Investigation Mechanical Properties of Shipbuilding Steel Joined By Submerged Metal Arc Welding And Gas Metal Arc Welding Methods
Öz
Merchant ships are generally built by joining steels with various welding methods. When the welding methods used in shipyards are examined, it is seen that gas metal arc welding (GMAW), submerged arc welding (SAW), covered electrode arc welding and tungsten inert gas (TIG) welding come to the fore. In the assembly of ship hull sheets, GMAW and SAW are generally preferred. In this sense, it is extremely important to characterize the mechanical properties of the weld zone after welding of the shipbuilding steel joined by these two welding methods. When the studies examined, although there are few studies on the joining with GMAW and SAW of shipbuilding steels, no study has been found on the comparative examination of these two welding methods. In this context, within the scope of the study, 3701 shipbuilding steel, which is used extensively in shipbuilding, was joined with SAW and GMAW methods and the hardness, tensile, impact and bending properties of the welding zone were examined comparatively. In consequence of the tests, it was determined that higher mechanical properties were obtained than the base metal in both welding methods. Also, it was found that the welding zone of the shipbuilding steel joint by the SAW method had relatively better mechanical qualities.
Anahtar Kelimeler
Shipbuilding, gas metal arc welding, submerged arc welding, mechanical properties.
Teşekkür
We appreciate Professor Gencaga Purcek from the Karadeniz Technical University's Mechanical Engineering Department for sharing his laboratory with us.
Kaynakça
- Donizete Borba, T. M., Duarte Flores, W., de Oliveira Turani, L., & Cardoso Junior, R. (2017) ‘’Assessment of the Weldability of EH36 TMCP Shipbuilding Steel Welded by High Heat Input Submerged Arc Welding’’, Welding International, 31(3), 184-195.
- Gook, S., Midik, A., Biegler, M., Gumenyuk, A., & Rethmeier, M. (2022) ‘’Joining 30 mm Thick Shipbuilding Steel Plates EH36 Using a Process Combination of Hybrid Laser Arc Welding and Submerged Arc Welding’’, Journal of Manufacturing and Materials Processing, 6(4), 84.
- Hajian, M., Abdollah-zadeh, A., Rezaei-Nejad, S. S., Assadi, H., Hadavi, S. M. M., Chung, K., & Shokouhimehr, M. (2015) ‘’Microstructure and mechanical properties of friction stir processed AISI 316L stainless steel’’, Materials & Design, 67, 82-94.
- Jokinen, T., Vihervä, T., Riikonen, H., & Kujanpää, V. (2000) ’’Welding of ship structural steel A36 using a Nd:YAG laser and gas–metal arc welding’’, Journal of Laser Applications, 12(5), 185-188.
- Kim, C.-M., Lee, J.-B., & Choo, W.-Y. (2003) ‘’Characteristics of Single Pass Welds In 50kJ/mm of Heavy Thickness Shipbuilding Steel’’ Paper presented at the The Thirteenth International Offshore and Polar Engineering Conference.
- Pamnani, R., Vasudevan, M., Jayakumar, T., & Vasantharaja, P. (2017) ‘’Development of Activated Flux, Optimization of Welding Parameters and Characterization of Weld Joint for DMR-249A Shipbuilding Steel’’, Transactions of the Indian Institute of Metals, 70(1), 49-57.
- Pan, Z., Larkin, N., Li, H., Van Duin, S., Shen, C., Lang, D., & Sterjovski, Z. (2013) ‘’Evaluation of tandem gas metal arc welding for low distortion butt-welds in naval shipbuilding’’, Australasian Welding Journal, 58 (2).
- Sekban, D. M. (2021) ‘’Effects of Heat Treatment and Severe Plastic Deformation on Microstructure, Mechanical Properties and Midsection Ultimate Strength of Shipbuilding Steel’’, Journal of Materials Engineering and Performance, 30(10), 7805-7816.
- Sekban, D. M., Aktarer, S. M., & Purcek, G. (2019) ‘’Friction Stir Welding of Low-Carbon Shipbuilding Steel Plates: Microstructure, Mechanical Properties, and Corrosion Behavior’’, Metallurgical and Materials Transactions A, 50(9), 4127-4140.
- Sirisatien, T., Mahabunphachai, S., & Sojiphan, K. (2018) ‘’Effect of submerged arc welding process with one-side one-pass welding technique on distortion behavior of shipbuilding steel plate ASTM A131 grade A.’’, Materials Today: Proceedings, 5(3, Part 2), 9543-9551.
kapsamında lisanslanmıştır.