Development of Thermoelectrıc Egg Incubator Integrated wıth Thermal Energy Storage System

Öz

Egg incubation plays an important role in the poultry production system especially during the day-old chick development. In Nigeria, poultry production is a lucrative business but lack of commercially owned hatchery machines hinders the expansion and make poultry products for instance day old chicks costly more especially in the northern part of Nigeria. In this paper, the egg incubation system was designed with two (2) operating modes of heat sources namely: a thermoelectric module used for daytime operation and a thermal storage system containing phase change materials (PCM) which supplied heat to the system for nighttime operation. The solar PV arrays were designed to be the primary energy source for generating of electricity, which was supplied to heat sources for providing fertile eggs with five (5) egg trays that contains 60 eggs each per hatching process. The result revealed that temperature inside incubation chamber and relative humidity (RH) were controlled under optimum environmental conditions for hatching 36-39°C and 56-80% respectively to stimulate embryonic growth. As a result, the system achieved and maintained an optimum incubating temperature in the range of 36-39oC and the relative humidity (RH) of 60-80% over the incubating period of 21 days.

Anahtar Kelimeler

• Eggs
• Hatching
• Incubator
• Relative Humidity
• Temperature

Kaynakça

1. [1] Kingori, A. M. (2011). Review of the factors that influence egg fertility and hatchability in poultry, International Journal of Poultry Science, 10, 483-492.
2. [2] Nakage, E. S.; Cardozo, J. P.; Pereira, G. T.; Queiroz, S. A. and Boleli, I. C. (2003). Effect of temperature on incubation period, embryonic mortality, hatch rate, egg water loss and partridge chick weight, Rev. Bras. Cienc. Avic., 5, 131-135.
3. [3] Hubbard Co. (2011). Incubation guide. Retrieved from www.hubbardbreeders.com
4. [4] Lourens, A.; Van den Brand, H.; Meijerhof, R. and Kemp, B. (2005). Effect of eggshell temperature during incubation on embryo development, hatchability, and post hatch development, Poultry Science, 84, 914-920.
5. [5] Lourens, A.; Van den Brand, H.; Heetkamp, M. J. W.; Meijerhof R. and Kemp, B. (2007). Effects of eggshell temperature and oxygen concentration on embryo growth and metabolism during incubation, Poultry Science, 86, 2194-2199.
6. [6] Ramli, M. B.; Lim, H. P.; Wahab, M. S. and Zin, M. F. M. (2015). Egg hatching incubator using conveyor rotation system, Procedia Manufact., 2, 527-531.
7. [7] Mansaray, K. G. and Yansaneh, O. (2015). Fabrication and performance evaluation of a solar powered chicken egg incubator, Int. J. Emerg. Technol. Adv. Eng., 5, 31-36.
8. [8] Alam, H. and Ramakrishna, S. (2013). A review on the enhancement of figure of merit from bulk to nano-thermoelectric materials, Nano Energy, 2, 190-212.

9. [9] Minnich, A. J.; Dresselhaus, M. S.; Ren, Z. F. and Chen, G. (2009). Bulk nanostructured thermoelectric materials: Current research and future prospects, Energy Environ. Sci., 2, 466-479.
10. [10] Zhang, X. and Zhao, L.-D. (20015). Thermoelectric materials: Energy conversion between heat and electricity, Journal of Materiomics, 1, 92-105.
11. [11] Singhadet, E.; Suriwong, T.; Jiajitsawat, S. and Tanarak, P. (2014). Performance comparison of heating coil and thermoelectric egg incubators, Burapha Science Journal, Special Vol. 2014, 271-276.
12. [12] Savatdipap, P. (2003). Development of a thermoelectric egg incubator, Master Thesis, King Mongkut's University of Technology Thonburi, Thailand.
13. [13] Sharma, A.; Chen, C. R.; Murty, V. V. S. and Shukla, A. (2009). Solar cooker with latent heat storage systems: A review, Renewable and Sustainable Energy Review, 13, 1599-1605.
14. [14] Hasnain, S. M. (1998). Review on sustainable thermal energy storage technologies, Part I: Heat storage materials and techniques, Energy Conversion Management, 39, 1127-1138.
15. [15] Tian, Y. and Zhao, C. Y. (2013). A review of solar collectors and thermal energy storage in solar thermal applications, Applied Energy, 104, 538-553.
16. [16] Sharma, A.; Tyagi, V. V.; Chen, C. R. and Buddhi, D. (2009). Review on thermal energy storage with phase change materials and applications, Renewable and Sustainable Energy Review, 13, 318-345.
17. [17] Bolaji B.O. (2008). Design and Performance Evaluation of a Solar Poultry Egg Incubator, Thammasat International Journal of Science and Technology, 13, 1.
18. [18] Ahmad, G. E. (2002). Photovoltaic–powered Rural Zone Family House in Egypt. Renewable Energy, 26, 379-390.
19. [19] Ishaq M., et al., (2013). Design of an Off Grid Photovoltaic System: A Case Study of Government Technical College, Wudil, Kano State. International Journal of Scientific and Technology Research, 2, 12. 175-181.
20. [20] Clean Energy Council (CEC) (2009). “Grid Connected PV Systems Design Guidelines for Accredited Designers” Issue 3 July 2007, Update November 2009.
21. [21] Sandia (1995). Stand-Alone Photovoltaic Systems: A Handbook of Recommended Design Practices, Sandia National Laboratories Albuquerque New Mexico.
22. [22] Assad A. (2010). A Stand-Alone Photovoltaic System, Case Study: A Residence in Gaza, Journal of Applied Sciences in Environmental Sanitation, 5, 81-91.