Araştırma Makalesi
BibTex RIS Kaynak Göster

Üç Boyutlu Yazıcı ile Kuğu Boynu Deformitesi için Kişiye Özgü Parmak Ortez Üretimi ve Kullanıcı Memnuniyeti

Yıl 2022, Cilt: 7 Sayı: 3, 340 - 345, 01.09.2022
https://doi.org/10.26453/otjhs.981590

Öz

Amaç: Kuğu boynu deformitesi, proksimal interfalangeal eklemin hiperekstansiyonu, distal interfalangeal eklemin fleksiyonu ile karakterizedir. Tedavi sürecinde, konservatif yöntemlere ek olarak kullanılan ortezlerin çeşitli şekillerde üretimi mevcuttur. Son dönemlerde öne çıkan üç boyutlu (3B) yazıcı teknolojileri ortez üretiminde de kullanılmaktadır. Bu çalışmanın amacı kuğu boynu parmak deformitesi olan kişilere 3B yazıcı kullanarak yüzük ortezi üretmek ve bu kişilerin ortez memnuniyet düzeyini değerlendirmekti.
Materyal ve Metot: Çalışma, kişiye özel ortez üretimi ve katılımcıların kullanım memnuniyetinin değerlendirilmesi olarak iki aşamalı olarak yapılandırıldı. Ortezin tasarım aşamasında bilgisayar destekli modelleme kullanıldı. 3B yazdırma sürecinde erimiş birikimli modelleme yöntemi kullanıldı. Termoplastik malzeme olarak polilaktik-asit tercih edildi. Çalışma 10 gönüllü (7 Erkek, 3 Kadın, yaş ortalaması 55,2±5,31) ile gerçekleştirildi. Katılımcıların ortez kullanım memnuniyetleri Quebec Yardımcı Teknoloji Kullanıcı Memnuniyeti Değerlendirme anketi (Q-YTKMD) ile değerlendirildi.
Bulgular: 3B yazıcı teknolojisi kullanılarak kişiye özel yüzük ortez üretildi. Q-YTKMD anketindeki 8 soru için kaydedilen ortalama puanlar 5 puan üzerinden 4.00 ile 5.00 arasında değişmekteydi. Katılımcıların yardımcı cihaz memnuniyet ortalamalarının 4,57±0,38 olduğu belirlendi. Katılımcıların öne çıkan 3 memnuniyet kriteri ortez ağırlığı, kullanım kolaylığı ve işe yararlılığı olduğu belirlendi.
Sonuç: Çalışma, günümüzde sağlık sektöründe kullanımı giderek artan 3B yazıcılarla kuğu boynu deformitesi için yüksek kullanıcı memnuniyetli, kişiye özel ortezler üretilmesinin mümkün olduğunu ileri sürmektedir.  

Destekleyen Kurum

Tübitak-2238 Girişimcilik ve Yenilikçilik

Proje Numarası

1139B381800272

Teşekkür

-/-

Kaynakça

  • Fox PM, Chang J. Treating the proximal interphalangeal joint in swan neck and boutonniere deformities. Hand Clin. 2018;34(2):167-176. doi:10.1016/j.hcl.2017.12.006
  • Vedel PN, Tranum-Jensen J, Dahlin LB, Brogren E, Søe NH. Deformities of the finger joints. Ugeskr Læger. 2017;179(48):V04170324.
  • Humpl D, Ferry KA, Rawlins LD, Tate K. Splinting, taping, and adaptation. In: Pediatric Hand Therapy. 5th ed. Elsevier. 2020;57-76. doi:10.1016/B978-0-323-53091-0.00005-1
  • Aydın L, Küçük S, Kenar H. Design and construction of a 3d bioprinter for bioprinting of tissues and organs. Proceedings on the Tıp Tekno. 2015;15(1):153-157.
  • Portnoy S, Barmin N, Elimelech M, ve ark. Automated 3D-printed finger orthosis versus manual orthosis preparation by occupational therapy students: Preparation time, product weight, and user satisfaction. Journal of Hand Therapy. 2020;33(2):174-179. doi:10.1016/j.jht.2020.03.022
  • Lunsford C, Grindle G, Salatin B, Dicianno BE. Innovations with 3-dimensional printing in physical medicine and rehabilitation: A review of the literature. PM R. 2016;8(12):1201-1212. doi:10.1016/j.pmrj.2016.07.003
  • Sedlacek F, Lašová V. Additive manufacturing of PA6 with short carbon fibre reinforcement using fused deposition modelling. Trans Tech Publ. 2018;928:26-31. doi:10.4028/www.scientific.net/MSF.928.26
  • Aydin L, Küçük S. Design and construction of ankle foot orthosis by means of three dimensional printers. Journal of Polytechnic. 2017;20(1):1-8 doi:10.2339/2017.20.1
  • Demers L, Weiss-Lambrou R, Ska B. Development of the Quebec user evaluation of satisfaction with assistive technology (QUEST). Assist Technol. 1996;8(1):3-13. doi:10.1080/10400435.1996.10132268
  • Demers L, Monette M, Lapierre Y, Arnold D, Wolfson C. Reliability, validity, and applicability of the Quebec User Evaluation of Satisfaction with assistive Technology (QUEST 2.0) for adults with multiple sclerosis. Disabil. 2002;24(1-3):21-30. doi:10.1080/09638280110066352
  • Yakut Y, Yurt Y, Yagci G, Simsek E. Quebec Yardımcı Teknoloji Kullanıcı Memnuniyeti Değerlendirme 2.0 Anketi’nin protez ve ortez kullanan bireylerde Türkçe adaptasyonu. JETR. 2020;7(3):284-295.
  • Mavroidis C, Ranky RG, Sivak ML, ve ark. Patient specific ankle-foot orthoses using rapid prototyping. J Neuroeng. 2011;8(1):1-11. doi:10.1186/1743-0003-8-1
  • Altunkaynak D. 5 eksen 3 boyutlu yazıcı tasarımı ve uygulaması. Karabük Üniversitesi Endüstriyel Tasarım Mühendisliği Anabilim Dalı, Yüksek Lisans Tezi. Karabük, Türkiye. 2020.
  • Çirak ZD, Yakinci DB. Tıbbi uygulamalarda kullanılan biyouyumlu biyomalzemeler. İnönü Üniversitesi Sağlık Hizmetleri Meslek Yüksek Okulu Dergisi. 2020;8(2):515-526. doi:10.33715/inonusaglik.745301
  • Otepbergenov T, Smagulov Z, Abilgaziyev A, Kurokawa S, Ali MH. Numerical and experimental analysis of the 3D printed multi-material ankle-foot orthosis. J Phys Conf Ser. 2020;1510(1):012012. doi:10.1088/1742-6596/1510/1/012012
  • Baronio G, Volonghi P, Signoroni A. Concept and design of a 3D printed support to assist hand scanning for the realization of customized orthosis. Appl Bionics Biomech. 2017:8171520. doi:10.1155/2017/8171520
  • Palousek D, Rosicky J, Koutny D, Stoklásek P, Navrat T. Pilot study of the wrist orthosis design process. Rapid Prototyp J. 2014;20(1):27-32. doi:10.1108/RPJ-03-2012-0027
  • Marinho FD, Dos Santos PM, Nardi SMT, Sime MM, Coutinho GC. Use of 3D printed orthesis and occupational therapeutic treatment in rhizarthrosis. Braz J Occup Ther. 2020;28(4):1151-1164. doi:10.4322/2526-8910.ctoAO2083

Custom Finger Orthosis Production and User Satisfaction for Swan Neck Deformity with Three-Dimensional Printer

Yıl 2022, Cilt: 7 Sayı: 3, 340 - 345, 01.09.2022
https://doi.org/10.26453/otjhs.981590

Öz

Objective: Swan-Neck deformity is characterized by hyperextension of proximal interphalangeal joint and flexion of distal interphalangeal joint. In the treatment process, in addition to conservative methods, orthoses are produced in various ways. Recently, prominent three-dimensional (3D) printer technologies are also used in orthotics production. The aim of this study was to produce a ring orthosis using a 3D printer for the population with swan neck finger deformity and to evaluate the orthosis satisfaction level of these individuals.
Materials and Methods: The study was structured in two phases as the production of customized orthoses and the evaluation of participants' satisfaction with use. Computer aided design was used in the design phase of orthosis. Fused deposition modeling method was used in 3D-printing process. Polylactic acid was preferred as thermoplastic material. The study was conducted with a total of 10 volunteers (7-males and 3-females mean age:55.2 ± 5.31). User satisfaction was evaluated with the Quebec Assistive Technology User Satisfaction Assessment Questionnaire (Q-YTKMD).
Results: Custom ring orthoses were produced using 3D printer technology. The average scores recorded for the 8 questions in the Q-YTKMD questionnaire ranged from 4.00 to 5.00 out of 5 points. The participants’ mean assistive device satisfaction score was 4,57±0,38. Orthosis weight, ease of use and usefulness were the 3 prominent satisfaction criteria of the participants.
Conclusion: The study suggests that it is possible to produce customized orthoses with high user satisfaction for swan neck deformity with 3D printers, which are increasingly used in the healthcare industry today.

Proje Numarası

1139B381800272

Kaynakça

  • Fox PM, Chang J. Treating the proximal interphalangeal joint in swan neck and boutonniere deformities. Hand Clin. 2018;34(2):167-176. doi:10.1016/j.hcl.2017.12.006
  • Vedel PN, Tranum-Jensen J, Dahlin LB, Brogren E, Søe NH. Deformities of the finger joints. Ugeskr Læger. 2017;179(48):V04170324.
  • Humpl D, Ferry KA, Rawlins LD, Tate K. Splinting, taping, and adaptation. In: Pediatric Hand Therapy. 5th ed. Elsevier. 2020;57-76. doi:10.1016/B978-0-323-53091-0.00005-1
  • Aydın L, Küçük S, Kenar H. Design and construction of a 3d bioprinter for bioprinting of tissues and organs. Proceedings on the Tıp Tekno. 2015;15(1):153-157.
  • Portnoy S, Barmin N, Elimelech M, ve ark. Automated 3D-printed finger orthosis versus manual orthosis preparation by occupational therapy students: Preparation time, product weight, and user satisfaction. Journal of Hand Therapy. 2020;33(2):174-179. doi:10.1016/j.jht.2020.03.022
  • Lunsford C, Grindle G, Salatin B, Dicianno BE. Innovations with 3-dimensional printing in physical medicine and rehabilitation: A review of the literature. PM R. 2016;8(12):1201-1212. doi:10.1016/j.pmrj.2016.07.003
  • Sedlacek F, Lašová V. Additive manufacturing of PA6 with short carbon fibre reinforcement using fused deposition modelling. Trans Tech Publ. 2018;928:26-31. doi:10.4028/www.scientific.net/MSF.928.26
  • Aydin L, Küçük S. Design and construction of ankle foot orthosis by means of three dimensional printers. Journal of Polytechnic. 2017;20(1):1-8 doi:10.2339/2017.20.1
  • Demers L, Weiss-Lambrou R, Ska B. Development of the Quebec user evaluation of satisfaction with assistive technology (QUEST). Assist Technol. 1996;8(1):3-13. doi:10.1080/10400435.1996.10132268
  • Demers L, Monette M, Lapierre Y, Arnold D, Wolfson C. Reliability, validity, and applicability of the Quebec User Evaluation of Satisfaction with assistive Technology (QUEST 2.0) for adults with multiple sclerosis. Disabil. 2002;24(1-3):21-30. doi:10.1080/09638280110066352
  • Yakut Y, Yurt Y, Yagci G, Simsek E. Quebec Yardımcı Teknoloji Kullanıcı Memnuniyeti Değerlendirme 2.0 Anketi’nin protez ve ortez kullanan bireylerde Türkçe adaptasyonu. JETR. 2020;7(3):284-295.
  • Mavroidis C, Ranky RG, Sivak ML, ve ark. Patient specific ankle-foot orthoses using rapid prototyping. J Neuroeng. 2011;8(1):1-11. doi:10.1186/1743-0003-8-1
  • Altunkaynak D. 5 eksen 3 boyutlu yazıcı tasarımı ve uygulaması. Karabük Üniversitesi Endüstriyel Tasarım Mühendisliği Anabilim Dalı, Yüksek Lisans Tezi. Karabük, Türkiye. 2020.
  • Çirak ZD, Yakinci DB. Tıbbi uygulamalarda kullanılan biyouyumlu biyomalzemeler. İnönü Üniversitesi Sağlık Hizmetleri Meslek Yüksek Okulu Dergisi. 2020;8(2):515-526. doi:10.33715/inonusaglik.745301
  • Otepbergenov T, Smagulov Z, Abilgaziyev A, Kurokawa S, Ali MH. Numerical and experimental analysis of the 3D printed multi-material ankle-foot orthosis. J Phys Conf Ser. 2020;1510(1):012012. doi:10.1088/1742-6596/1510/1/012012
  • Baronio G, Volonghi P, Signoroni A. Concept and design of a 3D printed support to assist hand scanning for the realization of customized orthosis. Appl Bionics Biomech. 2017:8171520. doi:10.1155/2017/8171520
  • Palousek D, Rosicky J, Koutny D, Stoklásek P, Navrat T. Pilot study of the wrist orthosis design process. Rapid Prototyp J. 2014;20(1):27-32. doi:10.1108/RPJ-03-2012-0027
  • Marinho FD, Dos Santos PM, Nardi SMT, Sime MM, Coutinho GC. Use of 3D printed orthesis and occupational therapeutic treatment in rhizarthrosis. Braz J Occup Ther. 2020;28(4):1151-1164. doi:10.4322/2526-8910.ctoAO2083
Toplam 18 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular Sağlık Kurumları Yönetimi
Bölüm Araştırma Makalesi
Yazarlar

Eren Timurtaş 0000-0001-9033-4327

Gazi Akgün 0000-0002-8154-5883

Ender Ersin Avcı 0000-0002-8089-0351

Neslihan Karabacak 0000-0003-1177-7926

Gökçe Kartal 0000-0002-2024-4104

Mine Gülden Polat 0000-0002-9705-9740

İlkşan Demirbüken 0000-0003-0566-5784

Proje Numarası 1139B381800272
Erken Görünüm Tarihi 29 Ağustos 2022
Yayımlanma Tarihi 1 Eylül 2022
Gönderilme Tarihi 11 Ağustos 2021
Kabul Tarihi 13 Haziran 2022
Yayımlandığı Sayı Yıl 2022 Cilt: 7 Sayı: 3

Kaynak Göster

AMA Timurtaş E, Akgün G, Avcı EE, Karabacak N, Kartal G, Polat MG, Demirbüken İ. Üç Boyutlu Yazıcı ile Kuğu Boynu Deformitesi için Kişiye Özgü Parmak Ortez Üretimi ve Kullanıcı Memnuniyeti. OTSBD. Eylül 2022;7(3):340-345. doi:10.26453/otjhs.981590

Creative Commons Lisansı

Online Türk Sağlık Bilimleri Dergisi Creative Commons Atıf-GayriTicari 4.0 Uluslararası Lisansı ile lisanslanmıştır.


Makale gönderme süreçleri ve "Telif Hakkı Devir Formu" hakkında yardım almak için tıklayınız.