In this study, highly selective and efficient adsorbent, isonitrosoacetophenone anthranoylhydrazone
modified silica gel, was prepared and applied for separation and preconcentration of Cu2+ ion in water samples.
Cu2+ ion and other metal ions were determined by Inductively Coupled Plazma Optical Emission Spectrometry.
The influences of analytical parameters including pH, amount of adsorbent, sample volume, eluent volume, type
of eluent etc. on the quantitative recovery of Cu2+ were investigated. The effects of some alkaline, alkaline earth,
some metal ions and anions on the recoveries of Cu2+ were also examined. Optimum pH value for the adsorption
of Cu2+ was pH 5. 2 mL of 0.5 M H2SO4 solution for Cu2+ was found to be satisfactory for the quantitative elution.
Limit of detection and limit of quantitation was calculated as 0.265 μg L-1 and 0.803 μg L-1 for Cu2+ respectively.
It was observed that adsorption behaviour of Cu2+ ions was fitted to the Langmiur adsorption isotherm better than
the Freundlich isotherm. In order to validate the accuracy of the method for determination of Cu2+ ion, certified
reference material (ground water-BCR 610) was used. The determined values were in good agreement with the
certified values. Proposed separation and preconcentration method was applied to spring, tap and sea water samples.
The recoveries of Cu2+ added to water samples were in between 82-93%.
Cu(II) immobilization schiff base silica gel preconcentration
Birincil Dil | Türkçe |
---|---|
Konular | Mühendislik |
Bölüm | Kimya / Chemistry |
Yazarlar | |
Yayımlanma Tarihi | 31 Aralık 2017 |
Gönderilme Tarihi | 5 Haziran 2017 |
Kabul Tarihi | 3 Ağustos 2017 |
Yayımlandığı Sayı | Yıl 2017 Cilt: 7 Sayı: 4 |