Araştırma Makalesi

Influences of Cutting Strategies and Parameters on Tool Wear in Threading Operation of 316L Stainless Steel

Cilt: 20 Sayı: 1 19 Mayıs 2022
Makina Tasarım ve İmalat Dergisi Kapak
Makina Tasarım ve İmalat Dergisi
PDF İndir
TR EN

Influences of Cutting Strategies and Parameters on Tool Wear in Threading Operation of 316L Stainless Steel

Öz

External threading is one of the most relevant operations in machining. Despite of the development of new technologies and knowledge including tool geometries in micro scale, and new coating materials and grades, tool wear increases rapidly, and the tool life can be as short as just a few minutes in threading operation of hard-to-cut materials such as stainless steel. Moreover, tool wear influences the workpiece geometrical accuracy and surface quality of the machined specimens. Current work investigates the effects of different cutting strategies and parameters on the tool wear during external threading operation of AISI 316L stainless steel. The wear rate and mechanism have been evaluated on the nose, left and right sides of the cutting edges. The tool wear problem has been evaluated through desirability function optimization method.

Anahtar Kelimeler

Destekleyen Kurum

TUBITAK

Proje Numarası

118C069

Teşekkür

The authors thank TUBITAK (The Scientific and Technological Research Council of Turkey) for partially supporting this work under project number 118C069.

Kaynakça

  1. M. Yasir, T. L. Ginta, B. Ariwahjoedi, A. U. Alkali, M. Danish, Effect of cutting speed and feed rate on surface roughness of AISI 316l ss using end-milling, ARPN Journal of Engineering and Applied Sciences, Vol. 11, No. 4, 2016
  2. Ezugwu, E.O.; Okeke, C.I.; Machado A.R. (1998) High speed threading of inclusion-modified steels with coated carbide tools. Journal of Materials Processing Technology, 86: 216–222.
  3. B. Siqueira, S.A. Freitas, R. B. D. Pereira, C. H. Lauro, L. C. Brandão, Influence of chip breaker and helix angle on cutting efforts in the internal threading process, The International Journal of Advanced Manufacturing Technology, 2019
  4. R. C. E. Júnior, R. B. D. Pereira, C. H. Lauro, L. C. Brandão, Research on the wear mechanisms during the high-speed tapping in 316L stainless steel, The International Journal of Advanced Manufacturing Technology, 2020
  5. Ondin O, Kıvak T, Sarıkaya M, Yıldırım V (2020) Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel. Tribol Int 148:106323
  6. I. C. Pereira, M. B. da Silva, Study of the internal thread process with cut and form taps according to secondary characteristics of the process, Int J Adv Manuf Technol, 2017
  7. H. K. Akyildiz, H. Livatyali, Prediction and experimental analysis of cutting forces during machining of precision external threads, Machining Science and Technology, 2011, 15:485–506
  8. Astakho, V.P. (2004) The assessment of plastic deformatio in metal cutting. Journal of Materials Processing Technology, 146: 193–202.7. H. Kato, S. Nakata, N. Ikenaga, H. Improvement of chip evacuation in drilling of lead-free brass using micro drill, International journal of automation technology, 8; 2014.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Makine Mühendisliği

Bölüm

Araştırma Makalesi

Yazarlar

Yayımlanma Tarihi

19 Mayıs 2022

Gönderilme Tarihi

23 Şubat 2021

Kabul Tarihi

11 Mart 2022

Yayımlandığı Sayı

Yıl 2022 Cilt: 20 Sayı: 1

IZ

https://izlik.org/JA78NP96BW

Kaynak Göster

RIS / Bibtex
APA
Zoghipour, N., Yaratan, A., Çelik, F., & Kaynak, Y. (2022). Influences of Cutting Strategies and Parameters on Tool Wear in Threading Operation of 316L Stainless Steel. Makina Tasarım ve İmalat Dergisi, 20(1), 29-35. https://izlik.org/JA78NP96BW
AMA
1.Zoghipour N, Yaratan A, Çelik F, Kaynak Y. Influences of Cutting Strategies and Parameters on Tool Wear in Threading Operation of 316L Stainless Steel. MATİM. 2022;20(1):29-35. https://izlik.org/JA78NP96BW
Chicago
Zoghipour, Nima, Akif Yaratan, Ferhat Çelik, ve Yusuf Kaynak. 2022. “Influences of Cutting Strategies and Parameters on Tool Wear in Threading Operation of 316L Stainless Steel”. Makina Tasarım ve İmalat Dergisi 20 (1): 29-35. https://izlik.org/JA78NP96BW.
EndNote
Zoghipour N, Yaratan A, Çelik F, Kaynak Y (01 Mayıs 2022) Influences of Cutting Strategies and Parameters on Tool Wear in Threading Operation of 316L Stainless Steel. Makina Tasarım ve İmalat Dergisi 20 1 29–35.
IEEE
[1]N. Zoghipour, A. Yaratan, F. Çelik, ve Y. Kaynak, “Influences of Cutting Strategies and Parameters on Tool Wear in Threading Operation of 316L Stainless Steel”, MATİM, c. 20, sy 1, ss. 29–35, May. 2022, [çevrimiçi]. Erişim adresi: https://izlik.org/JA78NP96BW
ISNAD
Zoghipour, Nima - Yaratan, Akif - Çelik, Ferhat - Kaynak, Yusuf. “Influences of Cutting Strategies and Parameters on Tool Wear in Threading Operation of 316L Stainless Steel”. Makina Tasarım ve İmalat Dergisi 20/1 (01 Mayıs 2022): 29-35. https://izlik.org/JA78NP96BW.
JAMA
1.Zoghipour N, Yaratan A, Çelik F, Kaynak Y. Influences of Cutting Strategies and Parameters on Tool Wear in Threading Operation of 316L Stainless Steel. MATİM. 2022;20:29–35.
MLA
Zoghipour, Nima, vd. “Influences of Cutting Strategies and Parameters on Tool Wear in Threading Operation of 316L Stainless Steel”. Makina Tasarım ve İmalat Dergisi, c. 20, sy 1, Mayıs 2022, ss. 29-35, https://izlik.org/JA78NP96BW.
Vancouver
1.Nima Zoghipour, Akif Yaratan, Ferhat Çelik, Yusuf Kaynak. Influences of Cutting Strategies and Parameters on Tool Wear in Threading Operation of 316L Stainless Steel. MATİM [Internet]. 01 Mayıs 2022;20(1):29-35. Erişim adresi: https://izlik.org/JA78NP96BW