A Systematic Review of Energy Absorption in Functionally Graded Lattice Structures

Öz

In industries such as aerospace, automotive, and biomedical engineering, there is a growing demand for lightweight materials with high energy absorption performance. Functionally graded lattice structures (FGLSs) manufactured through additive manufacturing technologies have emerged as an innovative solution to meet this need. The functional grading concept, which involves the gradual variation of material properties within the structure—such as density, topology, and cell size—enables effective tailoring of the mechanical response and optimization of energy absorption behavior. This study provides a systematic review of recent experimental and numerical research focused on the energy absorption capacity of FGLSs. The paper examines fundamental design strategies, unit cell topologies, types of gradients, manufacturing methods and materials, quantifiable performance metrics, and the potential industrial applications of these structures. In addition, current technological challenges and future research directions are discussed, offering a comprehensive roadmap for researchers in this field.

Anahtar Kelimeler

• Functionally Graded Structures
• Energy Absorption
• Additive Manufacturing
• Lattice Structures

Etik Beyan

The author of this article declares that the materials and methods they use in their work do not require ethical committee approval and/or legal-specific permission.

Fonksiyonel Gradyanlı Kafes Yapılarda Enerji Sönümleme Kapasitesi için Sistematik İnceleme

Öz

Havacılık, otomotiv ve biyomedikal gibi endüstrilerde, hafif ve yüksek performanslı enerji sönümleyici malzemelere duyulan talep giderek artmaktadır. Katmanlı imalat teknolojileri ile üretilen fonksiyonel gradyanlı kafes yapılar (FGKY) bu ihtiyaca yenilikçi bir çözüm olarak öne çıkmaktadır. Malzeme özelliklerinin (yoğunluk, topoloji, hücre boyutu vb.) yapı içinde kademeli olarak değiştirilmesine dayanan fonksiyonel gradyan konsepti, mekanik tepkinin ve enerji sönümlenmesinin optimize edilmesine olanak tanır. Bu çalışma, FGKY'lerin enerji sönümleme kapasitesi üzerine yapılmış güncel deneysel ve sayısal çalışmaları sistematik olarak incelemektedir. Makale, temel tasarım stratejilerini, birim hücre topolojilerini, gradyan türlerini, üretim yöntemlerini ve malzemeleri, ölçülebilir performans metriklerini ve bu yapıların endüstriyel uygulama potansiyellerini ele almaktadır. Ayrıca, mevcut teknolojik zorluklar ve gelecekteki araştırma yönelimleri de değerlendirilerek alandaki araştırmacılar için kapsamlı bir yol haritası sunulmaktadır.

Anahtar Kelimeler

• Fonksiyonel Gradyanlı Yapılar
• Enerji Sönümleme
• Katmanlı İmalat
• Kafes Yapılar

Etik Beyan

Bu makalenin yazarı çalışmalarında kullandıkları materyal ve yöntemlerin etik kurul izni ve/veya yasal-özel bir izin gerektirmediğini beyan ederler.

Kaynakça

1. KAYNAKLAR (REFERENCES) [1] Sunay, N., & Turgut, E. T. (2024). Eklemeli imalat teknolojilerinin havacılık sektöründe enerji verimliliğini artırma ve emisyon azaltma potansiyeli. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 12(2), 548-566. https://doi.org/10.29109/gujsc.1437824
2. [2] Nian, Y., Wan, S., Zhou, P., Wang, X., Santiago, R., & Li, M. (2021). Energy absorption characteristics of functionally graded polymer-based lattice structures filled aluminum tubes under transverse impact loading. Materials & Design, 209, 110011. https://doi.org/10.1016/j.matdes.2021.110011
3. [3] Kaya, N. N., & Eldem, C. (2024). Özgün bir latis yapı tasarımının auxetic davranışının incelenmesi. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 12(2), 771-781. https://doi.org/10.29109/gujsc.1486707
4. [4] Zhu, G., Xu, F., Wang, X., Zhang, X., & Li, J. (2025). Mechanical performance of graded lattice structures with periodic density variations fabricated by selective laser melting. Materials & Design, 254, 114100. https://doi.org/10.1016/j.matdes.2025.114100
5. [5] Avcı, M., & Keleş, Ö. (2025). Kaplamalı kafes yapıların enerji sönümleme incelemesi. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 13(4), 1843-1862. https://doi.org/10.29109/gujsc.1735561
6. [6] Wikipedia. Crystal structure, 2021. http://en.wikipedia.org/wiki/Crystal_ structure
7. [7] Science Photo Library. Bone tissue: Animated coloured scanning electron micrograph (SEM) of cancellous (spongy) bone, dissolve.com, 2021. https:// dissolve.com/video/Bone-tissue-Animated-coloured-scanning-electron-micrograph-rights-managed-stock-video-footage/002-D30-33-213
8. [8] Steve Gschmeissner. Nasturtium stem: Coloured scanning electron micrograph (SEM) of a freeze-fractured Nasturtium, Science Photo Library, 2021. https:// www.sciencephot-o.com/media/ 203278/view

9. [9] Richard Schiffman. How neglecting bees could endanger humans, salon.com, 2013. https://www.salon.com/2013/05/01/follow_europes_lead_in_protecting_ bees
10. [10] Daynes, S., & Feih, S. (2025). Functionally graded lattice structures with tailored stiffness and energy absorption. International Journal of Mechanical Sciences, 285, 109861. https://doi.org/10.1016/j.ijmecsci.2024.109861
11. [11] Wallach, J. C., & Gibson, L. J. (2001). Mechanical behavior of a three-dimensional truss material. International Journal of Solids and Structures, 38(40-41), 7181-7196. https://doi.org/10.1016/S0020-7683(00)00400-5
12. [12] Li, S., Zhao, S., Hou, W., Teng, C., Hao, Y., Li, Y., Yang, R., & Misra, R. D. K. (2016). Functionally graded Ti-6Al-4V meshes with high strength and energy absorption. Advanced Engineering Materials, 18(1), 34–38. https://doi.org/10.1002/adem.201500086
13. [13] Ullah, I., Brandt, M., & Feih, S. (2016). Failure and energy absorption characteristics of advanced 3D truss core structures. Materials & Design, 92, 937-948. https://doi.org/10.1016/j.matdes.2015.12.058
14. [14] Choy, S. Y., Sun, C.-N., Leong, K. F., & Wei, J. (2017). Compressive properties of functionally graded lattice structures manufactured by selective laser melting. Materials & Design, 131, 112-120
15. [15] Habib, F. N., Iovenitti, P., Masood, S. H., & Nikzad, M. (2018). Fabrication of polymeric lattice structures for optimum energy absorption using multi jet fusion technology. Materials & Design, 155, 86–98. https://doi.org/10.1016/j.matdes.2018.05.059
16. [16] Bai, L., Gong, C., Chen, X., Sun, Y., Xin, L., Pu, H., Peng, Y., & Luo, J. (2020). Mechanical properties and energy absorption capabilities of functionally graded lattice structures: Experiments and simulations. International Journal of Mechanical Sciences, 182, 105735. https://doi.org/10.1016/j.ijmecsci.2020.105735
17. [17] Hailu, Y. M., Nazir, A., Lin, S.-C., & Jeng, J.-Y. (2021). The Effect of functional gradient material distribution and patterning on torsional properties of lattice structures manufactured using multiJet fusion technology. Materials, 14(21), 6521. https://doi.org/10.3390/ma14216521
18. [18] Rodrigo, C., Xu, S., Durandet, Y., Fraser, D., & Ruan, D. (2021). Crushing behavior of functionally graded lattice. JOM, 73, 4130–4140. https://doi.org/10.1007/s11837-021-04946-x
19. [19] Wang, M., Zhang, J., & Wang, W. (2022). Compression and deformation behaviors of hierarchical circular-cell lattice structure with enhanced mechanical properties and energy absorption capacity. aerospace, 9(12), 786. https://doi.org/10.3390/aerospace9120786
20. [20] Gao, F., Zeng, Q., Wang, J., Liu, Z., & Liang, J. (2022). Compressive properties and energy absorption of BCC lattice structures with bio-inspired gradient design. Acta Mechanica Sinica, 38, 421345. https://doi.org/10.1007/s10409-021-09013-3
21. [21] K. Ushijima, W. J. Cantwell, R. Mines, S. Tsopanos, and M. Smith, An investigation into the compressive properties of stainless steel micro-lattice structures, Jnl Sandwich Struct. Mater. 13, 303 (2011). https://doi.org/10.1177/1099636210380997
22. [22] Li, P., Ma, Y. E., Sun, W., Qian, X., Zhang, W., & Wang, Z. (2022). Mechanical behaviors and failure modes of additive manufactured Ti6Al4V lattice structures under compressive load. Thin-Walled Structures, 180, 109778. https://doi.org/10.1016/j.tws.2022.109778
23. [23] Coluccia, A., Jiang, G., Meyer, G., De Pasquale, G., & Mittelstedt, C. (2023). Nonlinear static and dynamic modeling of energy absorption lattice structures behavior. Mechanics of Advanced Materials and Structures, 30(14), 2838-2849. https://doi.org/10.1080/15376494.2022.2064016
24. [24] Rodrigo, C., Xu, S., Durandet, Y., Tran, P., & Ruan, D. (2023). Mechanical response of functionally graded lattices with different density grading strategies. Thin-Walled Structures, 192, 111132. https://doi.org/10.1016/j.tws.2023.111132
25. [25] Noronha, J., Dash, J., Leary, M., Watson, M., Qian, M., Kyriakou, E., & Brandt, M. (2023). Additively manufactured functionally graded lattices: Design, mechanical response, deformation behavior, applications, and insights. JOM, 75(12), 5729–5754. https://doi.org/10.1007/s11837-023-06190-x
26. [26] Lin, Y., Shi, W., Sun, X., Liu, S., Li, J., Zhou, Y., & Han, Y. (2023). Influence of density gradient on the compression of functionally graded BCC lattice structure. Materials, 16(2), 520. https://doi.org/10.3390/ma16020520
27. [27] Zhang, Q., Li, B., Zhou, S., Luo, M., Han, F., Chai, C., Wang, J., & Yang, X. (2024). Superior energy absorption characteristics of additively-manufactured hollow-walled lattices. International Journal of Mechanical Sciences, 264, 108834. https://doi.org/10.1016/j.ijmecsci.2023.108834
28. [28] Ling, C., Cernicchi, A., Gilchrist, M. D., & Cardiff, P. (2019). Mechanical behaviour of additively-manufactured polymeric octet-truss lattice structures under quasi-static and dynamic compressive loading. Materials & Design, 162, 106–118. https://doi.org/10.1016/j.matdes.2018.11.035
29. [29] Mueller, J., Matlack, K. H., Shea, K., & Daraio, C. (2019). Energy absorption properties of periodic and stochastic 3D lattice materials. Advanced Theory https://doi.org/ 10.1002/adts.201900081
30. [30] Pizzorni, M., Lertora, E., & Mandolfino, C. (2023). Energy absorption properties of a 3D-printed lattice-core foam composite under compressive and low-velocity impact loading. Materials Today Communications, 36, 106918. https://doi.org/10.1016/j.mtcomm.2023.106918
31. [31] Yin, H., Zhang, W., Zhu, L., Meng, F., Liu, J., & Wen, G. (2023). Review on lattice structures for energy absorption properties. Composite Structures, 304, 116397. https://doi.org/10.1016/j.compstruct.2022.116397
32. [32] Rodrigo, C., Xu, S., Durandet, Y., Fraser, D., & Ruan, D. (2023). Quasi-static and dynamic compression of additively manufactured functionally graded lattices: Experiments and simulations. Engineering Structures, 284, 115909. https://doi.org/10.1016/j.engstruct.2023.115909
33. [33] Chen, D., Gao, K., Yang, J., & Zhang, L. (2023). Functionally graded porous structures: Analyses, performances, and applications-A Review. Thin-Walled Structures, 191, 111046. https://doi.org/10.1016/j.tws.2023.111046
34. [34] Iacolino, G., Catalanotti, G., Mantegna, G., González, E. V., & Alaimo, A. (2025). A preliminary experimental evaluation of energy absorption capabilities of BCC and WBCC lattice structures manufactured via 3D Printing. Materials, 18, 4574. https://doi.org/10.3390/ma18194574
35. [35] Zhang, J., Lu, G., & You, Z. (2020). Large deformation and energy absorption of additively manufactured auxetic materials and structures: A review. Composites Part B: Engineering, 201, 108340. https://doi.org/10.1016/j.compositesb.2020.108340
36. [36] Al Hassanieh, S., Alhantoobi, A., Khan, K. A., & Khan, M. A. (2021). Mechanical properties and energy absorption characteristics of additively manufactured lightweight novel re-entrant plate-based lattice structures. Polymers, 13(22), 3882. https://doi.org/10.3390/polym13223882
37. [37] Choudhry, N. K., Panda, B., & Kumar, S. (2022). In-plane energy absorption characteristics of a modified re-entrant auxetic structure fabricated via 3D printing. Composites Part B: Engineering, 228, 109437. https://doi.org/10.1016/j.compositesb.2021.109437
38. [38] Top, N., Şahin, İ., & Gökçe, H. (2023). The Mechanical properties of functionally graded lattice structures derived using computer-aided design for additive manufacturing. Applied Sciences, 13(21), 11667. https://doi.org/10.3390/app132111667
39. [39] Seyedkazemi, M., Wenqi, H., Jing, G., Ahmadi, P., & Khajehdezfuly, A. (2024). Auxetic structures with viscoelastic behavior: A review of mechanisms, simulation, and future perspectives. Structures, 70, 107610. https://doi.org/10.1016/j.istruc.2024.107610
40. [40] Zhang, H., Hu, D., Peng, H., Yuan, W., & Yang, Z. (2024). In-plane crushing behavior and energy absorption of sponge-inspired lattice structures. International Journal of Mechanical Sciences, 274, 109328. https://doi.org/10.1016/j.ijmecsci.2024.109328
41. [41] Desole, M. P., Gisario, A., & Barletta, M. (2024). Energy absorption of PLA-based metamaterials manufactured by material extrusion: dynamic loads and shape recovery. The International Journal of Advanced Manufacturing Technology, 132, 1697-1722. https://doi.org/10.1007/s00170-024-13430-0
42. [42] Kladovasilakis, N., Charalampous, P., Tsongas, K., Kostavelis, I., Tzetzis, D., & Tzovaras, D. (2021). Experimental and computational investigation of lattice sandwich structures constructed by additive manufacturing technologies. Journal of Manufacturing and Materials Processing, 5(3), 95. https://doi.org/10.3390/jmmp5030095
43. [43] Cetin, E., & Baykasoğlu, C. (2019). Energy absorption of thin-walled tubes enhanced by lattice structures. International Journal of Mechanical Sciences, 157-158, 471-484. https://doi.org/10.1016/j.ijmecsci.2019.04.049
44. [44] Tolochyna, O., Zgalat-Lozynska, N., Podrezov, Y., Verbylo, D., Tolochyn, O., & Zgalat-Lozynskyy, O. (2023). The role of flexible polymer composite materials properties in energy absorption of three-dimensional auxetic lattice structures. Materials Today Communications, 37, 107370. https://doi.org/10.1016/j.mtcomm.2023.107370
45. [45] Al-Areqi, A. M., Aloyaydi, B., Subbarayan, S., & Al-Mufadi, F. A. (2024). Impact behavior of PLA/Epoxy/MGFs composite structure. Materials Today Communications, 39, 109264. https://doi.org/10.1016/j.mtcomm.2024.109264 [46] Novak, N., Al-Ketan, O., Mauko, A., Krstulović-Opara, L., Tanaka, S., Borovinšek, M., Vihar, B., Maver, U., Hokamoto, K., Vesenjak, M., & Ren, Z. (2025). Quasi-static and impact behaviour of polymer-metal
46. [47] Gao, X., Zhang, B., Wang, W., & He, R. (2026). Dynamic mechanical response of ceramic plate lattice and its interpenetrating phase composites: A comparative study based on polyurea and aluminum alloy soft phases. Journal of Alloys and Compounds, 1051, 186033. https://doi.org/10.1016/j.jallcom.2026.186033
47. [48] Mehraj, H., Singh, A., Peroni, M., & Karathanasopoulos, N. (2025). 3D-hybrid architected materials and interpenetrating phase composites: Design and mechanics. Thin-Walled Structures, 217, 113855. https://doi.org/10.1016/j.tws.2025.113855
48. [49] Wang, X., Song, B., Zhu, H., Zhang, Z., Zhang, L., & Shi, Y. (2025). Additively manufactured plate lattice interpenetrating composites with high yield strength and energy absorbing capability. Composite Structures, 353, 118709. https://doi.org/10.1016/j.compstruct.2024.118709
49. [50] Albertini, F., Dirrenberger, J., Sollogoub, C., Molotnikov, A., Adrien, J., & Maire, E. (2025). Hybrid auxetics: Postponing failure with elastomer infiltration of Ti-6Al-4V lattices. International Journal of Mechanical Sciences, 306, 110704. https://doi.org/10.1016/j.ijmecsci.2025.110704
50. [51] Zhang, X., Meng, Q., Zhang, K., Zhu, R., Qu, Z., Li, Y., & He, R. (2023). 3D-printed bioinspired Al2O3/polyurea dual-phase architecture with high robustness, energy absorption, and cyclic life. Chemical Engineering Journal, 463, 142378. https://doi.org/10.1016/j.cej.2023.142378