Kaynaklı Üretimde Kalite Yönetimi Ve FMEA Yöntemi İle Hata Analizi; İnşaat Makinaları Üretiminde Bir Uygulama

Öz

Günümüz rekabetçi üretim sektöründe kalite yönetimi ve hata analiz teknikleri, sürdürülebilir başarı için kritik öneme sahiptir. Bu çalışma, iş ve inşaat makineleri üreten bir firmada kaynaklı imalat süreçlerine Hata Türü ve Etkileri Analizi (FMEA) yönteminin uygulanmasını ele almaktadır. Kaynaklı üretimde oluşabilecek hatalar belirlenmiş, bu hataların olasılık, şiddet ve tespit edilebilirlik değerleri kullanılarak Risk Öncelik Sayısı hesaplanmıştır. Analiz sonucunda en kritik hata türleri tespit edilerek önleyici ve düzeltici tedbirler önerilmiştir. Bulgular, insan faktörüne bağlı hataların önemli olduğunu, süreç iyileştirmeleri ve eğitimle bu hataların azaltılabileceğini göstermektedir.

Anahtar Kelimeler

• FMEA (Hata Türü ve Etkileri Analizi)
• Kaynaklı Üretim
• Kalite Yönetimi
• Risk Öncelik Sayısı (RÖS)
• Üretim Hata Analizi

Quality Management In Welded Manufacturing And Failure Analysis With The FMEA Method: An Application İn Construction Machinery Manufacturing

Öz

In today’s competitive manufacturing industry, quality management and failure analysis techniques are critical to achieving sustainable success. This study examines the application of the Failure Mode and Effects Analysis (FMEA) method to welded manufacturing processes in a company producing construction and industrial machinery. Potential failures in welded production were identified, and Risk Priority Numbers were calculated using occurrence, severity, and detectability values. As a result of the analysis, the most critical failure modes were identified and preventive and corrective actions were proposed. The findings indicate that human-related errors are significant; however, these errors can be reduced through process improvements and employee training.

Anahtar Kelimeler

• FMEA (Failure Mode and Effects Analysis)
• Welded production
• Quality Management
• Risk priority number (RPN)
• Production error analysis

Kaynakça

1. [1] Juran JM., “Juran’s Quality Handbook. 4th ed., “Mc Graw Hill, New York, USA, 1999.
2. [2] Deming WE., “Principles for transformation of Western Management,” Out of the Crisis, 18-96, Cambridge, Massachusetts, USA, 1986.
3. [3] Messler Jr RW., “A Practical guide to welding solutions: overcoming technical and material-specific issues,” John Wiley & Sons, 2019.
4. [4] Natarajan D., “ISO 9001 Quality Management Systems,” Springer International Publishing, Cham, Switzerland, 2017.
5. [5] Crosby PB., “Quality Is Free: The Art of Making Quality Certain,” McGraw-Hill, New York, USA, 1979.
6. [6] Oakland JS., “Total Quality Management: Text with Cases. 3rd ed.,” Routledge, London, England, 2003.
7. [7] Wu, A., Liu, W., & Nie, W., Literature Review and Prospect of the Development and Application of FMEA in Manufacturing Industry, The International Journal of Advanced Manufacturing Technology, 112, 1409–1436, 2021, doi:10.1007/s00170-020-06425-0.
8. [8] Altınışık, A., Hugul, O., The seven-step failure diagnosis in automotive industry. Engineering Failure Analysis, 116: 104702, 2020, doi: 10.1016/j.engfailanal.2020.104702.

9. [9] Stamatis DH., “Failure Mode and Effect Analysis: FMEA from Theory to Execution,” ASQ Quality Press, Milwaukee, USA, 2003.
10. [10] Subriadi, A. P. and Najwa, N. F., The consistency analysis of failure mode and effect analysis (FMEA) in information technology risk assessment, Heliyon, 6(1), pp. 1-12, 2020, doi: 10.1016/j.heliyon.2020.e03161.
11. [11] Aydoğdu K, Genel K., “Kaynaklı bağlantıların yorulma dayanımını etkileyen faktörler”. Sakarya University Journal of Science, 6(1), 84-89, 2002, doi: 10.16984/saufbed.20674.
12. [12] Wirani AP, Janwar M, Wajdi MS., “Application of the FMEA Method to Know the Factors Causing Weld Defects in the Boiler Fabrication Process”. International Journal of Social and Management Studies, 2(2), 106-114, 2021, doi: 10.5555/ijosmas.v2i1.285.
13. [13] Türker A., “Kaynak Hataları. Yüksek Lisans Tezi,” Marmara Üniversitesi, İstanbul, Türkiye, 2005.
14. [14] Conte, R., Izquierdo, D.R. & Francesco, G. Submerged arc welding process: a numerical investigation of temperatures, displacements, and residual stresses in ASTM A516-Gr70 corner joined samples. Int J Adv Manuf Technol 127, 5437–5448 (2023), doi: 10.1007/s00170-023-11908-x.
15. [15] Mercan S., “Kaynak bağlantılarında hasar analizi”. International Journal of Innovative Engineering Applications, 3(2), 67-75, 2019. https://izlik.org/JA37EA85GD.
16. [16] O’Brien RL, “Welding Handbook: Welding Processes, Vol2.,” American Welding Society, 1991.
17. [17] Rizvi SA, Ali W., “Welding defects, Causes and their Remedies: A Review”. Indian Welding Journal, 53(1), 42-47, 2020, doi: 10.24036/tm.v2i2.3272.
18. [18] Sharma KD, Srivastava S., “Failure mode and effect analysis (FMEA) implementation: a literature review”. Journal of Advance Research in Aeronautics and Space Science, 5(1), 1-17, 2018.
19. [19] Gueorguiev, T., Kokalarov, M., Sakakushev, B., Recent trends in FMEA methodology. 2020 7th International Conference on Energy Efficiency and Agricultural Engineering (EE&AE), Konferans Bildiri Kitabı, 2020.
20. [20] Mendi, T. C., & Aydoğan, H., Motor Montaj Fabrikasında Subap Sarma Sorunu Üzerine Proses Hata Türleri ve Etkileri Analizi (PFMEA) ve İyileştirmeleri Çalışması. MASJournal of Applied Sciences, 10(1), 161-178, 2025, doi: 10.5281/zenodo.15099329.
21. [21] Jalal, M. R. S. A., & Yusim, A. K., Welding quality control using the failure modes and effects analysis (FMEA) method at PT. X. Journal of Marine-Earth Science Technology, 5(2), 42–48, 2024, doi: 10.12962/j27745449.v5i2.1807.
22. [22] Bangun, C. S., Maulana, A., Rasjidin, R., & Rahman, T., Application of SPC and FMEA methods to reduce the level of hollow product defects. Jurnal Teknik Industri, 8(1), 12-16, 2022, doi: 10.24014/jti.v8i1.16681