There are many different renewable sources in the world.
Solar energy is one of the most widely used sources. Photovoltaic panels are used
to convert solar energy into electrical energy. The two most important parameters
affecting the efficiency of photovoltaic panels are the panel temperature and the
zenith angle. The effect of these two parameters on panel efficiency was investigated
on an experimental setup established in Konya region. In the study, four equivalent
photovoltaic panels were used. To check the temperature of the panels, chilled water
was passed through the aluminum channels placed on the back surface. As a result
of the data obtained from the experimental test setup, an increase of 11.17% output
power was observed in the cooling panels. It is observed that panels with zenit
angle adjustment produce 7.49% more energy than the fixed panel. Seasonal angle
values were measured with panels positioned differently. As a result of the proper
adjustment of the two parameters, it was determined that the panels we used in the
experimental setup produced 17.47% more energy.
Photovoltaic panels Cooling of panels Zenith angle Electrical efficiency
Dünya üzerinde farklı yenilenebilir enerji kaynakları mevcuttur.
Güneş enerjisi en çok kullanılan kaynaklardan birisidir. Güneş enerjisi elektrik
enerjisine dönüştürmede fotovoltaik paneller kullanılır. Fotovoltaik panellerin
verimini etkileyen faktörlerde en önemli iki parametresi panel sıcaklığı ve zenit
açısının değeridir. Bu iki parametrenin panel verimine olan etkisi Konya bölgesinde
kurulan bir deney düzeneği üzerinde araştırılmıştır. Yapılan çalışmada 4 adet eşdeğer
fotovoltaik panel kullanılmıştır. Panellerin sıcaklığını kontrol etmek için arka
yüzeyine yerleştirilmiş alüminyum kanalcıklardan soğutulmuş su geçirilmiştir. Mevsimlik
açı değerleri ise farklı şekilde konumlandırılmış paneller ile ölçülmüştür. Yapılan
deneysel test düzeneğinden elde edilen veriler sonucunda soğutma yapılan panellerde
% 11,17 çıkış gücünde artış gözlemlenmiştir. Zenit açı ayarı yapılan panellerde
ise sabit panele göre % 7,49 daha fazla enerji ürettiği gözlemlenmiştir. İki parametrenin
uygun şekilde ayarlanması sonucunda deneysel düzenekte kullandığımız panellerde
% 17,47 oranında daha fazla enerji ürettiği tespit edilmiştir.
Fotovoltaik paneller Panellerin soğutulması Elektriksel verimlilik Zenit açısı
Birincil Dil | Türkçe |
---|---|
Bölüm | Makaleler |
Yazarlar | |
Yayımlanma Tarihi | 18 Nisan 2019 |
Kabul Tarihi | 17 Şubat 2019 |
Yayımlandığı Sayı | Yıl 2019 Cilt: 1 Sayı: 1 |