic, and semiconductor matrix composites are evaluated, and the advantages and limitations of each system at high temperatures are demonstrated. Ceramic matrix composites based on ZrB₂–SiC and HfB₂–SiC stand out with their high melting points and oxidation resistance, while carbon and SiC fiber reinforcement has been shown to provide significant improvements in fracture toughness and thermal shock resistance. Prominent production methods include hot pressing, spark plasma sintering, polymer infiltration and pyrolysis, chemical vapor infiltration, and liquid silicone infiltration. Hybrid methods are emphasized as effective in overcoming the limitations of single techniques. An examination of application areas has revealed that UHTCMCs can be successfully used in hypersonic vehicle nose cones and leading edges, rocket engine nozzles, concentrated solar power systems, nuclear reactor components, and high-temperature tribological systems. Current trends highlight advanced manufacturing techniques, hybrid fiber reinforcements, multilayer interface coatings, and functional optimization. Literature findings indicate that UHTCMCs will play an indispensable role in future critical technologies, not only with their structural but also functional properties.

Anahtar Kelimeler

• Ultra High Temperature
• Metal
• Polymer
• Ceramic
• Fiber and Composite

Ultra Yüksek Sıcaklık Fiber Kompozitlerin Tasarım, Üretim, Test, Karakterizasyon ve Kullanım Alanlarının Kapsamlı Bir Bakış

Öz

Ultra yüksek sıcaklıklara dayanıklı fiber takviyeli kompozitler (UHTCMCs), havacılık, uzay, nükleer enerji ve savunma endüstrileri gibi en zorlu mühendislik uygulamalarında kullanılan ileri malzeme sınıflarının başında gelmektedir. Bu derleme çalışmasında, literatürde yer alan güncel araştırmalar temel alınarak, UHTCMC’lerin farklı türleri, üretim yöntemleri, uygulama alanları ve yeni gelişim trendleri kapsamlı şekilde incelenmiştir. Öncelikle polimer, seramik, metalik ve yarı iletken matrisli kompozit türleri değerlendirilmiş, her bir sistemin yüksek sıcaklık koşullarındaki avantaj ve sınırlılıkları ortaya konmuştur. Özellikle ZrB₂–SiC ve HfB₂–SiC esaslı seramik matrisli kompozitler, yüksek ergime noktaları ve oksidasyon dirençleriyle öne çıkarken; karbon ve SiC fiber takviyesi sayesinde kırılma tokluğu ve termal şok dayanımında belirgin iyileşmeler sağlandığı görülmüştür. Üretim yöntemleri arasında sıcak presleme, kıvılcım plazma sinterleme, polimer infiltrasyonu ve piroliz, kimyasal buhar infiltrasyonu ve sıvı silikon infiltrasyonu öne çıkmaktadır. Hibrit yöntemlerin, tekil tekniklerin sınırlılıklarını gidermede etkili olduğu vurgulanmıştır. Uygulama alanları incelendiğinde, UHTCMC’lerin hipersonik araçların burun konileri ve ön kenarlarında, roket motor nozullarında, konsantre güneş enerjisi sistemlerinde, nükleer reaktör bileşenlerinde ve yüksek sıcaklık tribolojik sistemlerde başarıyla kullanılabileceği ortaya konmuştur. Güncel eğilimler arasında ileri üretim teknikleri, hibrit fiber takviyeleri, çok katmanlı arayüz kaplamaları ve fonksiyonel optimizasyon öne çıkmaktadır. Literatür bulguları UHTCMC’lerin yalnızca yapısal değil, aynı zamanda fonksiyonel özellikleriyle de geleceğin kritik teknolojilerinde vazgeçilmez bir rol oynayacağını göstermektedir.

Anahtar Kelimeler

• Ultra Yüksek Sıcaklık
• Metal
• Polimer
• Seramik
• Fiber ve Kompozit

Kaynakça

1. [1] Rashid, A. B., Haque, M., Islam, S. M. M., & Uddin Labib, K. M. R. (2024). Nanotechnology-enhanced fiber-reinforced polymer composites: Recent advancements on processing techniques and applications. Heliyon, 10(2), e24692. https://doi.org/10.1016/j.heliyon.2024.e24692.
2. [2] Ni, D., Cheng, Y., Zhang, J., Liu, J.-X., Zou, J., Chen, B., Wu, H., Li, H., Dong, S., Han, J., Zhang, X., Fu, Q., & Zhang, G.-J. (2022). Advances in ultra-high temperature ceramics, composites, and coatings. Journal of Advanced Ceramics, 11(1), 1–56. https://doi.org/10.1007/s40145-021-0550-6.
3. [3] Zuo, H., Ruan, F., Wang, H., Wang, H., Wang, X., Huang, Y., Wang, R., Zou, L., Xu, Z., & Li, D. (2023). Advances in ablation or oxidation mechanisms and behaviors of carbon fiber-reinforced Si-based composites. Molecules, 28(16), 6022. https://doi.org/10.3390/molecules28166022.
4. [4] Ohji, T., & Singh, M. (Eds.). Engineered Ceramics: Current Status and Future Prospects. 2016.
5. [5] Padture, N. Havacılık ve uzay tahrikinde gelişmiş yapısal seramikler. Nature Mater 15 , 804–809 (2016). https://doi.org/10.1038/nmat4687.
6. [6] Cervellon, R., Smith, J., & Martin, L. (2020). High- and very-high-cycle fatigue behavior of Ni-based single-crystal superalloys at 1000 °C. TMS Superalloys 2020, 185–195. https://www.tms.org/superalloys/2020/Superalloys2020_185_195.pdf.
7. [7] Perepezko, J. H. (2009). The hotter the engine, the better. Science, 326(5956), 1068-1069. DOI: 10.1126/science.1179327.
8. [8] Kellner, T. (2015)Made in rocket city: GE to mass-produce advanced space age material in the US for the first time. GE Reports.

9. [9] Heidenreich, B. (2015). Ceramic Matrix Composites. https://elib.dlr.de/100221/
10. [10] Evans, A.G., Zok, F.W. The physics and mechanics of fibre-reinforced brittle matrix composites. JOURNAL OF MATERIALS SCIENCE 29, 3857–3896 (1994). https://doi.org/10.1007/BF00355946.
11. [11] Marshall, D. B., & Cox, B. N. (2008). Integral textile ceramic structures. Annu. Rev. Mater. Res., 38(1), 425-443. https://doi.org/10.1146/annurev.matsci.38.060407.130214.
12. [12] Dever, J. A., Nathal, M. V., & DiCarlo, J. A. (2013). Research on high-temperature aerospace materials at NASA Glenn Research Center. Journal of Aerospace Engineering, 26(2), 500-514. https://doi.org/10.1061/(ASCE)AS.1943-5525.000032.
13. [13] Bansal, N. P., & Lamon, J. Ceramic matrix composites: materials, modeling and technology. John Wiley & Sons. 2014
14. [14] Grady, J. E. CMC Technology Advancements for Gas Turbine Engine Applications (NASA, 2013). https://ntrs.nasa.gov/api/citations/20140000458/downloads/20140000458.pdf.
15. [15] Lo, KC., Chang, YJ., Murakami, H. et al. An oxidation resistant refractory high entropy alloy protected by CrTaO4-based oxide. Sci Rep 9, 7266 (2019). https://doi.org/10.1038/s41598-019-43819-x.
16. [16] Aguirre, T. G., Zhu, P., Zhu, J., Feng, L., Zhang, X., Zhou, Y., & Qian, M. (2022). Zirconium-diboride silicon-carbide composites: A review. Ceramics International. Advance online publication. https://doi.org/10.1016/j.ceramint.2021.12.246.
17. [17] Simonenko, E. P., Papynov, E. K., Shichalin, O. O., Belov, A. A., Nagornov, I. A., Simonenko, T. L., Gorobtsov, P. Y., Teplonogova, M. A., Mokrushin, A. S., Simonenko, N. P., & Kuznetsov, N. T. (2024). Reactive Spark Plasma Sintering and Oxidation of ZrB₂–SiC and ZrB₂–HfB₂–SiC Ceramic Materials. Ceramics, 7(4), 1566–1583. https://doi.org/10.3390/ceramics7040101.
18. [18] Park, M. S., Gu, J., Lee, H., Lee, S. H., Feng, L., & Fahrenholtz, W. G. (2023). Cf/SiC ceramic matrix composites with extraordinary thermomechanical properties up to 2000° C. Nanomaterials, 14(1), 72.
19. [19] aradimas, G., & Salonitis, K. (2023). Ceramic matrix composites for aero engine applications—a review. Applied Sciences, 13(5), 3017.
20. [20] Naslain, R.R. (2004). Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Composites Science and Technology, 64, 155-170. DOI:10.1016/S0266-3538(03)00230-6.
21. [21] Servadei, F., Zoli, L., Galizia, P., Melandri, C., & Sciti, D. (2022). Preparation of UHTCMCs by hybrid processes coupling Polymer Infiltration and Pyrolysis with Hot Pressing and vice versa. Journal of the European Ceramic Society, 42(5), 2118–2126. https://doi.org/10.1016/j.jeurceramsoc.2021.12.039.
22. [22] Zoli, L., Vinci, A., Galizia, P., Gutiérrez-Gonzalez, C. F., Rivera, S., & Sciti, D. (2020). Is spark plasma sintering suitable for the densification of continuous carbon fibre – UHTCMCs, Journal of the European Ceramic Society, 40(7), 2597–2603. https://doi.org/10.1016/j.jeurceramsoc.2019.12.004.
23. [23] Liu, R.-J., Cao, Y.-B., Yang, H.-Y., Yan, C.-L., & Long, X.-H. (2018). Effect of CVD‑SiC Interface Modification Coating on the Mechanical Properties of Cf/SiC Composite Prepared by Gaseous Silicon Infiltration Process. Journal of Materials Engineering, 46(1), 37‑43. https://doi.org/10.11868/j.issn.1001-4381.2015.001526.
24. [24] Liegaut, C., Bertrand, P., Maille, L., & Rebillat, F. (2022). UHTC-based matrix as protection for Cf/C composites: Original manufacturing, microstructural characterisation and oxidation behaviour at temperature above 2000 °C. Journal of the European Ceramic Society, 42(7), 3168–3182. https://doi.org/10.1016/j.jeurceramsoc.2022.02.029.
25. [25] Wang, X., Zhai, W., Wang, S., Shen, Z., Wang, Y., & Zhang, Q. (2020). A Novel Transposon, Tn6518, Mediated Transfer of mcr-3 Variant in ESBL-Producing Aeromonas veronii. Infection and drug resistance, 13, 893–899. https://doi.org/10.2147/IDR.S239865.
26. [26] ang, Y., Thorn, T. D. S., Liu, Y., Advani, S. G., Papageorgiou, D. G., Bilotti, E., & Zhang, H. (2025). A review on energy-efficient manufacturing for high-performance fibre-reinforced composites. Composites Part A: Applied Science and Manufacturing, 192, Article 108779. https://doi.org/10.1016/j.compositesa.2025.108779.
27. [27] Gong, Z., Xu, Z., Zhang, J., Guo, R., Han, Y., Sun, X., ... & Zheng, C. (2024). The Microstructure and Mechanical Properties of Si3N4f/BN/SiBCN Microcomposites Fabricated by the PIP Process. Materials, 17(10), 2457.
28. [28] Jin, E., Sun, W., Liu, H., Wu, K., Ma, D., Sun, X., Feng, Z., Li, J., & Yuan, Z. (2020). Effect of Interface Coating on High Temperature Mechanical Properties of SiC–SiC Composite Using Domestic Hi–Nicalon Type SiC Fibers. Coatings, 10(5), 477. https://doi.org/10.3390/coatings10050477.
29. [29] Marschall, J., Pejakovic, D. A., Fahrenholtz, W. G., Hilmas, G. E., Zhu, S., Ridge, J., ... & Thömel, J. (2009). Oxidation of ZrB2-SiC ultrahigh-temperature ceramic composites in dissociated air. Journal of Thermophysics and Heat Transfer, 23(2), 267-278.
30. [30] Li, Y., et al. (2024). Waterborne intumescent fire-retardant polymer: Mechanisms and applications. Polymer Degradation and Stability, 204, 110021. https://doi.org/10.3390/polym16162353.
31. [31] Cheng, Y., An, Y., et al. (2023). Long-term oxidation and ablation behavior of Cf/ZrB₂–SiC composites at 1500, 2000, and 2200 °C. International Journal of Applied Ceramic Technology. Advance online publication. https://doi.org/10.1111/ijac.14299.
32. [32] Zhu, T. & Wang, Z. (2024). Advances in processing and ablation properties of carbon fiber reinforced ultra-high temperature ceramic composites. REVIEWS ON ADVANCED MATERIALS SCIENCE, 63(1), 20240029. https://doi.org/10.1515/rams-2024-0029.
33. [33] Chen, B. W., et al. (2020). Long-term ablation behavior and mechanisms of 2D Cf/ZrB₂–SiC composites in plasma environments. Corrosion Science, 177, Article 108967. https://doi.org/10.1016/j.corsci.2020.108967.
34. [34] Chen, B. W., Ni, D. W., Lu, J., Cai, F. Y., Zou, X. G., Zhou, H. J., & Dong, S. M. (2021). Multi-cycle and long-term ablation behavior of Cf/ZrB₂–SiC composites at 2500 °C. Corrosion Science, 184, Article 109385. https://doi.org/10.1016/j.corsci.2021.109385.
35. [35] Bazli, M., & Abolfazli, M. (2020). Mechanical Properties of Fibre Reinforced Polymers under Elevated Temperatures: An Overview. Polymers, 12(11), 2600. https://doi.org/10.3390/polym12112600.
36. [36] Esha, & Hausmann, J. (2023). Material Characterization Required for Designing Satellites from Fiber-Reinforced Polymers. Journal of Composites Science, 7(12), 515. https://doi.org/10.3390/jcs7120515.
37. [37] Rajak, D. K., Pagar, D. D., Menezes, P. L., & Linul, E. (2019). Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications. Polymers, 11(10), 1667. https://doi.org/10.3390/polym11101667.
38. [38] Agarwal, B. D., Broutman, L. J., & Chandrashekhara, K. Analysis and performance of fiber composites (4th ed.). Wiley. 2018.
39. [39] Chung, D. D. L. Composite materials: Science and applications. Springer. 2010.
40. [40] Goyal, S. J., & Cochran, E. W. (2022). Cyanate ester composites to improve thermal performance: A review. Polymer International, 71(5), 583–589. https://doi.org/10.1002/pi.6373.
41. [41] Kim, K. S., & Hahn, H. T. (1989). Residual stress development during processing of graphite/epoxy composites. Composites Science and Technology, 36(2), 121-132. https://doi.org/10.1016/0266-3538(89)90083-3.
42. [42] Kim RY, Hahn HT. Effect of Curing Stresses on the First Ply-failure in Composite Laminates. Journal of Composite Materials. 1979;13(1):2-16. doi:10.1177/002199837901300101.
43. [43] Hamzat, A. K., Altun, F., Yeasmin, F., Unlu, N., Bahceci, E., Asmatulu, E., ... & Asmatulu, R. (2025). Impacts of Aggressive Aviation Fluids on Physical and Chemical Properties of Aerospace-Grade Fiber Composites. Polymer Degradation and Stability, 111679.
44. [44] Shi, X. H., Li, X. L., Li, Y. M., Li, Z., & Wang, D. Y. (2022). Flame-retardant strategy and mechanism of fiber reinforced polymeric composite: a review. Composites Part B: Engineering, 233, 109663. https://doi.org/10.1016/j.compositesb.2022.109663.
45. [45] Shen, J., Liang, J., Lin, X., Lin, H., Yu, J., & Wang, S. (2021). The Flame-Retardant Mechanisms and Preparation of Polymer Composites and Their Potential Application in Construction Engineering. Polymers, 14(1), 82. https://doi.org/10.3390/polym14010082.
46. [46] Alongi J, Horrocks AR, Carosio F, Malucelli G (2013) Update on flame retardant textiles: state of the art. Environmental Issues and Innovative Solutions 148–152.
47. [47] Mouritz, A. P., & Gibson, A. G. Fire properties of polymer composite materials. Springer. 2006.
48. [48] Soutis, C. (2005). Fibre reinforced composites in aircraft construction. Progress in Aerospace Sciences, 41 (2), 143–151. https://doi.org/10.1016/j.paerosci.2005.02.004.
49. [49] Ilyas, R. A., Sapuan, S. M., Asyraf, M. R. M., Dayana, D. A. Z. N., Amelia, J. J. N., Rani, M. S. A., Norrrahim, M. N. F., Nurazzi, N. M., Aisyah, H. A., Sharma, S., Ishak, M. R., Rafidah, M., & Razman, M. R. (2021). Polymer Composites Filled with Metal Derivatives: A Review of Flame Retardants. Polymers, 13(11), 1701. https://doi.org/10.3390/polym13111701.
50. [50] Hiremath, V.S., Reddy, D.M., Reddy Mutra, R., Sajeev, A., Dhilipkumar, T., & J, N. (2024). Thermal degradation and fire retardant behaviour of natural fibre reinforced polymeric composites- A Comprehensive Review. Journal of Materials Research and Technology.
51. [51] Murad, M.S., Hamzat, A.K., Asmatulu, E. et al. Flame-retardant fiber composites: synergistic effects of additives on mechanical, thermal, chemical, and structural properties. Adv Compos Hybrid Mater 8, 31 (2025). https://doi.org/10.1007/s42114-024-01111-1.
52. [52] Shi, X., Wang, M., Zhai, W., Zhu, Z., Xu, Z., Zhang, Q., ... & ud Din, A. Q. (2013). Friction and wear behavior of NiAl–10 wt% Ti3SiC2 composites. Wear, 303(1-2), 9-20. https://doi.org/10.1016/j.wear.2013.02.013.
53. [53] Boissin E, Bois C, Wahl J-C, Palin-Luc T. Effect of temperature on damage mechanisms and mechanical behaviour of an acrylic-thermoplastic-matrix and glass-fibre-reinforced composite. Journal of Composite Materials. 2020;54(27):4269-4282. doi:10.1177/0021998320929056.
54. [54] Shahari, S., Fathullah, M., Al Bakri Abdullah, M. M., Zamree Bin Abd. Rahim, Z., Mia, M., & Budi Darmawan, V. E. (2021). Recent developments in fire retardant glass fibre reinforced epoxy composite and geopolymer as a potential fire-retardant material: A review. Construction and Building Materials, 277, Article 122246. https://doi.org/10.1016/j.conbuildmat.2021.122246.
55. [55] Horrocks, A. R., & Price, D. (Eds.). Advances in Fire Retardant Materials. Woodhead Publishing. 2008.
56. [56] Camino, G., & Costa, L. (1988). Performance and mechanisms of fire retardants in polymers — A review. Polymer Degradation and Stability, 20(3–4), 271-294. https://doi.org/10.1016/0141-3910(88)90073-0.
57. [57] Laoutid, F., Bonnaud, L., Alexandre, M., Lopez-Cuesta, J.-M., & Dubois, P. (2009). New prospects in flame retardant polymer materials: From fundamentals to nanocomposites. Materials Science and Engineering: R: Reports, 63(3), 100–125. https://doi.org/10.1016/j.mser.2008.09.002.
58. [58] Jimenez, M., Duquesne, S., & Bourbigot, S. (2006). Intumescent fire protective coating: Toward a better understanding of their mechanism of action. Thermochimica Acta, 449(1–2), 16–26. https://doi.org/10.1016/j.tca.2006.07.008.
59. [59] Wang, X., Song, L., Pornwannachai, W., Hu, Y., & Li, Q. (2013). The effect of graphene presence in flame-retarded epoxy resin matrix on the mechanical and flammability properties of glass fibre-reinforced composites. Composites Part A: Applied Science and Manufacturing, 53, 88-96. https://doi.org/10.1016/j.compositesa.2013.05.017.
60. [60] Wang, X., Song, L., Yang, H., Xing, W., Kandola, B., & Hu, Y. (2012). Simultaneous reduction and surface functionalization of graphene oxide with POSS for reducing fire hazards in epoxy composites. Journal of Materials Chemistry, 22(41), 22037–22043. https://doi.org/10.1039/C2JM35479A.
61. [61] Lee, S. H., Lee, S. G., Lee, J. S., & Ma, B. C. (2022). Understanding the Flame Retardant Mechanism of Intumescent Flame Retardant on Improving the Fire Safety of Rigid Polyurethane Foam. Polymers, 14(22), 4904. https://doi.org/10.3390/polym14224904.
62. [62] Alongi, J., Han, Z., & Bourbigot, S. (2015). Intumescence: Tradition versus novelty. A comprehensive review. Progress in Polymer Science, 51, 28–73. https://doi.org/10.1016/j.progpolymsci.2015.04.010.
63. [63] Shen, J., Liang, J., Lin, X., Lin, H., Yu, J., & Wang, S. (2022). The flame-retardant mechanisms and preparation of polymer composites and their potential application in construction engineering. Polymers, 14(1), 82. https://doi.org/10.3390/polym14010082.
64. [64] Li, B., Zhang, X., Zhang, Y., & Zhang, L. (2022). Microstructure, mechanical properties and high-temperature oxidation behavior of ZrB₂–SiC composites with different SiC contents. Journal of Materials Research and Technology, 20, 2824–2833. https://doi.org/10.1016/j.jmrt.2022.08.113.
65. [65] Hull, T. R., & Kandola, B. K. Fire Retardancy of Polymeric Materials. CRC Press. 2011.
66. [66] Lewin, M. Flame Retardant Polymeric Materials. Springer. 2019.
67. [67] Gurung, D., Murad, M. S., Asmatulu, E., Gürsoy, M., Bahçeci, E., Bakir, M., & Asmatulu, R. (2024). Enhancing the thermal and mechanical properties of sulfonated peek fiber composites with reduced smoke density and toxicity. Journal of Applied Polymer Science, 141(35), e55886. https://doi.org/10.1002/app.55886.
68. [68] Wyatt, B.C., Nemani, S.K., Hilmas, G.E. et al. Ultra-high temperature ceramics for extreme environments. Nat Rev Mater 9, 773–789 (2024). https://doi.org/10.1038/s41578-023-00619-0.
69. [69] Fahrenholtz, W. G., Hilmas, G. E., Talmy, I. G., & Zaykoski, J. A. (2007). Refractory diborides of zirconium and hafnium. Journal of the American Ceramic Society, 90(5), 1347-1364. https://doi.org/10.1111/j.1551-2916.2007.01583.x.
70. [70] Chen, Y. F., Hong, C. Q., Hu, C. L., Hu, P., Li, L., Liu, J., ... & Zhu, S. Z. (2017). Ceramic-based thermal protection materials for aerospace vehicles. Advanced Ceramics, 38(5), 311-390. doi: 10.16253/j.cnki.37-1226/tq.2017.07.001.
71. [71] Gao, R., Wang, S., Zhou, T., Jiang, T., Lu, L., Wen, Q., Tao, S., & Xiong, X. (2025). Research Progress on Ultrahigh-Temperature Ceramics Modified C/C Composites. Materials, 18(16), 3891. https://doi.org/10.3390/ma18163891.
72. [72] Baier, L., Frieß, M., Hensch, N. et al. Development of ultra-high temperature ceramic matrix composites for hypersonic applications via reactive melt infiltration and mechanical testing under high temperature. CEAS Space J 17, 635–644 (2025). https://doi.org/10.1007/s12567-024-00562-y.
73. [73] Glass, D. (2011). Physical challenges and limitations confronting the use of UHTCs on hypersonic vehicles. In Proceedings of the 2011 AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit (AIAA Paper No. 2011-2304). American Institute of Aeronautics and Astronautics. https://doi.org/10.2514/6.2011-2304.
74. [74] Zoli, L., Vinci, A., Silvestroni, L., Sciti, D., Reece, M., & Grasso, S. (2017). Rapid spark plasma sintering to produce dense UHTCs reinforced with undamaged carbon fibres. Materials & Design, 130, 1–7. https://doi.org/10.1016/j.matdes.2017.05.029.
75. [75] Servadei, F., Zoli, L., Galizia, P., Melandri, C., & Sciti, D. (2022). Preparation of UHTCMCs by hybrid processes coupling polymer infiltration and pyrolysis with hot pressing and vice versa. Journal of the European Ceramic Society, 42(5), 2118–2126. https://doi.org/10.1016/j.jeurceramsoc.2021.12.039.
76. [76] Liu, Y., Zu, Y., Tian, H., Dai, J., & Sha, J. (2021). Microstructure and mechanical properties of continuous carbon fiber-reinforced ZrB₂-based composites via combined electrophoretic deposition and sintering. Journal of the European Ceramic Society, 41(8), 1779–1787. https://doi.org/10.1016/j.jeurceramsoc.2020.10.044.
77. [77] Sciti, D., Silvestroni, L., & Bellosi, A. (2006). Fabrication and properties of HfB2–MoSi2 composites produced by hot pressing and spark plasma sintering. Journal of Materials Research, 21(6), 1460-1466. https://doi.org/10.1557/jmr.2006.0180.
78. [78] Sciti, D., Silvestroni, L., Celotti, G., Melandri, C., & Guicciardi, S. (2008). Sintering and mechanical properties of ZrB2–TaSi2 and HfB2–TaSi2 ceramic composites. Journal of the American Ceramic Society, 91(10), 3285-3291. https://doi.org/10.1111/j.1551-2916.2008.02593.x.
79. [79] Galizia, P., Sciti, D., Binner, J., Venkatachalam, V., Lagos, M. A., Servadei, F., Vinci, A., Zoli, L., & Reimer, T. (2023). Elevated temperature tensile and bending strength of ultra-high temperature ceramic matrix composites obtained by different processes. Journal of the European Ceramic Society, 43(11), 4588–4601. https://doi.org/10.1016/j.jeurceramsoc.2023.03.055.
80. [80] Zoli, L., Servadei, F., Bassi, G., Rossi, A., Montesi, M., Vinci, A., Sciti, D., & Panseri, S. (2024). From outer space to inside the body: Ultra high temperature ceramic matrix composites for biomedical applications. Journal of the European Ceramic Society, 44(2), 729–737. https://doi.org/10.1016/j.jeurceramsoc.2023.10.007.
81. [81] Golla, B. R., Mukhopadhyay, A., Basu, B., & Thimmappa, S. K. (2020). Review on ultra-high temperature boride ceramics. Progress in Materials Science, 111, 100651. https://doi.org/10.1016/j.pmatsci.2020.100651.
82. [82] Arai, Y., Inoue, R., Goto, K., & Kogo, Y. (2019). Carbon fiber reinforced ultra-high temperature ceramic matrix composites: A review. Ceramics International, 45(12), 14481-14489. https://doi.org/10.1016/j.ceramint.2019.05.065.
83. [83] Peters, A. B., Zhang, D., Nagle, D. C., Spicer, J. B., & Brupbacher, M. C. (2022). Reactive two-step additive manufacturing of ultra-high temperature carbide ceramics. Additive Manufacturing, 61, 103318. https://doi.org/10.1016/j.addma.2022.103318.
84. [84] Qin, M., Gild, J., Hu, C., Wang, H., Hoque, M. S. B., Braun, J. L., Harrington, T. J., Hopkins, P. E., Vecchio, K. S., & Luo, J. (2020). Dual-phase high-entropy ultra-high temperature ceramics. Journal of the European Ceramic Society, 40(15), 5037–5050. https://doi.org/10.1016/j.jeurceramsoc.2020.05.040.
85. [85] Vinci, A., Zoli, L., Landi, E., & Sciti, D. (2017). Oxidation behaviour of a continuous carbon fibre reinforced ZrB₂–SiC composite. Corrosion Science, 123, 129–138. https://doi.org/10.1016/j.corsci.2017.04.012.
86. [86] Vinci, A., Reimer, T., Zoli, L., & Sciti, D. (2021). Influence of pressure on the oxidation resistance of carbon fiber reinforced ZrB₂/SiC composites at 2000 and 2200 °C. Corrosion Science, 184, 109377. https://doi.org/10.1016/j.corsci.2021.109377.
87. [87] Kubota, Y., Arai, Y., Yano, M., Inoue, R., Goto, K., & Kogo, Y. (2019). Oxidation and recession of plain weave carbon fiber reinforced ZrB2-SiC-ZrC in oxygen–hydrogen torch environment. Journal of the European Ceramic Society, 39(9), 2812-2823. https://doi.org/10.1016/j.jeurceramsoc.2019.03.010.
88. [88] Rueschhoff, L. M., Carney, C. M., Apostolov, Z. D., & Cinibulk, M. K. (2020). Processing of fiber‐reinforced ultra‐high temperature ceramic composites: A review. International Journal of Ceramic Engineering & Science, 2(1), 22–37. https://doi.org/10.1002/ces2.10033.
89. [89] Mor, M., Meiser, M., Langhof, N., Vinci, A., Schafföner, S., Failla, S., & Zoli, L. (2023). Tribological behavior of carbon fiber reinforced ZrB₂-based ultra-high temperature ceramics. Journal of the European Ceramic Society, 43(13), 5413–5424. https://doi.org/10.1016/j.jeurceramsoc.2023.05.019.
90. [90] Zoli, L., Vinci, A., Galizia, P., Gutiérrez-González, C. F., Rivera, S., & Sciti, D. (2022). Novel ceramic fibre–Zirconium diboride composites for high-temperature solar energy applications. Composites Part B: Engineering, 242, 110081. https://doi.org/10.1016/j.compositesb.2022.110081.
91. [91] Nykiel, K., Wyatt, B., Aeori, B., & Strachan, A. (2025). Exploration of Hexagonal, Layered Carbides and Nitrides as Ultra-High Temperature Ceramics. arXiv preprint arXiv:2508.18455. https://doi.org/10.48550/arXiv.2508.18455.
92. [92] Zancan, E. (2024, April 14–19). Polymer-derived ceramics for ultra-high temperature aerospace applications: Are they a viable option? Paper presented at Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications VI, Giardini Naxos, Messina, Sicily, Italy.
93. [93] Zoli, L., Servadei, F., Bassi, G., Rossi, A., Montesi, M., Vinci, A., Sciti, D., & Panseri, S. (2024). From outer space to inside the body: Ultra-high temperature ceramic matrix composites for biomedical applications. Journal of the European Ceramic Society, 44(2), 729–737. https://doi.org/10.1016/j.jeurceramsoc.2023.10.00.
94. [94] Clyne, T. W., & Withers, P. J. An introduction to metal matrix composites (Illustrated, revised ed.). Cambridge University Press. 1993.
95. [95] Miracle, D. B. (2005). Metal matrix composites—From science to technological significance. Composites Science and Technology, 65(15–16), 2526–2540. https://doi.org/10.1016/j.compscitech.2005.05.027.
96. [96] Bahl, S. (2021). Fiber reinforced metal matrix composites – A review. Materials Today: Proceedings, 39(1), 317–323. https://doi.org/10.1016/j.matpr.2020.07.423.
97. [97] Chawla, N., & Chawla, K. K. (2013). Metal matrix composites (2nd ed.). Springer. https://doi.org/10.1007/978-1-4614-9548-2.
98. [98] Kaczmar, J., Pietrzak, K., & Włosiński, W. (2000). The production and application of metal matrix composite materials. Journal of Materials Processing Technology, 106(1-3), 58-67. https://doi.org/10.1016/S0924-0136(00)00639-7.
99. [99] Mortensen, A., & Llorca, J. (2010). Metal matrix composites. Annual Review of Materials Research, 40, 243–270. https://doi.org/10.1146/annurev-matsci-070909-104511.
100. [100] Dulal, M., Islam, M. R., Maiti, S., Islam, M. H., Ali, I., Abdelkader, A. M., Novoselov, K. S., Afroj, S., & Karim, N. (2023). Smart and multifunctional fiber-reinforced composites of 2D heterostructure-based textiles. Advanced Functional Materials, 33(40), Article 2305901. https://doi.org/10.1002/adfm.202305901.
101. [101] Li, B., Jia, J., Gao, Y., Han, M., & Wang, W. (2017). Microstructural and tribological characterization of NiAl matrix self-lubricating composite coatings by atmospheric plasma spraying. Tribology International, 109, 563-570. https://doi.org/10.1016/j.triboint.2017.01.031.
102. [102] Fahrenholtz, W. G., & Hilmas, G. E. (2017). Ultra-high temperature ceramics: Materials for extreme environments. Scripta Materialia, 129, 94–99. https://doi.org/10.1016/j.scriptamat.2016.10.018.
103. [103] Cheng, T., Qu, Z., Li, W., and Fang, D. (2020). "Fracture Strength Behaviors of Ultra-High-Temperature Materials." ASME. J. Appl. Mech. March 2020; 87(3): 031006. https://doi.org/10.1115/1.4045046.
104. [104] Wang, S., Ma, J., Zhu, S., Cheng, J., Qiao, Z., Yang, J., & Liu, Y. (2015). High temperature tribological properties of Ti₃AlC₂ ceramic against SiC under different atmospheres. Materials & Design, 67, 188–194. https://doi.org/10.1016/j.matdes.2014.11.043.
105. [105] Pooja, K., Tarannum, N. & Chaudhary, P. Metal matrix composites: revolutionary materials for shaping the future. Discov Mater 5, 35 (2025). https://doi.org/10.1007/s43939-025-00226-6.
106. [106] Rao, C. M., & Rao, K. M. (2018). Abrasive wear behaviour of TiB₂ fabricated aluminum 6061. Materials Today: Proceedings, 5(1), 268–275. https://doi.org/10.1016/j.matpr.2017.11.082.
107. [107] Sun, Q., Zhang, H., Huang, C., & Zhang, W. (2021). Fabrication of C/C–SiC–ZrB2 Ultra-High Temperature Composites through Liquid–Solid Chemical Reaction. Crystals, 11(11), 1352. https://doi.org/10.3390/cryst11111352.
108. [108] Zhao, Z., Bai, P., Du, W., Liu, B., Pan, D., & Das, R. (2020). An overview of graphene and its derivatives reinforced metal matrix composites: Preparation, properties and applications. Carbon, 170, 302–326. https://doi.org/10.1016/j.carbon.2020.08.040.
109. [109] Miracle, D. B., & Donaldson, S. L. (Eds.). Composites (Vol. 21, ASM Handbook Series). ASM International. 2001.
110. [110] Geng, L., Huang, L. High Temperature Properties of Discontinuously Reinforced Titanium Matrix Composites: A Review. Acta Metall. Sin. (Engl. Lett.) 27, 787–797 (2014). https://doi.org/10.1007/s40195-014-0155-y.
111. [111] Sattar, M., Batool, M., & Khan, Z. S. (2019). Effect of thermal cycling on the interfacial bonding between Al₂O₃ coating and C/SiC composite. Materials Research Express, 6(10), 105402. https://doi.org/10.1088/2053-1591/ab4323.
112. [112] Zheng, K. L., Wei, X. S., Yan, B., & Yan, P. F. (2020). Ceramic waste SiC particle-reinforced Al matrix composite brake materials with a high friction coefficient. Wear, 458–459, 203424. https://doi.org/10.1016/j.wear.2020.203424.
113. [113] Sciti, D., Zoli, L., Vinci, A., Silvestroni, L., Mungiguerra, S., & Galizia, P. (2020). Effect of PAN-based and pitch-based carbon fibres on microstructure and properties of continuous Cf/ZrB₂–SiC UHTCMCs. Journal of the European Ceramic Society, 41(5), 3045–3050. https://doi.org/10.1016/j.jeurceramsoc.2020.05.032.
114. [114] Sciti, D., Galizia, P., Reimer, T., Schoberth, A., Gutiérrez-González, C., Silvestroni, L., Vinci, A., & Zoli, L. (2022). A systematic approach for horizontal and vertical scale up of sintered Ultra-High Temperature Ceramic Matrix Composites for aerospace – Advances and perspectives. Composites Part B: Engineering, 234, 109709. https://doi.org/10.1016/j.compositesb.2022.109709.
115. [115] Failla, S., Galizia, P., Zoli, L., Vinci, A., & Sciti, D. (2019). Toughening effect of non-periodic fiber distribution on crack propagation energy of UHTC composites. Journal of Alloys and Compounds, 777, 612–618. https://doi.org/10.1016/j.jallcom.2018.11.043.
116. [116] Lyu, Y., Li, A., Wu, J., & Yang, D. (2025). 3D printing of continuous carbon fibre reinforced high-temperature epoxy composites. Composites Communications, 56, Article 102397. https://doi.org/10.1016/j.coco.2025.102397.
117. [117] Lyu Y, Wu J, Zhang H, Brádaigh CMÓ, Yang D. Kesikli karbon fiber takviyeli polifenilen sülfür kompozitlerin malzeme ekstrüzyon katkılı imalatında termal işlem koşullarının kristallik ve mekanik özellikler üzerindeki etkileri. Kompozit Malzemeler Dergisi . 2023;57(24):3775-3787. doi: 10.1177/00219983231194391.
118. [118] Sciti, D., Zoli, L., Silvestroni, L., Cecere, A., Di Martino, G. D., & Savino, R. (2016). Design, fabrication and high velocity oxy-fuel torch tests of a Cf-ZrB₂-fiber nozzle to evaluate its potential in rocket motors. Materials & Design, 109, 709-717. https://doi.org/10.1016/j.matdes.2016.07.090.
119. [119] Snyder, A.D., Phillips, Z.J., Turicek, J.S. et al. Prolonged in situ self-healing in structural composites via thermo-reversible entanglement. Nat Commun 13, 6511 (2022). https://doi.org/10.1038/s41467-022-33936-z.
120. [120] Continuous C., (14.7.2025) Continuous Composites Secures Multi-Year Award to Validate High-Performance Materials. https://continuouscomposites.com/usaf-funds-cf3d-high-temp-materials/
121. [121] Rishad, S. M. A., Islam, M. A., & Mondal, D. (2025). Innovative fabrication pathways for ultra-high temperature ceramic matrix composites: Progress, properties enhancements and future perspectives. Open Ceramics, 23, 100817. https://doi.org/10.1016/j.oceram.2025.100817.
122. [122] Lynam, A., Romero, A.R., Xu, F. et al. Thermal Spraying of Ultra-High Temperature Ceramics: A Review on Processing Routes and Performance. J Therm Spray Tech 31, 745–779 (2022). https://doi.org/10.1007/s11666-022-01381-5.
123. [123] Flauder, S., Wich, F., Sha, J., Langhof, N., Krenkel, W., & Schafföner, S. (2023). Effect of thermo-mechanical and low-cycle preloading on the strength of carbon fiber-reinforced ceramic matrix composites. Journal of the European Ceramic Society, 43(13), 5474–5483. https://doi.org/10.1016/j.jeurceramsoc.2023.05.037.
124. [124] Corman, GS, Brun, MK, & Luthra, KL. "SiC Fiber Reinforced SiC-Si Matrix Composites Prepared by Melt Infiltration (MI) for Gas Turbine Engine Applications." Proceedings of the ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition. Volume 4: Manufacturing Materials and Metallurgy; Ceramics; Structures and Dynamics; Controls, Diagnostics and Instrumentation; Education; IGTI Scholar Award; General. Indianapolis, Indiana, USA. June 7–10, 1999. V004T02A004. ASME. https://doi.org/10.1115/99-GT-234.
125. [125] Clyne, T. W., & Withers, P. J. An introduction to metal matrix composites (Rev. ed., Cambridge Solid State Science Series). Cambridge University Press. 1993.
126. [126] Moskvichev, Evgeny and Shamarin, Nikolay and Savchenko, Nickolai, High Temperature Tribological Properties of Additively Manufactured Wc Reinforced Cual7-W Composites. http://dx.doi.org/10.2139/ssrn.4830249.
127. [127] Deng Y, Liu Y, Pang H, Xu R, Ke P. Improving the tribological performance of CFRPTFE at elevated temperature by sliding against Ti-TiCx/DLC film. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2024;238(5):467-482. doi:10.1177/13506501231209550.
128. [128] Yuan, L., Han, Y., Zhen, J., Jia, Z., & Zhang, R. (2024). Synergistic Enhancement of the High-Temperature Friction and Wear Behavior of PTFE Matrix Composites with the Addition of CF, PEEK, and TiC. Polymers, 16(23), 3412. https://doi.org/10.3390/polym16233412.
129. [129] Zhao, Z., Zhao, Y., et al. (2025). Outstanding high-temperature friction and wear performance of low-Co high-entropy alloy coatings with grain-boundary ligament microstructure. Surface and Coatings Technology, 514, Article 132602. https://doi.org/10.1016/j.surfcoat.2025.132602.
130. [130] De Bianchi, F., Ponnusami, S. A., Silvestroni, L., & Grande, A. M. (2021). Thermo-elastic properties in short fibre reinforced ultra-high temperature ceramic matrix composites: Characterisation and numerical assessment. Materials Today Communications, 29, 102754. https://doi.org/10.1016/j.mtcomm.2021.102754.
131. [131] Fu, Y., Xie, Y., Li, X., Zhang, J., & Wang, X. (2022). Ultra-high temperature performance of carbon fiber composite reinforced by HfC nanowires: A promising lightweight composites for aerospace engineering. Composites Part B: Engineering, 250, Article 110453. https://doi.org/10.1016/j.compositesb.2022.110453.
132. [132] Larsen, J.M., Russ, S.M. & Jones, J.W. An evaluation of fiber-reinforced titanium matrix composites for advanced high-temperature aerospace applications. Metall Mater Trans A 26, 3211–3223 (1995). https://doi.org/10.1007/BF02669450.
133. [133] Ray, S., & Cooney, R. P. (2018). Thermal degradation of polymer and polymer composites. In M. Kutz (Ed.), Handbook of environmental degradation of materials (3rd ed., pp. 185–206). William Andrew Publishing. https://doi.org/10.1016/B978-0-323-52472-8.00009-5.