Görüntü Sunumu
BibTex RIS Kaynak Göster
Yıl 2022, Cilt: 6 Sayı: 3, 511 - 520, 31.12.2022
https://doi.org/10.46519/ij3dptdi.1187111

Öz

Kaynakça

  • 1. Ляпков, А. А., “Полимерные аддитивные технологии: учеб. пособие” [Polymer additive technologies: textbook. allowance] [Book in Russian], Pages 1–114, Изд-во Томск. политехн. ун-та., Томск, 2016.
  • 2. Formlabs, “High Performance 3D Printers”, https://formlabs.com, October 8, 2022.
  • 3. 3D Printer company, “Магазин 3D принтер”, [3d Printer Shop] [article in Russian], https://3dprinter.ua, October 8, 2022.
  • 4. 3DMANUFACTURE, “Фабрика 3D печати”, [3d Print Factory] [article in Russian], https://3dmanufacture.com.ua, October 8, 2022.
  • 5. 3D TODAY, “Обзор высокотемпературных FDM-пластиков для промышленной 3D-печати”, [An Overview of High Temperature FDM Plastics for Industrial 3D Printing] [article in Russian], https://3dtoday.ru/blogs/top3dshop/overview-of-high-temperature-fdm-plastics-for-industrial-3d-printing, October 8, 2022.
  • 6. Palanisamy Chandramohan, Raghu, R., Dhanraj Pradeesh, “Additive manufacturing: a review on mechanical properties of polyjet and FDM printed parts”, Polymer Bulletin, Vol. 79, Pages 1–52, 2022.
  • 7. Pascu, N. E., Arion, A. F., Dobrescu, T., Carutasu, N. L. “Fused deposition modeling design rules for plastics”, Mat. Plast, Vol. 52, Page 141, 2015.
  • 8. Nizam, M., Ismail, K., Yap, T., “The Effect of Printing Orientation on the Mechanical Properties of FDM 3D Printed Parts" In Enabling Industry 4.0 through Advances in Manufacturing and Materials, Springer, Pages 75–85, 2022.
  • 9. Birosz, M. T., Ledenyák, D., Andó, M., “Effect of FDM infill patterns on mechanical properties”, Polymer Testing, Vol. 113, Pages 1–6, 2022.
  • 10. Hanemann, T., Syperek, D., Nötzel, D., “3D printing of ABS barium ferrite composites”, Materials, Vol. 13, Issue 6, Pages 1–13, 2020.
  • 11. Rodríguez-González, P., Zapico, P., Robles, P., Soto, A., Barreiro, J., “Evaluation of mechanical properties of FDM components reinforced with fibre”, IOP Conference Series: Materials Science and Engineering, Vol. 1193 012069, Gijόn, 2021.
  • 12. Gajdoš I., Slota J., “Influence of Printing Conditions on Structure in FDM Prototypes”, Tehnicki Vjesnik, Vol. 20, Issue 2, Pages 231–236, 2013.
  • 13. Savvakis K., Petousis M., Vairis A., Vidakis N., Bikmeyev A.T., “Еxperimental determination of the tensile strength of fused deposition modeling parts”, Conference: American Society of Mechanical Engineers-International Mechanical Engineering Congress & Exposition, Vol. 14, Pages 1–6, Montreal, 2014.
  • 14. Fang, X., Wen, J., Cheng, L., Yu, D., Zhang, H., Gumbsch, P., “Programmable gear-based mechanical metamaterials”, Nature Materials, Vol. 21, Issue 8, Pages 1–8, 2022.
  • 15. Naveen, Mr, Shrinivas, B., Umesh D., "Three-Dimensional Printing of Synthesized Eight Link Gear Variable Topology Mechanism with Fused Deposition Modeling Technique", Journal of scholastic Engineering Science and Management, Vol. 1, Issue 4, Pages 1–15, 2021.
  • 16. Apparao, D., Raju, M. J., "Design and analysis of spur gear manufactured by DMLS process", Materials Today

OPTIMIZATION OF MACHINE PARTS MODELS FOR 3D PRINTING

Yıl 2022, Cilt: 6 Sayı: 3, 511 - 520, 31.12.2022
https://doi.org/10.46519/ij3dptdi.1187111

Öz

When manufacturing machine parts using additive 3D technologies, we are faced with the task of choosing a specific manufacturing technology, material, and settings for 3D printing. These factors affect the manufacturing time, cost, accuracy, strength and other performance criteria of machine parts. The purpose of the study is thus to develop recommendations for optimizing models of machine parts for 3D printing. The study describes the main approaches to optimizing three-dimensional models of machine parts at the design stage. This optimization allows to avoid a number of problems that arise when using various 3D technologies: FDM (fused deposition modeling), SLA (laser stereolithography), etc. Depending on the type of the designed part and the applied additive 3D technology, additional requirements and restrictions are imposed on the models. The issues of optimizing models in terms of 3D printing time, manufacturing cost, geometry (accuracy) of the resulting model are considered, and the issues of the strength of the entire part or its individual elements are also partially investigated. Specific design solutions and recommendations for manufacturing rotation parts, in particular, shafts and gears, are given. The issues of occurrence of some defects associated with overheating, uneven cooling and plastic shrinkage are considered. The simplest models for studying strength of critical parts are described. Recommendations for determining the properties of machine parts manufactured using additive 3D technologies are developed. This study will be of interest primarily to the developers of 3D models and is aimed at eliminating some of the problems that arise during 3D printing at the product design stage.

Kaynakça

  • 1. Ляпков, А. А., “Полимерные аддитивные технологии: учеб. пособие” [Polymer additive technologies: textbook. allowance] [Book in Russian], Pages 1–114, Изд-во Томск. политехн. ун-та., Томск, 2016.
  • 2. Formlabs, “High Performance 3D Printers”, https://formlabs.com, October 8, 2022.
  • 3. 3D Printer company, “Магазин 3D принтер”, [3d Printer Shop] [article in Russian], https://3dprinter.ua, October 8, 2022.
  • 4. 3DMANUFACTURE, “Фабрика 3D печати”, [3d Print Factory] [article in Russian], https://3dmanufacture.com.ua, October 8, 2022.
  • 5. 3D TODAY, “Обзор высокотемпературных FDM-пластиков для промышленной 3D-печати”, [An Overview of High Temperature FDM Plastics for Industrial 3D Printing] [article in Russian], https://3dtoday.ru/blogs/top3dshop/overview-of-high-temperature-fdm-plastics-for-industrial-3d-printing, October 8, 2022.
  • 6. Palanisamy Chandramohan, Raghu, R., Dhanraj Pradeesh, “Additive manufacturing: a review on mechanical properties of polyjet and FDM printed parts”, Polymer Bulletin, Vol. 79, Pages 1–52, 2022.
  • 7. Pascu, N. E., Arion, A. F., Dobrescu, T., Carutasu, N. L. “Fused deposition modeling design rules for plastics”, Mat. Plast, Vol. 52, Page 141, 2015.
  • 8. Nizam, M., Ismail, K., Yap, T., “The Effect of Printing Orientation on the Mechanical Properties of FDM 3D Printed Parts" In Enabling Industry 4.0 through Advances in Manufacturing and Materials, Springer, Pages 75–85, 2022.
  • 9. Birosz, M. T., Ledenyák, D., Andó, M., “Effect of FDM infill patterns on mechanical properties”, Polymer Testing, Vol. 113, Pages 1–6, 2022.
  • 10. Hanemann, T., Syperek, D., Nötzel, D., “3D printing of ABS barium ferrite composites”, Materials, Vol. 13, Issue 6, Pages 1–13, 2020.
  • 11. Rodríguez-González, P., Zapico, P., Robles, P., Soto, A., Barreiro, J., “Evaluation of mechanical properties of FDM components reinforced with fibre”, IOP Conference Series: Materials Science and Engineering, Vol. 1193 012069, Gijόn, 2021.
  • 12. Gajdoš I., Slota J., “Influence of Printing Conditions on Structure in FDM Prototypes”, Tehnicki Vjesnik, Vol. 20, Issue 2, Pages 231–236, 2013.
  • 13. Savvakis K., Petousis M., Vairis A., Vidakis N., Bikmeyev A.T., “Еxperimental determination of the tensile strength of fused deposition modeling parts”, Conference: American Society of Mechanical Engineers-International Mechanical Engineering Congress & Exposition, Vol. 14, Pages 1–6, Montreal, 2014.
  • 14. Fang, X., Wen, J., Cheng, L., Yu, D., Zhang, H., Gumbsch, P., “Programmable gear-based mechanical metamaterials”, Nature Materials, Vol. 21, Issue 8, Pages 1–8, 2022.
  • 15. Naveen, Mr, Shrinivas, B., Umesh D., "Three-Dimensional Printing of Synthesized Eight Link Gear Variable Topology Mechanism with Fused Deposition Modeling Technique", Journal of scholastic Engineering Science and Management, Vol. 1, Issue 4, Pages 1–15, 2021.
  • 16. Apparao, D., Raju, M. J., "Design and analysis of spur gear manufactured by DMLS process", Materials Today
Toplam 16 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Araştırma Makalesi
Yazarlar

Alexey Voropay 0000-0003-3396-8803

Pavlo Yehorov Bu kişi benim 0000-0001-6616-9966

Grygoriy Gnatenko Bu kişi benim 0000-0002-5450-375X

Serhii Povalıaıev Bu kişi benim 0000-0001-9027-0132

Andrey Sharapata Bu kişi benim 0000-0003-0823-9262

Erken Görünüm Tarihi 14 Ekim 2022
Yayımlanma Tarihi 31 Aralık 2022
Gönderilme Tarihi 11 Ekim 2022
Yayımlandığı Sayı Yıl 2022 Cilt: 6 Sayı: 3

Kaynak Göster

APA Voropay, A., Yehorov, P., Gnatenko, G., Povalıaıev, S., vd. (2022). OPTIMIZATION OF MACHINE PARTS MODELS FOR 3D PRINTING. International Journal of 3D Printing Technologies and Digital Industry, 6(3), 511-520. https://doi.org/10.46519/ij3dptdi.1187111
AMA Voropay A, Yehorov P, Gnatenko G, Povalıaıev S, Sharapata A. OPTIMIZATION OF MACHINE PARTS MODELS FOR 3D PRINTING. IJ3DPTDI. Aralık 2022;6(3):511-520. doi:10.46519/ij3dptdi.1187111
Chicago Voropay, Alexey, Pavlo Yehorov, Grygoriy Gnatenko, Serhii Povalıaıev, ve Andrey Sharapata. “OPTIMIZATION OF MACHINE PARTS MODELS FOR 3D PRINTING”. International Journal of 3D Printing Technologies and Digital Industry 6, sy. 3 (Aralık 2022): 511-20. https://doi.org/10.46519/ij3dptdi.1187111.
EndNote Voropay A, Yehorov P, Gnatenko G, Povalıaıev S, Sharapata A (01 Aralık 2022) OPTIMIZATION OF MACHINE PARTS MODELS FOR 3D PRINTING. International Journal of 3D Printing Technologies and Digital Industry 6 3 511–520.
IEEE A. Voropay, P. Yehorov, G. Gnatenko, S. Povalıaıev, ve A. Sharapata, “OPTIMIZATION OF MACHINE PARTS MODELS FOR 3D PRINTING”, IJ3DPTDI, c. 6, sy. 3, ss. 511–520, 2022, doi: 10.46519/ij3dptdi.1187111.
ISNAD Voropay, Alexey vd. “OPTIMIZATION OF MACHINE PARTS MODELS FOR 3D PRINTING”. International Journal of 3D Printing Technologies and Digital Industry 6/3 (Aralık 2022), 511-520. https://doi.org/10.46519/ij3dptdi.1187111.
JAMA Voropay A, Yehorov P, Gnatenko G, Povalıaıev S, Sharapata A. OPTIMIZATION OF MACHINE PARTS MODELS FOR 3D PRINTING. IJ3DPTDI. 2022;6:511–520.
MLA Voropay, Alexey vd. “OPTIMIZATION OF MACHINE PARTS MODELS FOR 3D PRINTING”. International Journal of 3D Printing Technologies and Digital Industry, c. 6, sy. 3, 2022, ss. 511-20, doi:10.46519/ij3dptdi.1187111.
Vancouver Voropay A, Yehorov P, Gnatenko G, Povalıaıev S, Sharapata A. OPTIMIZATION OF MACHINE PARTS MODELS FOR 3D PRINTING. IJ3DPTDI. 2022;6(3):511-20.

 download

Uluslararası 3B Yazıcı Teknolojileri ve Dijital Endüstri Dergisi Creative Commons Atıf-GayriTicari 4.0 Uluslararası Lisansı ile lisanslanmıştır.