Loss Calculation Technique With Randomize Load Curves
Öz
Calculating feeder losses accurately is an important part of evaluating designs for electric power distribution systems. Historically,
these losses have been calculated one of three ways: (1) using a peak load calculation and the load factor method, (2) using customer
class statistics normalized for a month, season, or year, or (3) using customer class statistics together with feeder measurements to
reflect the variation in load every hour of the year. The first two methods require far less data but provide far less accuracy than
the third method. In this paper, the authors present a method of calculating losses that achieves better accuracy than the first two
methods without the large data requirements of the third method.
Anahtar Kelimeler
Kaynakça
- [1] Y. Liang, K. S. Tam, R. Broadwater, “Load Calibration and Model Validation Methodologies for Power Distribution Systems”, IEEE Transactions on Power Systems, 25(3): 1393-1401, (2010).
- [2] L.R. Feinauer, K.J.Russell, R. Broadwater, “Graph Trace Analysis and Generic Algorithms for Interdependent Reconfigurable System Design and Control“, Naval Engineers Journal, 120(1): (2008).
- [3] D.L. Kleppinger, K.J. Russell, and R. Broadwater, “Graph trace analysis based shipboard HM&E system priority management and recovery analysis,’’ IEEE Electric Ship Technologies Symposium, 109–114, (2007).
- [4] R. Broadwater, A. Sargent, A. Yarali, H. Shaalan, Jo Nazarko “Estimating Substation Peaks From Load Research Data” IEEE Transactions on Power Delivery, 12(1): 451-456, (1997).
- [5] A. Sargent, R. P. Broadwater, J. Thompson, J. Nazarko, “Estimation of Diversity and KWHR-to-Peak-KW Factors from Load Research Data,” IEEE Transactions on Power Systems, 9(3): 1450-1456, (1994).
- [6] D. Han ; J. Ma, H. Ren-mu, Z. Dong, “A Real Application of Measurement-Based Load Modeling in Large-Scale Power Grids and its Validation” IEEE Transactions on Power Systems, 24(4): 1756-1764, (2009).
- [7] M. Dilek, Francisco de Leon, R. Broadwater, “A Robust Multi-phase Power Flow for General Distribution Networks,” IEEE Transactions on Power Systems, 99: 1-9, (2009) .
- [8] J.A Jardini, C.M.V. Tahan, S.U Ahn, E.L. Ferrari, “Distribution transformer loading evaluation based on load profiles measurements, IEEE Transactions on Power Systems, 12(4): 1766-1770, (1997).
Ayrıntılar
Birincil Dil
İngilizce
Konular
Mühendislik
Bölüm
Araştırma Makalesi
Yazarlar
Yayımlanma Tarihi
1 Mart 2017
Gönderilme Tarihi
24 Temmuz 2016
Kabul Tarihi
-
Yayımlandığı Sayı
Yıl 2017 Cilt: 20 Sayı: 1