Stüdyo tipi dairedeki aktiviteleri desteklemek için çok fonksiyonlu mutfak seti tasarımı: Endonezya, Jakarta, Kebagusan şehri örneği

Öz

Zamanla Endonezya nüfusu artış göstermiş ve bu da yaşam alanı talebinde yükselişe yol açmıştır. Sınırlı arazi mevcudiyeti nedeniyle, apartman daireleri gibi dikey yaşam alanları birçok kişi için bir seçenek haline gelmiştir. Ancak bu yaşam alanlarının dezavantajı, odaların dar ve sıkışık hissettirmesine neden olan küçük boyutlarıdır. Özellikle mutfak takımlarının büyüklüğü göz önüne alındığında, mutfak apartman dairelerinde alanın önemli bir bölümünü kaplayan alanlardan biridir. Yine de, verimsiz mutfak takımları nedeniyle yemek pişirme faaliyetlerinin etkili bir şekilde gerçekleştirilemediği durumlar hala mevcuttur. Ayrıca, alan kısıtlamaları nedeniyle bazı apartman dairelerinde yemek yeme veya çalışma alanları bulunmamaktadır. Ancak yemek yeme ve çalışma, günümüzde özel alanı daha konforlu hale getirmek için gerekli temel ihtiyaçlardır. Bu tasarım, odayı sıkışık veya dağınık hissettirmeden, aynı alanda yemek pişirme, yemek yeme ve çalışma faaliyetlerini rahat ve etkili bir şekilde kolaylaştırmayı amaçlamaktadır.

Anahtar Kelimeler

• mobilya
• mutfak seti
• çok fonksiyonlu
• yerden tasarruf

Multifunctional kitchen set design to support activities in a studio type apartment: study case Kebagusan city Jakarta, Indonesia

Öz

Over time, the population of Indonesia has experienced an increase, leading to a rise in the demand for living space. Due to limited land availability, vertical living spaces such as apartments have become an option for many individuals. However, the drawback of these living spaces is their small size, which can make the rooms feel cramped and congested. The kitchen is one of the areas that takes up a significant portion of space within apartments, especially considering the size of kitchen sets. Nevertheless, there are still cases where cooking activities cannot be effectively carried out due to inefficient kitchen sets. Additionally, due to space constraints, some apartments do not provide areas for dining or working. However, dining and working are basic necessities that are needed to make private space more comfortable nowadays. This design aims to facilitate cooking, dining, and working activities comfortably and effectively within the same area without making the room feel cramped or cluttered.

Anahtar Kelimeler

• furniture
• kitchen set
• multifunction
• space saving
• knock down

Kaynakça

1. Astonkar, D. V. (2017). Prototype, CAD modeling of multipurpose furniture by using space saving with tyres & tubes. Conference paper. ELIXIR G D Goenka University Conference, New Delhi, India, https://www.researchgate.net/publication/323004136_Prototype_CAD_ Modeling_of_multipurpose_furniture_by_using_space_saving_with_Tyres_Tubes
2. Azzahra, Y., Pujiraharjo, and C. Chalik., (2023), Perancangan kitchen set dengan sistem expandable untuk apartemen azalea suites tipe studio [Design of an expandable kitchen set for a studio-type unit at Azalea Suites Apartments], eProceedings of Art & Design, 10(1), 300-312, https://openlibrarypublications.telkomuniversity.ac.id/index.php/artdesign
3. Branowski, B., Starczewski, K., Zabłocki, M., and Sydor, M. (2020). Design issues of innovative furniture fasteners for wood-based boards, BioResources, 15(4), 8472–8495
4. Cheng, H. Y., Ng, P. K., Nathan, R. J., Saptari, A., Ng, Y. J., Yeow, J. A., and Ng, K. Y., (2021). The conceptualisation and development of a space-saving multipurpose table for enhanced ergonomic performance, Inventions, vol 6(4), Article 67, https://doi.org/10.3390/inventions6040067
5. Desai, A., and Mital, A. (2006). Design for maintenance: Basic concepts and review of literature. International Journal of Product Development, 3(1), 77–121, https://doi.org/10.1504/IJPD.2006.008876
6. Formentini, G., Boix Rodríguez, N., and Favi, C., (2022), Design for manufacturing and assembly methods in the product development process of mechanical products: A systematic literature review, The International Journal of Advanced Manufacturing Technology, 120, 3185–3207. https://doi.org/10.1007/s00170-022-08837-6
7. GlobalSpec. (2023). Bolts information. Retrieved July 1, 2025, from https://www.globalspec.com/learnmore/mechanical_components/mechanical_fasteners/bolts
8. Hassan, M. F., Safiee, M. Z., Nor, N. H. M., Rahman, M. N. A., and Masood, I. (2016). Integration of ECQFD and weighted decision matrix for selection of eco-design alternatives. International Journal of Mechanical & Mechatronics Engineering (IJMME-IJENS), 16(3), 27–33.

9. IBMH Corp. (2016, November 18). Featured product: MiniFix system. https://www.ibmhcorp.com/en/featured-product-minifix-system/
10. Labib, A. M. A. (2019). Space-saving and multiple using furniture. International Journal of Design & Fashion Studies. https://doi.org/10.21608/IJDFS.2019.180019
11. Lumakso, C.A. Setiawan, A.P., and Santoso, d. Y., (2016), Perancangan meja multifungsi untuk mahasiswa desain interior di apartemen tipe studio [Design of a multifunctional table for interior design students in a studio apartment], Journal Intra, 4(2), 585-597
12. Maldiputra, Y., Honggowidjaja, S. P., and Kattu, G. S. (2018). Perancangan furniture "knockdown" berbasis magnet untuk apartemen tipe studio [Design of magnet-based knockdown furniture for studio apartments]. Intra, 6(2), 792–796.
13. Nugraheny, Fitria Dyah, (2020). Perancangan compact kitchen sebagai produk hemat ruang pada apartemen tipe studio [Designing a compact kitchen as a space-saving product for studio apartments], Skripsi thesis Institut Seni Indonesia Yogyakarta
14. Nur, S. N. B., Hadju, V., and Radjab, M. (2022). Fenomena fertilitas di Indonesia: Dulu, kini, dan nanti [The phenomenon of fertility in Indonesia: Past, present, and future]. Sosio Informa: Kajian Permasalahan Sosial dan Usaha Kesejahteraan Sosial, 8(3).
15. Post, R. A. G., Blijlevens, J., and Hekkert, P. (2016). To preserve unity while almost allowing for chaos: testing the aesthetic principle of unity-in-variety in product design, Acta Psychologica, 163, 142–152. http://dx.doi.org/10.1016/j.actpsy.2015.11.013
16. Prajwalita, B., (2014). Perancangan kitchen set untuk rumah mungil tipe 21 dan 36 [Kitchen set design for compact house type 21 and 36], Jurnal Ilmiah Mahasiswa Universitas Surabaya, vol. 3, no.2
17. Priambodo, C., Purwani, O., and Iswati, T. Y. (2022). Hunian vertikal dan community mall dengan konsep co-living di Kota Tangerang [Vertical housing and community mall with a co-living concept in Tangerang City]. Deepublish. Retrieved July 3, 2025, from https://edeposit.perpusnas.go.id/collection/hunian-vertikal-dan-community-mall-dengan-konsep-co-living-di-kota-tangerang-sumber-elektronis/61923
18. Salsabila, J. A., Putris, S. A., and Zulkarnain, T. (2021). Perancangan lemari pakaian modular untuk meningkatkan efisiensi ruang : studi kasus kamar tidur ukuran 3x3 di Perumahan Taman Raya Tahap 3, Batam) [Modular wardrobe design to increase space eficiency: case study of a 3x3 bedroom in Taman Raya Housing Phase 3, Batam], eProceedings of Art & Design, vol. 8, no. 5
19. Sholahuddin, M., (2019). Desain interior melalui pendekatan kebutuhan pemakai pada hunian terbatas: studi kasus Rusunawa Kali Code Cokrodirjan, Yogyakarta [Interior design based on a user-needs approach for limited-space housing: a case study of the Kali Code Cokrodirjan rental flats, Yogyakarta], Lıntas Ruang: Jurnal Pengetahuan dan Perancangan Desain Interior, vol. 6, no. 2 http://dx.doi.org/10.24821/lintas.v6i2.3060
20. Suresh, Balaji, (2019). Design and fabrication of multifunctional furniture, International Journal of Research in Engineering, Science and Management, 2(5), 442-447, http://dx.doi.org/10.13140/RG.2.2.14859.77609
21. Šimek, M., Haviarová, E., and Eckelman, C., (2018). The end distance effect of knock-down furniture fasteners on bending moment resistance of corner joints, Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis. Vol 26(2), 203-209, http://dx.doi.org/10.11118/actaun200856020203
22. Tilley, A. R., and Henry Dreyfuss Associates. (2002). The measure of man and woman: Human factors in design. John Wiley & Sons.
23. Wardani, N. A., (2014). Desain kitchen set untuk dapur dengan luasan 4 – 5 m² pada bangunan setara rumah tipe 36 [Kitchen set design for a 4–5 m² kitchen in a house comparable to the Type 36 model], Undergraduate thesis, Institut Teknologi Sepuluh Nopember Surabaya.
24. Wibowo, Steven, (2016). Perancangan mebel knockdown yang user-friendly untuk ruang tamu [Design of user-friendly knockdown furniture for the living room], Intra, vol. 4, no. 2, 704-717
25. Yamin, I. S., (2017). Perancangan mebel multifungsi untuk apartemen tipe studio [Design of multifunctional furniture for studio apartments], Intra, vol. 5, no. 2, 168-173.