A Response Surface Modeling Study on Effects of Powder Rate and Machining Parameters on Surface Quality of CoCrMo Processed by Powder Mixed Electrical Discharge Machining
Öz
Due to the high mechanical strength of the metals used in implant manufacture, which makes them difficult to work with using other machining techniques, electrical discharge machining (EDM) is frequently employed in the production of implants. In this study, the effect of powder ratio and other EDM parameters used in the machining of CoCrMo alloy, which used in implant production widely, with powder-mixed EDM on the surface roughness of the machined part was investigated through the response surface methodology. AISI 316L stainless steel was chosen as the electrode material, and Ti6V4Al was chosen as the additive powder, taking into account their biocompatibility properties. Using a Taguchi L16 array, an experimental design was created by selecting 4 levels for each parameter of additive ratio, discharge current, pulse on time (Ton), and pulse off time (Toff). The response surface method was used, along with the experimental data, to estimate how the parameters affected the arithmetic average roughness (Ra) and mean roughness depth (Rz).
Anahtar Kelimeler
Powder Mixed EDM, CoCrMo, Response Surface Methodology, Mathematical Modeling
Teşekkür
We would like to thank the Payas Vocational and Technical Anatolian High School Directorate for their support.
Kaynakça
- Abdel-Fattah, T. M., Loftis, D., & Mahapatro, A. (2011). Nanosized Controlled Surface Pretreatment of Biometallic Alloy 316L Stainless Steel. Journal of Biomedical Nanotechnology, 7(6), 794–800. https://doi.org/10.1166/jbn.2011.1346
- Al-Amin, M., Abdul-Rani, A.-M., Aliyu, A. A., Bryant, M., Danish, M., & Ahmad, A. (2020). Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review. Materials and Manufacturing Processes. https://doi.org/10.1080/10426914.2020.1772483
- Ali, S., Rani, A. M. A., Mufti, R. A., Azam, F. I., Hastuty, S., Baig, Z., Hussain, M., & Shehzad, N. (2019). The Influence of Nitrogen Absorption on Microstructure, Properties and Cytotoxicity Assessment of 316L Stainless Steel Alloy Reinforced with Boron and Niobium. Processes.
- Augustyn-Pieniążek, J., Lukaszczyk, A., & Zapala, R. (2013). Microstructure and Corrosion Resistance Characteristics of Cr-Co-Mo Alloys Designed for Prosthetic Materials. Archives of Metallurgy and Materials, 58(4), 1281–1285. https://doi.org/10.2478/amm-2013-0148
- Cakir, M. v, Eyercioglu, O., Gov, K., Sahin, M., & Cakir, S. H. (2013). Comparison of Soft Computing Techniques for Modelling of the EDM Performance Parameters. Advances in Mechanical Engineering, 5, 392531. https://doi.org/10.1155/2013/392531
- Chakmakchi, M., Ntasi, A., Mueller, W. D., & Zinelis, S. (2021). Effect of Cu and Ti electrodes on surface and electrochemical properties of Electro Discharge Machined (EDMed) structures made of Co-Cr and Ti dental alloys. Dental Materials, 37(4), 588–596. https://doi.org/https://doi.org/10.1016/j.dental.2021.01.012
- David Whitehouse. (2002). Surfaces and Their Measurement. Hermes Penton Ltd.
- Dinov, I. (2020). F distribution Tables. http://www.socr.ucla.edu/applets.dir/f_table.html
- Elsiti, N. M., & Noordin, M. Y. (2017). Experimental Investigations into the Effect of Process Parameters and Nano-Powder (Fe2O3) on Material Removal Rate during Micro-EDM of Co-Cr-Mo. Key Engineering Materials, 740, 125–132. https://doi.org/10.4028/www.scientific.net/KEM.740.125
- Elsiti, N., Mohd Yusof, N., & Idris, A. (2017). Effect of maghemite (γ-Fe2O3) nano-powder mixed dielectric medium on tool wear rate (TWR) during micro-EDM of CO-Cr-MO. Pertanika Journal of Science and Technology, 25, 847–858.
kapsamında lisanslanmıştır.