Araştırma Makalesi
BibTex RIS Kaynak Göster

A Bibliometric Research in Web of Science Database: Articles on Occupational Safety

Yıl 2024, Cilt: 8 Sayı: 1, 290 - 306, 18.07.2024
https://doi.org/10.56554/jtom.1244801

Öz

Occupational health and safety attracts the attention of many researchers from different fields of study due to its interdisciplinary nature. Elimination of physical, chemical, biological, ergonomic, psychosocial and similar hazards in the work area is possible with occupational health and safety activities. In this research, the bibliometric features of the articles written in the field of occupational safety, which are included in the SCI, SSCI and A&HCI citation indexes in the Web of Science database, were examined. As a result of the analysis, a data set of 8,271 articles in the field of occupational safety was created and the data were presented in the form of tables and figures. VOSviewer software was used to analyze and visualize the relationships between keywords, commonly cited journals, authors, and sources. The most used keyword is the word "job security", which gives the field its name. It has been observed that a total of 24,410 authors contributed to this field and 1,909 journals were the source of the articles. It was determined that the country with the highest number of publications was “USA”, the author with the highest contribution was “Arcury”, the journal with the highest number of articles was “Safety Science” and the most effective institution was “Center for Disease Control Prevention”. In this study, the network maps, keywords, publications and related issues of the studies in the field of occupational safety were examined with the current literature

Kaynakça

  • Al, U. ve Tonta, Y. (2004). Atıf analizi: Hacettepe Üniversitesi Kütüphanecilik Bölümü tezlerinde atıf yapılan kaynaklar.Bilgi Dünyası, 5(1), 19-47.doi: https://doi.org/10.15612/BD.2004.497
  • Ali, F., Park, E. & Chae, B. (2019). 30 years of contemporary hospitality management: Uncovering the bibliometrics and topical trends. International Journal of Contemporary Hospitality Management, 31(7), 2641- 2665. doi: https://doi.org/10.1108/IJCHM-10-2018-0832
  • Archambault, É., Campbell, D., Gingras, Y. & Larivière, V. (2009). Comparing bibliometric statistics obtained from the Web of Science and Scopus. Journal of the American Society for Information Science and Technology, 60(7),1320-1326. doi: https://doi.org/10.1002/asi.21062
  • Aria, M. & Cuccurullo, C. (2017). Bibliometrix: An R-tool for comprehensive science mapping analysis.Journal of Informetrics. 11(4), 959-975. doi: https://doi.org/10.1016/j.joi.2017.08.007
  • Banks, C. (2019). Health, safety, well-being and economic security implications of gig work: An interdisciplinary perspective. 11 Mayıs 2023. https://www.ilo.org/safework/events/safeday/33thinkpieces/WCMS_674004/langzn/index.htm%20adresinden%2 0al%C4%B1nd%C4%B1
  • Barling, J., Loughlin, C.& Kelloway, E. K. (2002). Development and test of a model linking safety-specific transformational leadership and occupational safety. Journal of Applied Psychology, 87(3), 488-496. doi: https://doi.org/10.1037/0021-9010.87.3.488
  • Birch, M. E. & Cary, R. A. (1996). Elemental carbon-based method for monitoring occupational exposures to particulate diesel exhaust. Aerosol Science And Technology, 25(3), 221-241. doi: https://doi.org/10.1080/02786829608965393
  • Boustras, G.& Waring, A. (2020). Towards a reconceptualization of safety and security, their interactions, and policy requirements in a 21st century context. Safety Science, 132(104942), 1-14. doi: https://doi.org/10.1016/j.ssci.2020.104942
  • Carayon, P., Hancock, P., Leveson, N., Noy, I., Sznelwar, L.& Hootegem, G. (2015). Advancing a sociotechnical systems approach to workplace safety – developing the conceptual framework.Ergonomics.58(4), 548-564. doi: https://doi.org/10.1080/00140139.2015.1015623
  • Chen, H., Hou, C., Zhang, L. & Li, S. (2020). Comparative study on the strands of research on the governance model of international occupational safety and healthissues. Safety Science,122, 1-14.doi: https://doi.org/10.1016/j.ssci.2019.104513
  • Choudhry, R. M.& Dongping, F. (2008). Why operatives engage in unsafe work behavior: Investigating factors on construction sites. Safety Science,46(4), 566-584. doi: https://doi.org/10.1016/j.ssci.2007.06.027
  • Christian, M. S., Bradley, J. C., Wallace, C. J. & Burke, M. j. (2009). Workplace safety: A meta analysis of the roles of person and situation factors. Journal Of Applied Psychology, 94(5), 1103-1127. doi: https://doi.org/10.1037/a0016172 ClarivateWeb of Science Core Collection (2022). Erişim adresi: https://clarivate.com/webofsciencegroup/solutions/web-of-science-core-collection/(Erişim tarihi: 01.10.2022)
  • Çoşkun, H. E. ve Tabak, A. (2017). Örgütsel davranış çalıştığımızda aslında ne çalışıyoruz? Türkiye’de yapılan lisansüstü tezler üzerinden bir değerlendirme. İş ve İnsan Dergisi,4(2). 101-111. doi: https://doi.org/10.18394/iid.297985
  • Das, A., & Saha, T. (2014). Authorship trends and collaborative research in the library and information science: a bibliometric study of" Desidoc Journal of Library & Information Technology" during 2005-2014. South Asian Journal of Multidisciplinary Studies (SAJMS), 2(2). 1-10. Retrieved from: http://sajms.iurc.edu.pk/index.php
  • Donthu, N., Kumar, S., Mukherjee, D., Pandey, N.& Lim, W. M. (2021). How to conduct a bibliometric analysis: An overview and guidelines. Journal of Business Research, 133, 285-296. doi: https://doi.org/10.1016/j.jbusres.2021.04.070
  • Ellegaard, O. (2018). The application of bibliometric analysis: disciplinary and user aspects. Scientometrics, 116, 181-202. doi: https://doi.org/10.1007/s11192-018-2765-z
  • Falagas, M. E., Pitsouni, E. I., Malietzis, G. A. & Pappas, G. (2008). Comparison of PubMed, Scopus, Web of Science, and Google Scholar: strengths and weaknesses. The Faseb Journal, 22(2), 338-342. doi: https://doi.org/10.1096/fj.07-9492LSF
  • International Labour Organization (ILO) OSH Management Sysytem: A tool for continual. (2011). Retrieved from: https://www.ilo.org/global/topics/safety-and-health-at-work/events-training/events-meetings/world-daysafety-health-at-work/lang--en/index.htm
  • ILO (2019), Çalışma yaşamının geleceğinin merkezinde sağlık ve güvenlik: 100 Yıllık deneyimden hareketle. https://www.ilo.org/wcmsp5/groups/public/---europe/---ro-geneva/---iloankara/ documents/publication/wcms_693766.pdf
  • Karasözen, B., Bayram, Ö. G. ve Zan, B. U. (2009). 1997-2006 Türkiye Bilim Göstergeleri Analizi. Türk Kütüphaneciliği, 23(1), 4-21. Erişim adresi: https://dergipark.org.tr/tr/pub/tk/issue/48855/622444
  • Kılkış, İ. (2018). İş Sağlığı ve Güvenliği . Dora Basım Yayın Dağıtım.
  • Kim, J., Kang, S. & Lee, K. H. (2021). Evolution of digital marketing communication: Bibliometric analysis and network visualization from key articles. Journal of Business Research, 130, 552-563. doi: https://doi.org/10.1016/j.jbusres.2019.09.043
  • Kiran, S. (2021). Occupational health could be the new normal challenge in the trade and health cycle: Keywords analysis between 1990 and 2020. Safety and Health at Work, 12(2), 272-276. doi: https://doi.org/10.1016/j.shaw.2020.11.003
  • Kyle , S. & Larivière, V. (2022). Who games metrics and rankings? Institutional niches and journal impact factor inflation. Research Policy, 51(10), 1-15. doi: https://doi.org/10.1016/j.respol.2022.104608
  • Li, J. & Hale, A. (2015). Identification of, and knowledge communication among core safety science journals. Safety Science, 74, 70-78. doi: https://doi.org/10.1016/j.ssci.2014.12.003.
  • Li, J. & Hale, A. (2016). Output distributions and topic maps of safety related journals. Safety Science, 82, 236- 244. doi: https://doi.org/10.1016/j.ssci.2015.09.004
  • Ma, J. (2022). Lightweight deep learning models for resource constrained devices. Computational Intelligence and Neuroscience, , 2022, 1-8. doi: https://doi.org/10.1155/2022/4293102
  • Maseda, A., Iturralde, T., Cooper, S. & Aparicio, G. (2022). Mapping women's involvement in family firms: A review based on bibliographic coupling analysis. 24(2), 279-305. doi: https://doi.org/10.1111/ijmr.12278
  • Massimo, A. & Cuccurullo, C. (2017). Bibliometrix: An R-tool for comprehensive science mapping analysis. Journal of Informetrics, 11(4), 959-975. doi: https://doi.org/10.1016/j.joi.2017.08.007
  • Merig, J. & Yang, J.-B. (2017). Accounting research: A Bibliometric analysis. Australian Accounting Review, 27(1), 71-100.doi: https://doi.org/10.1111/auar.12109.
  • Merigó, J. M., Miranda, J., Modak, N. M., Boustras, G. & de la Sotta, C. (2019). Forty years of Safety Science: A bibliometric overview. Safety Science, 115, 66-88. doi: https://doi.org/10.1016/j.ssci.2019.01.029.
  • Mohamed, S. (2002). Safety Climate in construction site environments. Journal of Construction Engineering and Management , 128(5), 375-384. doi: https://doi.org/10.1061/(ASCE)0733-9364(2002)128:5(375)
  • Nahrgang, J. D., Morgeson, F. P. & Hofmann, D. A. (2011). Safety at work: A meta-analytic investigation of the link between job demands, job resources, burnout, engagement, and safety outcomes. Journal of Applied Psychology, 96(1), 71-94. doi: https://doi.org/10.1037/a0021484
  • Naveen , D., Satish , K., Mukherjee, D., Pandey, N. & Lim, W. M. (2021). How to conduct a bibliometric analysis: An overview and guidelines. Journal of Business Research, 133, 285-296. doi: https://doi.org/10.1016/j.jbusres.2021.04.070
  • Neal, A.& Griffin, M. A. (2006). A study of the lagged relationships among safety climate, safety motivation, safety behavior, and accidents at the individual and group levels. Journal of Applied Psychology, 91(4),946-953. doi: https://doi.org/10.1037/0021-9010.91.4.946
  • Newaz, M. T., Ershadi, M., Jefferies, M., Pillay, M.& Davis, P. (2022). A systematic review of contemporary safety management research: a multi-level approach to identifying trending domains in the construction industry. Construction Management and Economics, 41(2), 97-115. doi:https://doi.org/10.1080/01446193.2022.2124527
  • Palaz, S. (2019). Sosyal Bilimlerde İş Sağlığı ve Güvenliği Uygulamaları. Nobel Akademik Yayıncılık Eğitim ve Danışmanlık.
  • Pesta , B., Fuerst, J.& Kirkegaard, E. O. (2018). Bibliometric keyword analysis across seventeen years (2000– 2016) of intelligence articles. Journal of Intelligence, 6(4), 1-12. doi: https://doi.org/10.3390/jintelligence6040046
  • Subramony, M., Golubovskaya, M., Keating, B., Solnet, D., Field, J. & Witheriff, M. (2022). The influence of pandemic-related workplace safety practices on frontline service employee wellbeing outcomes. Journal of Business Research, 149, 363-374. doi: https://doi.org/10.1016/j.jbusres.2022.05.040
  • Sümer, H. H. (2018). İş Sağlığı ve Güvenliği Hukuku. Ankara: Seçkin Yayıncılık.
  • Tamdoğan, O. G. (2009). Bilgi üretiminde yazın ürünleri ve kütüphaneler: Atıfların tespiti ve analizi yoluyla araştırma. Türk Kütüphaneciliği, 23(2), 254-277. Erişim adresi: https://dergipark.org.tr/tr/pub/tk/issue/48929/624162
  • Tonta, Y. (2017). Türkiye’de yayımlanan ve Web of Science’ta dizinlenen dergilerle ilgili bir değerlendirme. Türk Kütüphaneciliği, 31(4), 449-482. Erişim adresi: https://dergipark.org.tr/en/pub/tk/issue/48646/618435 TÜBİTAK Cahit Arf Bilgi Merkezi (2023). Erişim adresi:https://cabim.ulakbim.gov.tr/bibliyometrikanaliz/ bibliyometrik-analiz-sikca-sorulan-sorular/ Van Nunen, K., Li, J., Reniers, G. & Ponnet, K. (2018). Bibliometric analysis of safety culture research. Safety Science, 108, 248-258. doi: https://doi.org/10.1016/j.ssci.2017.08.011
  • Vijayakumarve, R.& Choi, J. H. (2022). Emerging trends of ergonomic risk assessment in construction safety management: A scientometric visualization analysis. International Journal of Environmental Research and Public Health, 19(23), 1-16. doi: https://doi.org/10.3390/ijerph192316120
  • VOSviewer. VOSviewer: Visiualizing Scientific Landscape (2022)Retrieved from: https://www.vosviewer.com/features/highlights
  • Wani, S. A., Akhter, M. & Musthtaq, R. (2021). Bibliometric analysis of google scholar indexed top journals in socialsciences. Journal Of Indian Library Association, 57(3), 41-52. Retrieved from: https://ilaindia.net/jila/index.php/jila/article/view/674
  • Yalçın, S., Yavuz, H. Ç. ve Dibek, M. İ. (2015). En yüksek etki faktörüne sahip eğitim dergilerindeki makalelerin içerik analizi. Eğitim ve Bilim, 40(182), 1-28. doi: https://doi.org/10.15390/EB.2015.4868
  • Yıldız, A. N., & Şahan , C. (2020). İş sağlığı ve güvenliği temel kavramlar. İçinde A. N. Yıldız, & A. Sandal, İş Sağlığı ve Güvenliği Meslek Hastalıkları (s. 27). Hacettepe Üniversitesi Yayınları.
  • Zeng, L. & Li, R. M. (2022). Construction safety and health hazard awareness in Web of Science and Weibo between 1991 and 2021. Safety Science, 152, 1-14. doi: https://doi.org/10.1016/j.ssci.2022.105790
  • Zohar, D. (1980). Safety climate in industrial organization: Theoretical and applied implications. Journal of Applied Psychology, 65(1), 96-102. doi: https://doi.org/10.1037/0021-9010.65.1.96
Yıl 2024, Cilt: 8 Sayı: 1, 290 - 306, 18.07.2024
https://doi.org/10.56554/jtom.1244801

Öz

Kaynakça

  • Al, U. ve Tonta, Y. (2004). Atıf analizi: Hacettepe Üniversitesi Kütüphanecilik Bölümü tezlerinde atıf yapılan kaynaklar.Bilgi Dünyası, 5(1), 19-47.doi: https://doi.org/10.15612/BD.2004.497
  • Ali, F., Park, E. & Chae, B. (2019). 30 years of contemporary hospitality management: Uncovering the bibliometrics and topical trends. International Journal of Contemporary Hospitality Management, 31(7), 2641- 2665. doi: https://doi.org/10.1108/IJCHM-10-2018-0832
  • Archambault, É., Campbell, D., Gingras, Y. & Larivière, V. (2009). Comparing bibliometric statistics obtained from the Web of Science and Scopus. Journal of the American Society for Information Science and Technology, 60(7),1320-1326. doi: https://doi.org/10.1002/asi.21062
  • Aria, M. & Cuccurullo, C. (2017). Bibliometrix: An R-tool for comprehensive science mapping analysis.Journal of Informetrics. 11(4), 959-975. doi: https://doi.org/10.1016/j.joi.2017.08.007
  • Banks, C. (2019). Health, safety, well-being and economic security implications of gig work: An interdisciplinary perspective. 11 Mayıs 2023. https://www.ilo.org/safework/events/safeday/33thinkpieces/WCMS_674004/langzn/index.htm%20adresinden%2 0al%C4%B1nd%C4%B1
  • Barling, J., Loughlin, C.& Kelloway, E. K. (2002). Development and test of a model linking safety-specific transformational leadership and occupational safety. Journal of Applied Psychology, 87(3), 488-496. doi: https://doi.org/10.1037/0021-9010.87.3.488
  • Birch, M. E. & Cary, R. A. (1996). Elemental carbon-based method for monitoring occupational exposures to particulate diesel exhaust. Aerosol Science And Technology, 25(3), 221-241. doi: https://doi.org/10.1080/02786829608965393
  • Boustras, G.& Waring, A. (2020). Towards a reconceptualization of safety and security, their interactions, and policy requirements in a 21st century context. Safety Science, 132(104942), 1-14. doi: https://doi.org/10.1016/j.ssci.2020.104942
  • Carayon, P., Hancock, P., Leveson, N., Noy, I., Sznelwar, L.& Hootegem, G. (2015). Advancing a sociotechnical systems approach to workplace safety – developing the conceptual framework.Ergonomics.58(4), 548-564. doi: https://doi.org/10.1080/00140139.2015.1015623
  • Chen, H., Hou, C., Zhang, L. & Li, S. (2020). Comparative study on the strands of research on the governance model of international occupational safety and healthissues. Safety Science,122, 1-14.doi: https://doi.org/10.1016/j.ssci.2019.104513
  • Choudhry, R. M.& Dongping, F. (2008). Why operatives engage in unsafe work behavior: Investigating factors on construction sites. Safety Science,46(4), 566-584. doi: https://doi.org/10.1016/j.ssci.2007.06.027
  • Christian, M. S., Bradley, J. C., Wallace, C. J. & Burke, M. j. (2009). Workplace safety: A meta analysis of the roles of person and situation factors. Journal Of Applied Psychology, 94(5), 1103-1127. doi: https://doi.org/10.1037/a0016172 ClarivateWeb of Science Core Collection (2022). Erişim adresi: https://clarivate.com/webofsciencegroup/solutions/web-of-science-core-collection/(Erişim tarihi: 01.10.2022)
  • Çoşkun, H. E. ve Tabak, A. (2017). Örgütsel davranış çalıştığımızda aslında ne çalışıyoruz? Türkiye’de yapılan lisansüstü tezler üzerinden bir değerlendirme. İş ve İnsan Dergisi,4(2). 101-111. doi: https://doi.org/10.18394/iid.297985
  • Das, A., & Saha, T. (2014). Authorship trends and collaborative research in the library and information science: a bibliometric study of" Desidoc Journal of Library & Information Technology" during 2005-2014. South Asian Journal of Multidisciplinary Studies (SAJMS), 2(2). 1-10. Retrieved from: http://sajms.iurc.edu.pk/index.php
  • Donthu, N., Kumar, S., Mukherjee, D., Pandey, N.& Lim, W. M. (2021). How to conduct a bibliometric analysis: An overview and guidelines. Journal of Business Research, 133, 285-296. doi: https://doi.org/10.1016/j.jbusres.2021.04.070
  • Ellegaard, O. (2018). The application of bibliometric analysis: disciplinary and user aspects. Scientometrics, 116, 181-202. doi: https://doi.org/10.1007/s11192-018-2765-z
  • Falagas, M. E., Pitsouni, E. I., Malietzis, G. A. & Pappas, G. (2008). Comparison of PubMed, Scopus, Web of Science, and Google Scholar: strengths and weaknesses. The Faseb Journal, 22(2), 338-342. doi: https://doi.org/10.1096/fj.07-9492LSF
  • International Labour Organization (ILO) OSH Management Sysytem: A tool for continual. (2011). Retrieved from: https://www.ilo.org/global/topics/safety-and-health-at-work/events-training/events-meetings/world-daysafety-health-at-work/lang--en/index.htm
  • ILO (2019), Çalışma yaşamının geleceğinin merkezinde sağlık ve güvenlik: 100 Yıllık deneyimden hareketle. https://www.ilo.org/wcmsp5/groups/public/---europe/---ro-geneva/---iloankara/ documents/publication/wcms_693766.pdf
  • Karasözen, B., Bayram, Ö. G. ve Zan, B. U. (2009). 1997-2006 Türkiye Bilim Göstergeleri Analizi. Türk Kütüphaneciliği, 23(1), 4-21. Erişim adresi: https://dergipark.org.tr/tr/pub/tk/issue/48855/622444
  • Kılkış, İ. (2018). İş Sağlığı ve Güvenliği . Dora Basım Yayın Dağıtım.
  • Kim, J., Kang, S. & Lee, K. H. (2021). Evolution of digital marketing communication: Bibliometric analysis and network visualization from key articles. Journal of Business Research, 130, 552-563. doi: https://doi.org/10.1016/j.jbusres.2019.09.043
  • Kiran, S. (2021). Occupational health could be the new normal challenge in the trade and health cycle: Keywords analysis between 1990 and 2020. Safety and Health at Work, 12(2), 272-276. doi: https://doi.org/10.1016/j.shaw.2020.11.003
  • Kyle , S. & Larivière, V. (2022). Who games metrics and rankings? Institutional niches and journal impact factor inflation. Research Policy, 51(10), 1-15. doi: https://doi.org/10.1016/j.respol.2022.104608
  • Li, J. & Hale, A. (2015). Identification of, and knowledge communication among core safety science journals. Safety Science, 74, 70-78. doi: https://doi.org/10.1016/j.ssci.2014.12.003.
  • Li, J. & Hale, A. (2016). Output distributions and topic maps of safety related journals. Safety Science, 82, 236- 244. doi: https://doi.org/10.1016/j.ssci.2015.09.004
  • Ma, J. (2022). Lightweight deep learning models for resource constrained devices. Computational Intelligence and Neuroscience, , 2022, 1-8. doi: https://doi.org/10.1155/2022/4293102
  • Maseda, A., Iturralde, T., Cooper, S. & Aparicio, G. (2022). Mapping women's involvement in family firms: A review based on bibliographic coupling analysis. 24(2), 279-305. doi: https://doi.org/10.1111/ijmr.12278
  • Massimo, A. & Cuccurullo, C. (2017). Bibliometrix: An R-tool for comprehensive science mapping analysis. Journal of Informetrics, 11(4), 959-975. doi: https://doi.org/10.1016/j.joi.2017.08.007
  • Merig, J. & Yang, J.-B. (2017). Accounting research: A Bibliometric analysis. Australian Accounting Review, 27(1), 71-100.doi: https://doi.org/10.1111/auar.12109.
  • Merigó, J. M., Miranda, J., Modak, N. M., Boustras, G. & de la Sotta, C. (2019). Forty years of Safety Science: A bibliometric overview. Safety Science, 115, 66-88. doi: https://doi.org/10.1016/j.ssci.2019.01.029.
  • Mohamed, S. (2002). Safety Climate in construction site environments. Journal of Construction Engineering and Management , 128(5), 375-384. doi: https://doi.org/10.1061/(ASCE)0733-9364(2002)128:5(375)
  • Nahrgang, J. D., Morgeson, F. P. & Hofmann, D. A. (2011). Safety at work: A meta-analytic investigation of the link between job demands, job resources, burnout, engagement, and safety outcomes. Journal of Applied Psychology, 96(1), 71-94. doi: https://doi.org/10.1037/a0021484
  • Naveen , D., Satish , K., Mukherjee, D., Pandey, N. & Lim, W. M. (2021). How to conduct a bibliometric analysis: An overview and guidelines. Journal of Business Research, 133, 285-296. doi: https://doi.org/10.1016/j.jbusres.2021.04.070
  • Neal, A.& Griffin, M. A. (2006). A study of the lagged relationships among safety climate, safety motivation, safety behavior, and accidents at the individual and group levels. Journal of Applied Psychology, 91(4),946-953. doi: https://doi.org/10.1037/0021-9010.91.4.946
  • Newaz, M. T., Ershadi, M., Jefferies, M., Pillay, M.& Davis, P. (2022). A systematic review of contemporary safety management research: a multi-level approach to identifying trending domains in the construction industry. Construction Management and Economics, 41(2), 97-115. doi:https://doi.org/10.1080/01446193.2022.2124527
  • Palaz, S. (2019). Sosyal Bilimlerde İş Sağlığı ve Güvenliği Uygulamaları. Nobel Akademik Yayıncılık Eğitim ve Danışmanlık.
  • Pesta , B., Fuerst, J.& Kirkegaard, E. O. (2018). Bibliometric keyword analysis across seventeen years (2000– 2016) of intelligence articles. Journal of Intelligence, 6(4), 1-12. doi: https://doi.org/10.3390/jintelligence6040046
  • Subramony, M., Golubovskaya, M., Keating, B., Solnet, D., Field, J. & Witheriff, M. (2022). The influence of pandemic-related workplace safety practices on frontline service employee wellbeing outcomes. Journal of Business Research, 149, 363-374. doi: https://doi.org/10.1016/j.jbusres.2022.05.040
  • Sümer, H. H. (2018). İş Sağlığı ve Güvenliği Hukuku. Ankara: Seçkin Yayıncılık.
  • Tamdoğan, O. G. (2009). Bilgi üretiminde yazın ürünleri ve kütüphaneler: Atıfların tespiti ve analizi yoluyla araştırma. Türk Kütüphaneciliği, 23(2), 254-277. Erişim adresi: https://dergipark.org.tr/tr/pub/tk/issue/48929/624162
  • Tonta, Y. (2017). Türkiye’de yayımlanan ve Web of Science’ta dizinlenen dergilerle ilgili bir değerlendirme. Türk Kütüphaneciliği, 31(4), 449-482. Erişim adresi: https://dergipark.org.tr/en/pub/tk/issue/48646/618435 TÜBİTAK Cahit Arf Bilgi Merkezi (2023). Erişim adresi:https://cabim.ulakbim.gov.tr/bibliyometrikanaliz/ bibliyometrik-analiz-sikca-sorulan-sorular/ Van Nunen, K., Li, J., Reniers, G. & Ponnet, K. (2018). Bibliometric analysis of safety culture research. Safety Science, 108, 248-258. doi: https://doi.org/10.1016/j.ssci.2017.08.011
  • Vijayakumarve, R.& Choi, J. H. (2022). Emerging trends of ergonomic risk assessment in construction safety management: A scientometric visualization analysis. International Journal of Environmental Research and Public Health, 19(23), 1-16. doi: https://doi.org/10.3390/ijerph192316120
  • VOSviewer. VOSviewer: Visiualizing Scientific Landscape (2022)Retrieved from: https://www.vosviewer.com/features/highlights
  • Wani, S. A., Akhter, M. & Musthtaq, R. (2021). Bibliometric analysis of google scholar indexed top journals in socialsciences. Journal Of Indian Library Association, 57(3), 41-52. Retrieved from: https://ilaindia.net/jila/index.php/jila/article/view/674
  • Yalçın, S., Yavuz, H. Ç. ve Dibek, M. İ. (2015). En yüksek etki faktörüne sahip eğitim dergilerindeki makalelerin içerik analizi. Eğitim ve Bilim, 40(182), 1-28. doi: https://doi.org/10.15390/EB.2015.4868
  • Yıldız, A. N., & Şahan , C. (2020). İş sağlığı ve güvenliği temel kavramlar. İçinde A. N. Yıldız, & A. Sandal, İş Sağlığı ve Güvenliği Meslek Hastalıkları (s. 27). Hacettepe Üniversitesi Yayınları.
  • Zeng, L. & Li, R. M. (2022). Construction safety and health hazard awareness in Web of Science and Weibo between 1991 and 2021. Safety Science, 152, 1-14. doi: https://doi.org/10.1016/j.ssci.2022.105790
  • Zohar, D. (1980). Safety climate in industrial organization: Theoretical and applied implications. Journal of Applied Psychology, 65(1), 96-102. doi: https://doi.org/10.1037/0021-9010.65.1.96

Web of Science Veri Tabanında Bibliyometrik Bir Araştırma: İş Güvenliği Makaleleri

Yıl 2024, Cilt: 8 Sayı: 1, 290 - 306, 18.07.2024
https://doi.org/10.56554/jtom.1244801

Öz

İş sağlığı ve güvenliği, disiplinler arası doğası nedeniyle farklı çalışma alanlarından pek çok araştırmacının ilgisini çekmektedir. Çalışma alanında bulunan fiziksel, kimyasal, biyolojik, ergonomik, psikososyal ve benzeri tehlikelerin ortadan kaldırılması iş sağlığı ve güvenliği faaliyetleri ile mümkün olmaktadır. Bu araştırmada, Web of Science veri tabanında SCI, SSCI ve A&HCI atıf indeksleri içerisinde yer alan, iş güvenliği alanında yazılmış makalelerinin bibliyometrik özellikleri incelenmiştir. Analiz sonucunda iş güvenliği alanında 8.271 makale veri seti oluşturulmuş olup veriler tablolar ve şekiller biçiminde sunulmuştur. Anahtar kelimeler, ortak atıf yapılan dergiler, yazarlar ve kaynaklar arasındaki ilişkileri analiz etmek ve görselleştirmek için VOSviewer yazılımı kullanılmıştır. En fazla kullanılan anahtar kelime, alana ismini veren “iş güvenliği” kelimesidir. Bu alana toplam 24.410 yazarın katkı sağladığı ve makalelere 1.909 derginin kaynaklık yaptığı görülmüştür. En fazla yayın yapan ülkenin “ABD”, en fazla katkı yapan yazarın “Arcury”, en fazla makale yayınlanan derginin “Safety Science” ve en etkin kurumun “Center for Disease Control Prevantion” olduğu tespit edilmiştir. Bu çalışma ile iş güvenliği alanında yapılan çalışmaların ağ haritaları, anahtar kelimeler, yayınlar ve ilişkili konular güncel literatürle incelenmiştir.

Kaynakça

  • Al, U. ve Tonta, Y. (2004). Atıf analizi: Hacettepe Üniversitesi Kütüphanecilik Bölümü tezlerinde atıf yapılan kaynaklar.Bilgi Dünyası, 5(1), 19-47.doi: https://doi.org/10.15612/BD.2004.497
  • Ali, F., Park, E. & Chae, B. (2019). 30 years of contemporary hospitality management: Uncovering the bibliometrics and topical trends. International Journal of Contemporary Hospitality Management, 31(7), 2641- 2665. doi: https://doi.org/10.1108/IJCHM-10-2018-0832
  • Archambault, É., Campbell, D., Gingras, Y. & Larivière, V. (2009). Comparing bibliometric statistics obtained from the Web of Science and Scopus. Journal of the American Society for Information Science and Technology, 60(7),1320-1326. doi: https://doi.org/10.1002/asi.21062
  • Aria, M. & Cuccurullo, C. (2017). Bibliometrix: An R-tool for comprehensive science mapping analysis.Journal of Informetrics. 11(4), 959-975. doi: https://doi.org/10.1016/j.joi.2017.08.007
  • Banks, C. (2019). Health, safety, well-being and economic security implications of gig work: An interdisciplinary perspective. 11 Mayıs 2023. https://www.ilo.org/safework/events/safeday/33thinkpieces/WCMS_674004/langzn/index.htm%20adresinden%2 0al%C4%B1nd%C4%B1
  • Barling, J., Loughlin, C.& Kelloway, E. K. (2002). Development and test of a model linking safety-specific transformational leadership and occupational safety. Journal of Applied Psychology, 87(3), 488-496. doi: https://doi.org/10.1037/0021-9010.87.3.488
  • Birch, M. E. & Cary, R. A. (1996). Elemental carbon-based method for monitoring occupational exposures to particulate diesel exhaust. Aerosol Science And Technology, 25(3), 221-241. doi: https://doi.org/10.1080/02786829608965393
  • Boustras, G.& Waring, A. (2020). Towards a reconceptualization of safety and security, their interactions, and policy requirements in a 21st century context. Safety Science, 132(104942), 1-14. doi: https://doi.org/10.1016/j.ssci.2020.104942
  • Carayon, P., Hancock, P., Leveson, N., Noy, I., Sznelwar, L.& Hootegem, G. (2015). Advancing a sociotechnical systems approach to workplace safety – developing the conceptual framework.Ergonomics.58(4), 548-564. doi: https://doi.org/10.1080/00140139.2015.1015623
  • Chen, H., Hou, C., Zhang, L. & Li, S. (2020). Comparative study on the strands of research on the governance model of international occupational safety and healthissues. Safety Science,122, 1-14.doi: https://doi.org/10.1016/j.ssci.2019.104513
  • Choudhry, R. M.& Dongping, F. (2008). Why operatives engage in unsafe work behavior: Investigating factors on construction sites. Safety Science,46(4), 566-584. doi: https://doi.org/10.1016/j.ssci.2007.06.027
  • Christian, M. S., Bradley, J. C., Wallace, C. J. & Burke, M. j. (2009). Workplace safety: A meta analysis of the roles of person and situation factors. Journal Of Applied Psychology, 94(5), 1103-1127. doi: https://doi.org/10.1037/a0016172 ClarivateWeb of Science Core Collection (2022). Erişim adresi: https://clarivate.com/webofsciencegroup/solutions/web-of-science-core-collection/(Erişim tarihi: 01.10.2022)
  • Çoşkun, H. E. ve Tabak, A. (2017). Örgütsel davranış çalıştığımızda aslında ne çalışıyoruz? Türkiye’de yapılan lisansüstü tezler üzerinden bir değerlendirme. İş ve İnsan Dergisi,4(2). 101-111. doi: https://doi.org/10.18394/iid.297985
  • Das, A., & Saha, T. (2014). Authorship trends and collaborative research in the library and information science: a bibliometric study of" Desidoc Journal of Library & Information Technology" during 2005-2014. South Asian Journal of Multidisciplinary Studies (SAJMS), 2(2). 1-10. Retrieved from: http://sajms.iurc.edu.pk/index.php
  • Donthu, N., Kumar, S., Mukherjee, D., Pandey, N.& Lim, W. M. (2021). How to conduct a bibliometric analysis: An overview and guidelines. Journal of Business Research, 133, 285-296. doi: https://doi.org/10.1016/j.jbusres.2021.04.070
  • Ellegaard, O. (2018). The application of bibliometric analysis: disciplinary and user aspects. Scientometrics, 116, 181-202. doi: https://doi.org/10.1007/s11192-018-2765-z
  • Falagas, M. E., Pitsouni, E. I., Malietzis, G. A. & Pappas, G. (2008). Comparison of PubMed, Scopus, Web of Science, and Google Scholar: strengths and weaknesses. The Faseb Journal, 22(2), 338-342. doi: https://doi.org/10.1096/fj.07-9492LSF
  • International Labour Organization (ILO) OSH Management Sysytem: A tool for continual. (2011). Retrieved from: https://www.ilo.org/global/topics/safety-and-health-at-work/events-training/events-meetings/world-daysafety-health-at-work/lang--en/index.htm
  • ILO (2019), Çalışma yaşamının geleceğinin merkezinde sağlık ve güvenlik: 100 Yıllık deneyimden hareketle. https://www.ilo.org/wcmsp5/groups/public/---europe/---ro-geneva/---iloankara/ documents/publication/wcms_693766.pdf
  • Karasözen, B., Bayram, Ö. G. ve Zan, B. U. (2009). 1997-2006 Türkiye Bilim Göstergeleri Analizi. Türk Kütüphaneciliği, 23(1), 4-21. Erişim adresi: https://dergipark.org.tr/tr/pub/tk/issue/48855/622444
  • Kılkış, İ. (2018). İş Sağlığı ve Güvenliği . Dora Basım Yayın Dağıtım.
  • Kim, J., Kang, S. & Lee, K. H. (2021). Evolution of digital marketing communication: Bibliometric analysis and network visualization from key articles. Journal of Business Research, 130, 552-563. doi: https://doi.org/10.1016/j.jbusres.2019.09.043
  • Kiran, S. (2021). Occupational health could be the new normal challenge in the trade and health cycle: Keywords analysis between 1990 and 2020. Safety and Health at Work, 12(2), 272-276. doi: https://doi.org/10.1016/j.shaw.2020.11.003
  • Kyle , S. & Larivière, V. (2022). Who games metrics and rankings? Institutional niches and journal impact factor inflation. Research Policy, 51(10), 1-15. doi: https://doi.org/10.1016/j.respol.2022.104608
  • Li, J. & Hale, A. (2015). Identification of, and knowledge communication among core safety science journals. Safety Science, 74, 70-78. doi: https://doi.org/10.1016/j.ssci.2014.12.003.
  • Li, J. & Hale, A. (2016). Output distributions and topic maps of safety related journals. Safety Science, 82, 236- 244. doi: https://doi.org/10.1016/j.ssci.2015.09.004
  • Ma, J. (2022). Lightweight deep learning models for resource constrained devices. Computational Intelligence and Neuroscience, , 2022, 1-8. doi: https://doi.org/10.1155/2022/4293102
  • Maseda, A., Iturralde, T., Cooper, S. & Aparicio, G. (2022). Mapping women's involvement in family firms: A review based on bibliographic coupling analysis. 24(2), 279-305. doi: https://doi.org/10.1111/ijmr.12278
  • Massimo, A. & Cuccurullo, C. (2017). Bibliometrix: An R-tool for comprehensive science mapping analysis. Journal of Informetrics, 11(4), 959-975. doi: https://doi.org/10.1016/j.joi.2017.08.007
  • Merig, J. & Yang, J.-B. (2017). Accounting research: A Bibliometric analysis. Australian Accounting Review, 27(1), 71-100.doi: https://doi.org/10.1111/auar.12109.
  • Merigó, J. M., Miranda, J., Modak, N. M., Boustras, G. & de la Sotta, C. (2019). Forty years of Safety Science: A bibliometric overview. Safety Science, 115, 66-88. doi: https://doi.org/10.1016/j.ssci.2019.01.029.
  • Mohamed, S. (2002). Safety Climate in construction site environments. Journal of Construction Engineering and Management , 128(5), 375-384. doi: https://doi.org/10.1061/(ASCE)0733-9364(2002)128:5(375)
  • Nahrgang, J. D., Morgeson, F. P. & Hofmann, D. A. (2011). Safety at work: A meta-analytic investigation of the link between job demands, job resources, burnout, engagement, and safety outcomes. Journal of Applied Psychology, 96(1), 71-94. doi: https://doi.org/10.1037/a0021484
  • Naveen , D., Satish , K., Mukherjee, D., Pandey, N. & Lim, W. M. (2021). How to conduct a bibliometric analysis: An overview and guidelines. Journal of Business Research, 133, 285-296. doi: https://doi.org/10.1016/j.jbusres.2021.04.070
  • Neal, A.& Griffin, M. A. (2006). A study of the lagged relationships among safety climate, safety motivation, safety behavior, and accidents at the individual and group levels. Journal of Applied Psychology, 91(4),946-953. doi: https://doi.org/10.1037/0021-9010.91.4.946
  • Newaz, M. T., Ershadi, M., Jefferies, M., Pillay, M.& Davis, P. (2022). A systematic review of contemporary safety management research: a multi-level approach to identifying trending domains in the construction industry. Construction Management and Economics, 41(2), 97-115. doi:https://doi.org/10.1080/01446193.2022.2124527
  • Palaz, S. (2019). Sosyal Bilimlerde İş Sağlığı ve Güvenliği Uygulamaları. Nobel Akademik Yayıncılık Eğitim ve Danışmanlık.
  • Pesta , B., Fuerst, J.& Kirkegaard, E. O. (2018). Bibliometric keyword analysis across seventeen years (2000– 2016) of intelligence articles. Journal of Intelligence, 6(4), 1-12. doi: https://doi.org/10.3390/jintelligence6040046
  • Subramony, M., Golubovskaya, M., Keating, B., Solnet, D., Field, J. & Witheriff, M. (2022). The influence of pandemic-related workplace safety practices on frontline service employee wellbeing outcomes. Journal of Business Research, 149, 363-374. doi: https://doi.org/10.1016/j.jbusres.2022.05.040
  • Sümer, H. H. (2018). İş Sağlığı ve Güvenliği Hukuku. Ankara: Seçkin Yayıncılık.
  • Tamdoğan, O. G. (2009). Bilgi üretiminde yazın ürünleri ve kütüphaneler: Atıfların tespiti ve analizi yoluyla araştırma. Türk Kütüphaneciliği, 23(2), 254-277. Erişim adresi: https://dergipark.org.tr/tr/pub/tk/issue/48929/624162
  • Tonta, Y. (2017). Türkiye’de yayımlanan ve Web of Science’ta dizinlenen dergilerle ilgili bir değerlendirme. Türk Kütüphaneciliği, 31(4), 449-482. Erişim adresi: https://dergipark.org.tr/en/pub/tk/issue/48646/618435 TÜBİTAK Cahit Arf Bilgi Merkezi (2023). Erişim adresi:https://cabim.ulakbim.gov.tr/bibliyometrikanaliz/ bibliyometrik-analiz-sikca-sorulan-sorular/ Van Nunen, K., Li, J., Reniers, G. & Ponnet, K. (2018). Bibliometric analysis of safety culture research. Safety Science, 108, 248-258. doi: https://doi.org/10.1016/j.ssci.2017.08.011
  • Vijayakumarve, R.& Choi, J. H. (2022). Emerging trends of ergonomic risk assessment in construction safety management: A scientometric visualization analysis. International Journal of Environmental Research and Public Health, 19(23), 1-16. doi: https://doi.org/10.3390/ijerph192316120
  • VOSviewer. VOSviewer: Visiualizing Scientific Landscape (2022)Retrieved from: https://www.vosviewer.com/features/highlights
  • Wani, S. A., Akhter, M. & Musthtaq, R. (2021). Bibliometric analysis of google scholar indexed top journals in socialsciences. Journal Of Indian Library Association, 57(3), 41-52. Retrieved from: https://ilaindia.net/jila/index.php/jila/article/view/674
  • Yalçın, S., Yavuz, H. Ç. ve Dibek, M. İ. (2015). En yüksek etki faktörüne sahip eğitim dergilerindeki makalelerin içerik analizi. Eğitim ve Bilim, 40(182), 1-28. doi: https://doi.org/10.15390/EB.2015.4868
  • Yıldız, A. N., & Şahan , C. (2020). İş sağlığı ve güvenliği temel kavramlar. İçinde A. N. Yıldız, & A. Sandal, İş Sağlığı ve Güvenliği Meslek Hastalıkları (s. 27). Hacettepe Üniversitesi Yayınları.
  • Zeng, L. & Li, R. M. (2022). Construction safety and health hazard awareness in Web of Science and Weibo between 1991 and 2021. Safety Science, 152, 1-14. doi: https://doi.org/10.1016/j.ssci.2022.105790
  • Zohar, D. (1980). Safety climate in industrial organization: Theoretical and applied implications. Journal of Applied Psychology, 65(1), 96-102. doi: https://doi.org/10.1037/0021-9010.65.1.96
Yıl 2024, Cilt: 8 Sayı: 1, 290 - 306, 18.07.2024
https://doi.org/10.56554/jtom.1244801

Öz

Kaynakça

  • Al, U. ve Tonta, Y. (2004). Atıf analizi: Hacettepe Üniversitesi Kütüphanecilik Bölümü tezlerinde atıf yapılan kaynaklar.Bilgi Dünyası, 5(1), 19-47.doi: https://doi.org/10.15612/BD.2004.497
  • Ali, F., Park, E. & Chae, B. (2019). 30 years of contemporary hospitality management: Uncovering the bibliometrics and topical trends. International Journal of Contemporary Hospitality Management, 31(7), 2641- 2665. doi: https://doi.org/10.1108/IJCHM-10-2018-0832
  • Archambault, É., Campbell, D., Gingras, Y. & Larivière, V. (2009). Comparing bibliometric statistics obtained from the Web of Science and Scopus. Journal of the American Society for Information Science and Technology, 60(7),1320-1326. doi: https://doi.org/10.1002/asi.21062
  • Aria, M. & Cuccurullo, C. (2017). Bibliometrix: An R-tool for comprehensive science mapping analysis.Journal of Informetrics. 11(4), 959-975. doi: https://doi.org/10.1016/j.joi.2017.08.007
  • Banks, C. (2019). Health, safety, well-being and economic security implications of gig work: An interdisciplinary perspective. 11 Mayıs 2023. https://www.ilo.org/safework/events/safeday/33thinkpieces/WCMS_674004/langzn/index.htm%20adresinden%2 0al%C4%B1nd%C4%B1
  • Barling, J., Loughlin, C.& Kelloway, E. K. (2002). Development and test of a model linking safety-specific transformational leadership and occupational safety. Journal of Applied Psychology, 87(3), 488-496. doi: https://doi.org/10.1037/0021-9010.87.3.488
  • Birch, M. E. & Cary, R. A. (1996). Elemental carbon-based method for monitoring occupational exposures to particulate diesel exhaust. Aerosol Science And Technology, 25(3), 221-241. doi: https://doi.org/10.1080/02786829608965393
  • Boustras, G.& Waring, A. (2020). Towards a reconceptualization of safety and security, their interactions, and policy requirements in a 21st century context. Safety Science, 132(104942), 1-14. doi: https://doi.org/10.1016/j.ssci.2020.104942
  • Carayon, P., Hancock, P., Leveson, N., Noy, I., Sznelwar, L.& Hootegem, G. (2015). Advancing a sociotechnical systems approach to workplace safety – developing the conceptual framework.Ergonomics.58(4), 548-564. doi: https://doi.org/10.1080/00140139.2015.1015623
  • Chen, H., Hou, C., Zhang, L. & Li, S. (2020). Comparative study on the strands of research on the governance model of international occupational safety and healthissues. Safety Science,122, 1-14.doi: https://doi.org/10.1016/j.ssci.2019.104513
  • Choudhry, R. M.& Dongping, F. (2008). Why operatives engage in unsafe work behavior: Investigating factors on construction sites. Safety Science,46(4), 566-584. doi: https://doi.org/10.1016/j.ssci.2007.06.027
  • Christian, M. S., Bradley, J. C., Wallace, C. J. & Burke, M. j. (2009). Workplace safety: A meta analysis of the roles of person and situation factors. Journal Of Applied Psychology, 94(5), 1103-1127. doi: https://doi.org/10.1037/a0016172 ClarivateWeb of Science Core Collection (2022). Erişim adresi: https://clarivate.com/webofsciencegroup/solutions/web-of-science-core-collection/(Erişim tarihi: 01.10.2022)
  • Çoşkun, H. E. ve Tabak, A. (2017). Örgütsel davranış çalıştığımızda aslında ne çalışıyoruz? Türkiye’de yapılan lisansüstü tezler üzerinden bir değerlendirme. İş ve İnsan Dergisi,4(2). 101-111. doi: https://doi.org/10.18394/iid.297985
  • Das, A., & Saha, T. (2014). Authorship trends and collaborative research in the library and information science: a bibliometric study of" Desidoc Journal of Library & Information Technology" during 2005-2014. South Asian Journal of Multidisciplinary Studies (SAJMS), 2(2). 1-10. Retrieved from: http://sajms.iurc.edu.pk/index.php
  • Donthu, N., Kumar, S., Mukherjee, D., Pandey, N.& Lim, W. M. (2021). How to conduct a bibliometric analysis: An overview and guidelines. Journal of Business Research, 133, 285-296. doi: https://doi.org/10.1016/j.jbusres.2021.04.070
  • Ellegaard, O. (2018). The application of bibliometric analysis: disciplinary and user aspects. Scientometrics, 116, 181-202. doi: https://doi.org/10.1007/s11192-018-2765-z
  • Falagas, M. E., Pitsouni, E. I., Malietzis, G. A. & Pappas, G. (2008). Comparison of PubMed, Scopus, Web of Science, and Google Scholar: strengths and weaknesses. The Faseb Journal, 22(2), 338-342. doi: https://doi.org/10.1096/fj.07-9492LSF
  • International Labour Organization (ILO) OSH Management Sysytem: A tool for continual. (2011). Retrieved from: https://www.ilo.org/global/topics/safety-and-health-at-work/events-training/events-meetings/world-daysafety-health-at-work/lang--en/index.htm
  • ILO (2019), Çalışma yaşamının geleceğinin merkezinde sağlık ve güvenlik: 100 Yıllık deneyimden hareketle. https://www.ilo.org/wcmsp5/groups/public/---europe/---ro-geneva/---iloankara/ documents/publication/wcms_693766.pdf
  • Karasözen, B., Bayram, Ö. G. ve Zan, B. U. (2009). 1997-2006 Türkiye Bilim Göstergeleri Analizi. Türk Kütüphaneciliği, 23(1), 4-21. Erişim adresi: https://dergipark.org.tr/tr/pub/tk/issue/48855/622444
  • Kılkış, İ. (2018). İş Sağlığı ve Güvenliği . Dora Basım Yayın Dağıtım.
  • Kim, J., Kang, S. & Lee, K. H. (2021). Evolution of digital marketing communication: Bibliometric analysis and network visualization from key articles. Journal of Business Research, 130, 552-563. doi: https://doi.org/10.1016/j.jbusres.2019.09.043
  • Kiran, S. (2021). Occupational health could be the new normal challenge in the trade and health cycle: Keywords analysis between 1990 and 2020. Safety and Health at Work, 12(2), 272-276. doi: https://doi.org/10.1016/j.shaw.2020.11.003
  • Kyle , S. & Larivière, V. (2022). Who games metrics and rankings? Institutional niches and journal impact factor inflation. Research Policy, 51(10), 1-15. doi: https://doi.org/10.1016/j.respol.2022.104608
  • Li, J. & Hale, A. (2015). Identification of, and knowledge communication among core safety science journals. Safety Science, 74, 70-78. doi: https://doi.org/10.1016/j.ssci.2014.12.003.
  • Li, J. & Hale, A. (2016). Output distributions and topic maps of safety related journals. Safety Science, 82, 236- 244. doi: https://doi.org/10.1016/j.ssci.2015.09.004
  • Ma, J. (2022). Lightweight deep learning models for resource constrained devices. Computational Intelligence and Neuroscience, , 2022, 1-8. doi: https://doi.org/10.1155/2022/4293102
  • Maseda, A., Iturralde, T., Cooper, S. & Aparicio, G. (2022). Mapping women's involvement in family firms: A review based on bibliographic coupling analysis. 24(2), 279-305. doi: https://doi.org/10.1111/ijmr.12278
  • Massimo, A. & Cuccurullo, C. (2017). Bibliometrix: An R-tool for comprehensive science mapping analysis. Journal of Informetrics, 11(4), 959-975. doi: https://doi.org/10.1016/j.joi.2017.08.007
  • Merig, J. & Yang, J.-B. (2017). Accounting research: A Bibliometric analysis. Australian Accounting Review, 27(1), 71-100.doi: https://doi.org/10.1111/auar.12109.
  • Merigó, J. M., Miranda, J., Modak, N. M., Boustras, G. & de la Sotta, C. (2019). Forty years of Safety Science: A bibliometric overview. Safety Science, 115, 66-88. doi: https://doi.org/10.1016/j.ssci.2019.01.029.
  • Mohamed, S. (2002). Safety Climate in construction site environments. Journal of Construction Engineering and Management , 128(5), 375-384. doi: https://doi.org/10.1061/(ASCE)0733-9364(2002)128:5(375)
  • Nahrgang, J. D., Morgeson, F. P. & Hofmann, D. A. (2011). Safety at work: A meta-analytic investigation of the link between job demands, job resources, burnout, engagement, and safety outcomes. Journal of Applied Psychology, 96(1), 71-94. doi: https://doi.org/10.1037/a0021484
  • Naveen , D., Satish , K., Mukherjee, D., Pandey, N. & Lim, W. M. (2021). How to conduct a bibliometric analysis: An overview and guidelines. Journal of Business Research, 133, 285-296. doi: https://doi.org/10.1016/j.jbusres.2021.04.070
  • Neal, A.& Griffin, M. A. (2006). A study of the lagged relationships among safety climate, safety motivation, safety behavior, and accidents at the individual and group levels. Journal of Applied Psychology, 91(4),946-953. doi: https://doi.org/10.1037/0021-9010.91.4.946
  • Newaz, M. T., Ershadi, M., Jefferies, M., Pillay, M.& Davis, P. (2022). A systematic review of contemporary safety management research: a multi-level approach to identifying trending domains in the construction industry. Construction Management and Economics, 41(2), 97-115. doi:https://doi.org/10.1080/01446193.2022.2124527
  • Palaz, S. (2019). Sosyal Bilimlerde İş Sağlığı ve Güvenliği Uygulamaları. Nobel Akademik Yayıncılık Eğitim ve Danışmanlık.
  • Pesta , B., Fuerst, J.& Kirkegaard, E. O. (2018). Bibliometric keyword analysis across seventeen years (2000– 2016) of intelligence articles. Journal of Intelligence, 6(4), 1-12. doi: https://doi.org/10.3390/jintelligence6040046
  • Subramony, M., Golubovskaya, M., Keating, B., Solnet, D., Field, J. & Witheriff, M. (2022). The influence of pandemic-related workplace safety practices on frontline service employee wellbeing outcomes. Journal of Business Research, 149, 363-374. doi: https://doi.org/10.1016/j.jbusres.2022.05.040
  • Sümer, H. H. (2018). İş Sağlığı ve Güvenliği Hukuku. Ankara: Seçkin Yayıncılık.
  • Tamdoğan, O. G. (2009). Bilgi üretiminde yazın ürünleri ve kütüphaneler: Atıfların tespiti ve analizi yoluyla araştırma. Türk Kütüphaneciliği, 23(2), 254-277. Erişim adresi: https://dergipark.org.tr/tr/pub/tk/issue/48929/624162
  • Tonta, Y. (2017). Türkiye’de yayımlanan ve Web of Science’ta dizinlenen dergilerle ilgili bir değerlendirme. Türk Kütüphaneciliği, 31(4), 449-482. Erişim adresi: https://dergipark.org.tr/en/pub/tk/issue/48646/618435 TÜBİTAK Cahit Arf Bilgi Merkezi (2023). Erişim adresi:https://cabim.ulakbim.gov.tr/bibliyometrikanaliz/ bibliyometrik-analiz-sikca-sorulan-sorular/ Van Nunen, K., Li, J., Reniers, G. & Ponnet, K. (2018). Bibliometric analysis of safety culture research. Safety Science, 108, 248-258. doi: https://doi.org/10.1016/j.ssci.2017.08.011
  • Vijayakumarve, R.& Choi, J. H. (2022). Emerging trends of ergonomic risk assessment in construction safety management: A scientometric visualization analysis. International Journal of Environmental Research and Public Health, 19(23), 1-16. doi: https://doi.org/10.3390/ijerph192316120
  • VOSviewer. VOSviewer: Visiualizing Scientific Landscape (2022)Retrieved from: https://www.vosviewer.com/features/highlights
  • Wani, S. A., Akhter, M. & Musthtaq, R. (2021). Bibliometric analysis of google scholar indexed top journals in socialsciences. Journal Of Indian Library Association, 57(3), 41-52. Retrieved from: https://ilaindia.net/jila/index.php/jila/article/view/674
  • Yalçın, S., Yavuz, H. Ç. ve Dibek, M. İ. (2015). En yüksek etki faktörüne sahip eğitim dergilerindeki makalelerin içerik analizi. Eğitim ve Bilim, 40(182), 1-28. doi: https://doi.org/10.15390/EB.2015.4868
  • Yıldız, A. N., & Şahan , C. (2020). İş sağlığı ve güvenliği temel kavramlar. İçinde A. N. Yıldız, & A. Sandal, İş Sağlığı ve Güvenliği Meslek Hastalıkları (s. 27). Hacettepe Üniversitesi Yayınları.
  • Zeng, L. & Li, R. M. (2022). Construction safety and health hazard awareness in Web of Science and Weibo between 1991 and 2021. Safety Science, 152, 1-14. doi: https://doi.org/10.1016/j.ssci.2022.105790
  • Zohar, D. (1980). Safety climate in industrial organization: Theoretical and applied implications. Journal of Applied Psychology, 65(1), 96-102. doi: https://doi.org/10.1037/0021-9010.65.1.96
Toplam 49 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular Mühendislik
Bölüm Araştırma Makalesi
Yazarlar

Hatice Özdemir 0000-0003-4449-2433

Ramazan Kayabaşı 0000-0001-6195-7445

Erken Görünüm Tarihi 18 Temmuz 2024
Yayımlanma Tarihi 18 Temmuz 2024
Gönderilme Tarihi 30 Ocak 2023
Kabul Tarihi 26 Nisan 2024
Yayımlandığı Sayı Yıl 2024 Cilt: 8 Sayı: 1

Kaynak Göster

APA Özdemir, H., & Kayabaşı, R. (2024). Web of Science Veri Tabanında Bibliyometrik Bir Araştırma: İş Güvenliği Makaleleri. Journal of Turkish Operations Management, 8(1), 290-306. https://doi.org/10.56554/jtom.1244801
AMA Özdemir H, Kayabaşı R. Web of Science Veri Tabanında Bibliyometrik Bir Araştırma: İş Güvenliği Makaleleri. JTOM. Temmuz 2024;8(1):290-306. doi:10.56554/jtom.1244801
Chicago Özdemir, Hatice, ve Ramazan Kayabaşı. “Web of Science Veri Tabanında Bibliyometrik Bir Araştırma: İş Güvenliği Makaleleri”. Journal of Turkish Operations Management 8, sy. 1 (Temmuz 2024): 290-306. https://doi.org/10.56554/jtom.1244801.
EndNote Özdemir H, Kayabaşı R (01 Temmuz 2024) Web of Science Veri Tabanında Bibliyometrik Bir Araştırma: İş Güvenliği Makaleleri. Journal of Turkish Operations Management 8 1 290–306.
IEEE H. Özdemir ve R. Kayabaşı, “Web of Science Veri Tabanında Bibliyometrik Bir Araştırma: İş Güvenliği Makaleleri”, JTOM, c. 8, sy. 1, ss. 290–306, 2024, doi: 10.56554/jtom.1244801.
ISNAD Özdemir, Hatice - Kayabaşı, Ramazan. “Web of Science Veri Tabanında Bibliyometrik Bir Araştırma: İş Güvenliği Makaleleri”. Journal of Turkish Operations Management 8/1 (Temmuz 2024), 290-306. https://doi.org/10.56554/jtom.1244801.
JAMA Özdemir H, Kayabaşı R. Web of Science Veri Tabanında Bibliyometrik Bir Araştırma: İş Güvenliği Makaleleri. JTOM. 2024;8:290–306.
MLA Özdemir, Hatice ve Ramazan Kayabaşı. “Web of Science Veri Tabanında Bibliyometrik Bir Araştırma: İş Güvenliği Makaleleri”. Journal of Turkish Operations Management, c. 8, sy. 1, 2024, ss. 290-06, doi:10.56554/jtom.1244801.
Vancouver Özdemir H, Kayabaşı R. Web of Science Veri Tabanında Bibliyometrik Bir Araştırma: İş Güvenliği Makaleleri. JTOM. 2024;8(1):290-306.

2229319697  logo   logo-minik.png 200311739617396