RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI

Soner Sezer; Murat Hiçyılmaz; Hakan Özbaşaran

doi:10.31796/ogummf.1140488

TR EN

RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI

Öz

Elverişsiz mimari formlar ve gelişen teknoloji ile birlikte artan yapısal donanımlar yapıları rüzgâra karşı daha hassas hale getirmektedir. Bu durum önceleri diğer yüklerle birlikte değerlendirilen rüzgâr etkilerinin artık majör etki olarak kabul edildiği “Rüzgâra Dayanıklı Yapı Tasarımı” (RDYT) alanına olan ilgiyi günden güne arttırmaktadır. RDYT metodolojileri oldukça karmaşık optimizasyon problemlerini ortaya çıkarmaktadır. Bu çalışmada RDYT alanında yapılan optimizasyon çalışmalarının incelenmesi amaçlanmıştır. Literatür incelendiğinde konunun aerodinamik şekil optimizasyonu, rüzgâr etkisi altında yapısal optimizasyon ve sönümleyici sistemler ile rüzgâra dayanıklı optimum tasarım olmak üzere üç alt başlıkta incelenebileceği görülmüştür. Bu bağlamda algoritma tabanlı optimizasyon süreci içeren temel ve güncel çalışmalar tespit edilerek incelemeleri sunulmuştur.

Anahtar Kelimeler

Rüzgâr Yükleri , Optimizasyon , Aerodinamik , Yapısal Optimizasyon , Sönümleyici

Kaynakça

Abdelaziz, K. M., Alipour, A., & Hobeck, J. D. (2021). A smart façade system controller for optimized wind-induced vibration mitigation in tall buildings. Journal of Wind Engineering and Industrial Aerodynamics, 212, 104601. doi: https://doi.org/10.1016/j.jweia.2021.104601
Academia. Erişim Adresi: www.academia.edu, ET: 10.12.2021
Alkmim, M. H., Fabro, A. T., & de Morais, M. V. (2018). Optimization of a tuned liquid column damper subject to an arbitrary stochastic wind. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 511. doi: https://doi.org/10.1007/s40430-018-1471-3
Athanasiou, A., Stathopoulos, T., & Tirca, L. (2020). Discussion of “Performance-Based Wind-Resistant Optimization Design for Tall Building Structures” by Ting Deng, Jiyang Fu, Qingxing Zheng, Jiurong Wu, and Yonglin Pi. Journal of Structural Engineering, 146(8), 07020009. doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0002754
Bernardini, E., Spence, S. M., Wei, D., & Kareem, A. (2015). Aerodynamic shape optimization of civil structures: A CFD-enabled Kriging-based approach. Journal of Wind Engineering and Industrial Aerodynamics, 144, 154-164. doi: https://doi.org/10.1016/j.jweia.2015.03.011
Chan, C. M., & Huang, M. F. (2010). Optimal wind resistant performance-based design of tall buildings. Paper presented at the Structures Congress 2010: 19th Analysis and Computation Specialty Conference, Orlando, Florida.
Chan, C. M., Huang, M. F., & Kwok, K. C. (2010). Integrated wind load analysis and stiffness optimization of tall buildings with 3D modes. Engineering Structures, 32(5), 1252-1261. doi: https://doi.org/10.1016/j.engstruct.2010.01.001
Deng, T., Fu, J., Zheng, Q., Wu, J., & Pi, Y. (2019). Performance-based wind-resistant optimization design for tall building structures. Journal of Structural Engineering, 145(10), 04019103. doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0002383
Ding, F., & Kareem, A. (2018). A multi-fidelity shape optimization via surrogate modeling for civil structures. Journal of Wind Engineering and Industrial Aerodynamics, 178, 49-56. doi: https://doi.org/10.1016/j.jweia.2018.04.022
Elshaer, A., Bitsuamlak, G. T., & El Damatty, A. (2016). Aerodynamic shape optimization of tall buildings using twisting and corner modifications. Paper presented at the 8th International Colloquium on Bluff Body Aerodynamics and Applications, Boston, Massachusetts.

Elshaer, A., Bitsuamlak, G., & El Damatty, A. (2015). Aerodynamic shape optimization for corners of tall buildings using CFD. Paper presented at the 14th International conference on wind engineering, Porto Alegre, Brazil.
Foley, C.M. (2002). Recent advances in optimal structural design: Optimized performance-based design for buildings. Washington, DC: ASCE.
Fu, J. Y., Wu, B. G., Wu, J. R., Deng, T., Pi, Y. L., & Xie, Z. N. (2018b). Wind resistant size optimization of geometrically nonlinear lattice structures using a modified optimality criterion method. Engineering Structures, 173, 573-588. doi: https://doi.org/10.1016/j.engstruct.2018.07.017
Fu, J. Y., Wu, B. G., Xu, A., Wu, J. R., & Pi, Y. L. (2018c). A new method for frequency constrained structural optimization of tall buildings under wind loads. The Structural Design of Tall and Special Buildings, 27(18), e1549. doi: https://doi.org/10.1002/tal.1549
Fu, J., Zheng, Q., Huang, Y., Wu, J., Pi, Y., & Liu, Q. (2018a). Design optimization on high-rise buildings considering occupant comfort reliability and joint distribution of wind speed and direction. Engineering Structures, 156, 460-471. doi: https://doi.org/10.1016/j.engstruct.2017.11.041
Gomez, F., Spencer Jr, B. F., & Carrion, J. (2021). Topology optimization of buildings subjected to stochastic wind loads. Probabilistic Engineering Mechanics, 64, 103127. doi: https://doi.org/10.1016/j.probengmech.2021.103127
Google Scholar. Erişim Adresi: scholar.google.com, ET: 10.12.2021
He, E. M., Hu, Y. Q., & Zhang, Y. (2017). Optimization design of tuned mass damper for vibration suppression of a barge-type offshore floating wind turbine. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, 231(1), 302-315. doi: https://doi.org/10.1177/1475090216642466
Huang, M. (2017). High-rise buildings under multi-hazard environment: Performance-based design optimization of wind-excited tall buildings. Singapore: Springer. doi: https://doi.org/10.1007/978-981-10-1744-5_7
Huang, M. F., Chan, C. M., & Lou, W. J. (2012). Optimal performance-based design of wind sensitive tall buildings considering uncertainties. Computers & Structures, 98, 7-16. doi: https://doi.org/10.1016/j.compstruc.2012.01.012
Huang, M. F., Li, Q., Chan, C. M., Lou, W. J., Kwok, K. C., & Li, G. (2015). Performance-based design optimization of tall concrete framed structures subject to wind excitations. Journal of Wind Engineering and Industrial Aerodynamics, 139, 70-81. doi: https://doi.org/10.1016/j.jweia.2015.01.005
Huang, M. F., Tse, K. T., Chan, C. M., & Lou, W. J. (2011). Integrated structural optimization and vibration control for improving wind-induced dynamic performance of tall buildings. International Journal of Structural Stability and Dynamics, 11(06), 1139-1161. doi: https://doi.org/10.1142/S021945541100452X
Jafari, M., & Alipour, A. (2021). Aerodynamic shape optimization of rectangular and elliptical double-skin façades to mitigate wind-induced effects on tall buildings. Journal of Wind Engineering and Industrial Aerodynamics, 213, 104586. doi: https://doi.org/10.1016/j.jweia.2021.104586
Jaouadi, Z., Abbas, T., Morgenthal, G., & Lahmer, T. (2020). Single and multi-objective shape optimization of streamlined bridge decks. Structural and Multidisciplinary Optimization, 61(4), 1495-1514. doi: https://doi.org/10.1007/s00158-019-02431-3
Jin, X., Xie, S., He, J., Lin, Y., Wang, Y., & Wang, N. (2018). Optimization of tuned mass damper parameters for floating wind turbines by using the artificial fish swarm algorithm. Ocean Engineering, 167, 130-141. doi: https://doi.org/10.1016/j.oceaneng.2018.08.031
Kaveh, A., Javadi, S. M., & Moghanni, R. M. (2020). Optimal structural control of tall buildings using tuned mass dampers via chaotic optimization algorithm. Structures, 28, 2704-2713. doi: https://doi.org/10.1016/j.istruc.2020.11.002
Kim, B., Tse, K. T., Chen, Z., & Park, H. S. (2020). Multi-objective optimization of a structural link for a linked tall building system. Journal of Building Engineering, 31, 101382. doi: https://doi.org/10.1016/j.jobe.2020.101382
Li, Q. S., Zou, X. K., Wu, J. R., & Wang, Q. (2011). Integrated wind‐induced response analysis and design optimization of tall steel buildings using Micro‐GA. The Structural Design of Tall and Special Buildings, 20(8), 951-971. doi: https://doi.org/10.1002/tal.569
Li, S., Snaiki, R., & Wu, T. (2021). A knowledge‐enhanced deep reinforcement learning‐based shape optimizer for aerodynamic mitigation of wind‐sensitive structures. Computer‐Aided Civil and Infrastructure Engineering, 36(6), 733-746. doi: https://doi.org/10.1111/mice.12655
Li, Y., & Li, Q. S. (2016). Wind-induced response based optimal design of irregular shaped tall buildings. Journal of Wind Engineering and Industrial Aerodynamics, 155, 197-207. doi: https://doi.org/10.1016/j.jweia.2016.06.001
Li, Y., Duan, R. B., Li, Q. S., Li, Y. G., & Huang, X. (2020). Wind-resistant optimal design of tall buildings based on improved genetic algorithm. Structures, 27, 2182-2191. doi: https://doi.org/10.1016/j.istruc.2020.08.036
Liu, Z., Wang, Y., Hua, X., Zhu, H., & Zhu, Z. (2021). Optimization of wind turbine TMD under real wind distribution countering wake effects using GPU acceleration and machine learning technologies. Journal of Wind Engineering and Industrial Aerodynamics, 208, 104436. doi: https://doi.org/10.1016/j.jweia.2020.104436
Momtaz, A.A., Abdollahian, M.A., & Farshidianfar, A. (2017). Study of wind-induced vibrations in tall buildings with tuned mass dampers taking into account vortices effects. International Journal of Advanced Structural Engineering, 9(4), 385–395. doi: https://doi.org/10.1007/s40091-017-0174-9
Mooneghi, M. A., & Kargarmoakhar, R. (2016). Aerodynamic mitigation and shape optimization of buildings. Journal Of Building Engineering, 6, 225-235. doi: https://doi.org/10.1016/j.jobe.2016.01.009
Park, S., Glade, M., & Lackner, M. A. (2020). Multi-objective optimization of orthogonal TLCDs for reducing fatigue and extreme loads of a floating offshore wind turbine. Engineering Structures, 209, 110260. doi: https://doi.org/10.1016/j.engstruct.2020.110260
Paul, R., & Dalui, S. (2021). Shape optimization to reduce wind pressure on the surfaces of a rectangular building with horizontal limbs. Periodica Polytechnica Civil Engineering, 65(1), 134-149. doi: https://doi.org/10.3311/PPci.16888
Qiu, Y., Yu, R., San, B., & Li, J. (2022). Aerodynamic shape optimization of large-span coal sheds for wind-induced effect mitigation using surrogate models. Engineering Structures, 253, 113818. doi: https://doi.org/10.1016/j.engstruct.2021.113818
Researchgate. Erişim Adresi: www.researchgate.net, ET: 10.12.2021
ScienceDirect. Erişim Adresi: www.sciencedirect.com, ET: 10.12.2021
Shahrouzi, M., Meshkat-Dini, A., & Azizi, A. (2015). Optimal wind resistant design of tall buildings utilizing mine blast algorithm. International Journal Of Optimization in Civil Engineering, 5(2), 137-150. Erişim Adresi: http://ijoce.iust.ac.ir/article-1-204-en.html
Spence, S. M.J., & Gioffrè, M. (2012). Large scale reliability-based design optimization of wind excited tall buildings. Probabilistic Engineering Mechanics, 28, 206-215. doi: https://doi.org/10.1016/j.probengmech.2011.08.001
Subgranon, A., & Spence, S. M. (2021). Performance-based Bi-objective optimization of structural systems subject to stochastic wind excitation. Mechanical Systems and Signal Processing, 160, 107893. doi: https://doi.org/10.1016/j.ymssp.2021.107893
Suthar, S. J., & Jangid, R. S. (2021). Design of tuned liquid sloshing dampers using nonlinear constraint optimization for across-wind response control of benchmark tall building. Structures, 33, 2675-2688. doi: https://doi.org/10.1016/j.istruc.2021.05.059
Tsavdaridis, K. D., Nicolaou, A., Mistry, A. D., & Efthymiou, E. (2020). Topology optimisation of lattice telecommunication tower and performance-based design considering wind and ice loads. Structures, 27, 2379-2399). doi: https://doi.org/10.1016/j.istruc.2020.08.010
Venanzi, I., Ubertini, F., & Materazzi, A. L. (2012). Optimal design of an array of active tuned mass dampers for wind‐exposed high‐rise buildings. Structural Control and Health Monitoring, 20(6), 903-917. doi: https://doi.org/10.1002/stc.1502
Wang, Q., Tian, H., Qiao, H., Tiwari, N. D., & Wang, Q. (2021). Wind-induced vibration control and parametric optimization of connected high-rise buildings with tuned liquid-column-damper–inerter. Engineering Structures, 226, 111352. doi: https://doi.org/10.1016/j.engstruct.2020.111352
Web of Science. Erişim Adresi: www.webofscience.com, ET: 10.12.2021
Whiteman, M. L., Fernández-Cabán, P. L., Phillips, B. M., Masters, F. J., Davis, J. R., & Bridge, J. A. (2021). Cyber-physical aerodynamic shape optimization of a tall building in a wind tunnel using an active fin system. Journal of Wind Engineering and Industrial Aerodynamics, 104835. doi: https://doi.org/10.1016/j.jweia.2021.104835
Xie, J. (2014). Aerodynamic optimization of super-tall buildings and its effectiveness assessment. Journal of Wind Engineering and Industrial Aerodynamics, 130, 88-98. doi: https://doi.org/10.1016/j.jweia.2014.04.004
Xu, A., & Zhao, R. H. (2020). Wind-resistant structural optimization of a supertall building with complex structural system. Structural and Multidisciplinary Optimization, 62(6), 3493-3506. doi: https://doi.org/10.1007/s00158-020-02652-x
Xu, A., Lin, H., Fu, J., & Sun, W. (2021). Wind-resistant structural optimization of supertall buildings based on high-frequency force balance wind tunnel experiment. Engineering Structures, 248, 113247. doi: https://doi.org/10.1016/j.engstruct.2021.113247
Xu, Y., Becker, T. C., & Guo, T. (2021). Design optimization of triple friction pendulums for high-rise buildings considering both seismic and wind loads. Soil Dynamics and Earthquake Engineering, 142, 106568. doi: https://doi.org/10.1016/j.soildyn.2020.106568
Zhang, R., Waibel, C., & Wortmann, T. (2020). Aerodynamic shape optimization for high-rise conceptual design-integrating and validating parametric design, (fast) fluid dynamics, structural analysis and optimization. Design and Computation of Urban and Local Systems, 1, 37-45. doi: https://doi.org/10.52842/conf.ecaade.2020.1.037
Zhao, L., Cui, W., Zhan, Y., Wang, Z., Liang, Y., & Ge, Y. (2020). Optimal structural design searching algorithm for cooling towers based on typical adverse wind load patterns. Thin-Walled Structures, 151, 106740. doi: https://doi.org/10.1016/j.tws.2020.106740
Zhao, X., Guo, J., Ma, H., & Ding, K. (2020). Integrated optimal wind‐resistant design of super‐tall structures with toggle‐brace damper systems. The Structural Design of Tall and Special Buildings, 29(16), e1799. doi: https://doi.org/10.1002/tal.1799
Zhu, Z., Lei, W., Wang, Q., Tiwari, N., & Hazra, B. (2020). Study on wind-induced vibration control of linked high-rise buildings by using TMDI. Journal of Wind Engineering and Industrial Aerodynamics, 205, 104306. doi: https://doi.org/10.1016/j.jweia.2020.104306

Ayrıntılar

Birincil Dil

Türkçe

Konular

İnşaat Mühendisliği

Bölüm

Derleme

Yazarlar

Soner Sezer
0000-0001-8116-3837
Türkiye

Murat Hiçyılmaz
0000-0002-4132-4285
Türkiye

Hakan Özbaşaran ^*
0000-0003-1959-5297
Türkiye

Erken Görünüm Tarihi

22 Aralık 2023

Yayımlanma Tarihi

22 Aralık 2023

Gönderilme Tarihi

4 Temmuz 2022

Kabul Tarihi

4 Nisan 2023

Yayımlandığı Sayı

Yıl 1970 Cilt: 31 Sayı: 4

DOI

https://doi.org/10.31796/ogummf.1140488

IZ

https://izlik.org/JA39NR68XY

APA

Sezer, S., Hiçyılmaz, M., & Özbaşaran, H. (2023). RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, 31(4), 931-954. https://doi.org/10.31796/ogummf.1140488

AMA

1.Sezer S, Hiçyılmaz M, Özbaşaran H. RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI. ESOGÜ Müh Mim Fak Derg. 2023;31(4):931-954. doi:10.31796/ogummf.1140488

Chicago

Sezer, Soner, Murat Hiçyılmaz, ve Hakan Özbaşaran. 2023. “RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI”. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi 31 (4): 931-54. https://doi.org/10.31796/ogummf.1140488.

EndNote

Sezer S, Hiçyılmaz M, Özbaşaran H (01 Aralık 2023) RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi 31 4 931–954.

IEEE

[1]S. Sezer, M. Hiçyılmaz, ve H. Özbaşaran, “RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI”, ESOGÜ Müh Mim Fak Derg, c. 31, sy 4, ss. 931–954, Ara. 2023, doi: 10.31796/ogummf.1140488.

ISNAD

Sezer, Soner - Hiçyılmaz, Murat - Özbaşaran, Hakan. “RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI”. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi 31/4 (01 Aralık 2023): 931-954. https://doi.org/10.31796/ogummf.1140488.

JAMA

1.Sezer S, Hiçyılmaz M, Özbaşaran H. RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI. ESOGÜ Müh Mim Fak Derg. 2023;31:931–954.

MLA

Sezer, Soner, vd. “RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI”. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, c. 31, sy 4, Aralık 2023, ss. 931-54, doi:10.31796/ogummf.1140488.

Vancouver

1.Soner Sezer, Murat Hiçyılmaz, Hakan Özbaşaran. RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI. ESOGÜ Müh Mim Fak Derg. 01 Aralık 2023;31(4):931-54. doi:10.31796/ogummf.1140488

RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI

RÜZGÂRA DAYANIKLI YAPILARIN OPTİMUM TASARIMI

Öz

Anahtar Kelimeler

OPTIMUM DESIGN OF WIND RESISTANT STRUCTURES

Abstract

Keywords

Kaynakça

Ayrıntılar

Birincil Dil

Konular

Bölüm

Yazarlar

Erken Görünüm Tarihi

Yayımlanma Tarihi

Gönderilme Tarihi

Kabul Tarihi

Yayımlandığı Sayı

DOI

IZ

Kaynak Göster