Yıl 2020, Cilt 23 , Sayı 2, Sayfalar 497 - 503 2020-06-01

Diffusion Welding of Al-α-Si3N4 Composite Materials
Diffusion Welding of Al-α-Si3N4 Composite Materials

Halil ARIK [1] , İbrahim Okan ERDEN [2] , Mustafa AYDIN [3]


ABSTRACT

In this study, Al-a-Si3N4 composite, produced by powder metallurgy method, were joined at 2.5 MPa pressure with various welding temperatures (620, 630, and 640 °C ) and durations (1,1.5, and 2 h.) by diffusion welding method. Optical microscopy examination was carried out from welded interfaces and shear tests were also conducted to the sample interfaces to find out the effect of welding parameters and amount of α-Si3N4 reinforcement on the weldability properties of composite materials. The test results show that increase in the welding temperature and duration resulted in increase shear resistance of the welded zone. Results indicated that optimum parameters (welding temperatures, durations and amount of α-Si3N4 are 640°C, 2 h., and 15wt % respectively) MMCs produced in this study could be joined by diffusion welding technique successfully with the 97.5 % strength of base material.

ABSTRACT

In this study, Al-a-Si3N4 composite, produced by powder metallurgy method, were joined at 2.5 MPa pressure with various welding temperatures (620, 630, and 640 °C ) and durations (1,1.5, and 2 h.) by diffusion welding method. Optical microscopy examination was carried out from welded interfaces and shear tests were also conducted to the sample interfaces to find out the effect of welding parameters and amount of α-Si3N4 reinforcement on the weldability properties of composite materials. The test results show that increase in the welding temperature and duration resulted in increase shear resistance of the welded zone. Results indicated that optimum parameters (welding temperatures, durations and amount of α-Si3N4 are 640°C, 2 h., and 15wt % respectively) MMCs produced in this study could be joined by diffusion welding technique successfully with the 97.5 % strength of base material.

  • REFERENCES[1] Ozan S., Karaoglu S., Ipek R., “Examination of diffusion welding capabilities of particle-reinforced aluminum-based metal matrix composites”, Engineer and Machine, 53: 45-53, (2012).[2] Arık H., Sandal R., “Investigation regarding Al-Al2O3 composite material production and its weldability to aluminium by diffusion welding”, GU J Sci, Part A, 4 (4): 101-111, (2017).[3] Arik H., “Production and characterization of in situ Al4C3 reinforced aluminium-based composite produced by mechanical alloying technique”, Materials & Design, 25: 31- 40, (2004).[4] Mahajan G. V., Aher V. S., “Composite material: A review over current development and automotive application”, International Journal of Scientific and Research Publications, 2 (11): 1-5, (2012).[5] Mollaoglu Altuner H., “Diffusion bonding of particle reinforced aluminum–based metal matrix composites”, Phd. Thesis, Yildiz Technical University, Institute of Sciences, (2011). [6] Akbulut H., “Production and investigation of microstructure-properties of Al2O3 fibrous reinforced Al-Si based composite”, Phd. Thesis, Istanbul Technical University, Institute of Science and Technology, (1994).[7] Ben R. C., Mirchandani P. K., “New materials by mechanical alloying techniques”, Editors: Arzt E, and Schultz C, Colw-Hirson (FRG) 1988.[8] Zhang X. P., Ye L., Mai W., “Investigation on diffusion bonding characteristics of SiC particulate reinforced aluminum metal matrix composites”, Composites Applied Science and Manufacturing Part A, 30: 1415-1421, (1999).[9] Arık H., Turker M, Saritas S., “Investigation of mechanical properties of in situ Al4C3 reinforced aluminium based composites by mechanical alloying technique”, Powder Metallurgy World Congress and Exhibition, Kyoto, 543-549, (2000).[10] Singer R. F., Oliver W. C., Nix W. D., “Identification of dispersoid phases created in aluminum during mechanical alloying”, Metallurgical Transactions A, 11A: 1895-1901, (1980).[11] Ellis B. D., “Joining of aluminum based metal matrix composites”, International Materials Reviews, 41: 41-58, (1996).[12] Zhang X. P., Quan G. F., Wei W., “Preliminary investigation on joining performance of SiCp reinforced aluminum metal matrix composite (Al/SiC-MMC) by vacuum brazing”, Composites, Applied Science and Manufacturing Part A, 30: 823-827, (1999).[13] Huang Y., Ridley N., Humphreys F. J., “Diffusion bonding of superplastic 7075 aluminium alloy”, Materials Science And Engineering A, 266: 295-302, (1999).[14] Dunkerton S. B., “Diffusion bonding – an overview, diffusion bonding 2, Stephenson, D.J, Elsevier Applied Science, New York: 1-11, (1991).[15] Luo J.G., Acoff V. L., “Interfacial reactions of titanium and aluminum during diffusion welding”, Welding Research Supplement to the welding Journal, 239-243, (2000).[16] Dunkerton S.B., “Solid– state processes for dissimilar metal welding”, The Welding Institute Research Bulletin: 388, (1982).[17] Calvo F.A., Urena A., Gomez S., “Solid state transformations during diffusion bonding of cooper to iron”, Journal of Materials Science, 23: 1231-1236, (1988).[18] Aydın M., Gurler R., Turker M., “The diffusion welding of 7075Al-3% SiC particles reinforced composites”, Strength and Plasticity, 207: 219-224, (2009). [19] Liming L., Meili Z., Longxiu P., “Studing of micro-bonding in diffusion welding joint for composite”, Materials Science and Engineering A, 315: 103-107, (2001).[20] Qiaofang F., Yanchuan Y., Ming W., “Research on key welding technologies of aluminum matrix composite”, International Conference on Materials Science and Biological Engineering (ICMSBE 2017), 14-17, (2017).[21] Elßner M., Weis S., Grund T., at. al., “Microstructure of arc brazed and diffusion bonded joints of stainless steel and SiC reinforced aluminum matrix composite”, Materials Science and Engineering, 118: 1-11, (2016).[22] Arık H., Aydın M., Kurt A., at. ol. “Weldability of Al4C3-Al composites via diffusion welding technique”, Materials & Design, 26: 550-560, (2005). [23] Kurt A., Uygur I., and Hakan, A., “Effects of temperature on the weldability of powder metal parts joined by diffusion welding”, Materials Science Form, 546: 667-670, (2007). [24] Kucukkara H., Acarer M., Ahlatcı H., and Turen Y., “The investigation of the diffusion welding capability of the Al-SiC composites produced through powder metallurgy method”, V. International advanced technologies symposium (IATS’9) Karabuk, 13-15 Mayıs, (2009).[25] Akca E., Gursel A., “The effect of diffusion welding parameters on the mechanical properties of titanium alloy and aluminum couples”, Metals, 7(1), 22, 1-11, (2017).[26] Aydın K., Kaya Y., Kahraman N., “Experimental study of diffusion welding/bonding of titanium to copper”, Materials & Design, 37: 356-368, (2012).
Birincil Dil en
Konular Mühendislik
Bölüm Araştırma Makalesi
Yazarlar

Orcid: 0000-0001-6521-7399
Yazar: Halil ARIK (Sorumlu Yazar)
Kurum: GAZI UNIVERSITY, FACULTY OF TECHNOLOGY
Ülke: Turkey


Yazar: İbrahim Okan ERDEN
Kurum: GAZİ ÜNİVERSİTESİ
Ülke: Turkey


Yazar: Mustafa AYDIN
Kurum: CELAL BAYAR UNIVERSITY
Ülke: Turkey


Tarihler

Yayımlanma Tarihi : 1 Haziran 2020

Bibtex @araştırma makalesi { politeknik524988, journal = {Politeknik Dergisi}, issn = {}, eissn = {2147-9429}, address = {Gazi Üniversitesi Teknoloji Fakültesi 06500 Teknikokullar - ANKARA}, publisher = {Gazi Üniversitesi}, year = {2020}, volume = {23}, pages = {497 - 503}, doi = {10.2339/politeknik.524988}, title = {Diffusion Welding of Al-α-Si3N4 Composite Materials}, key = {cite}, author = {ARIK, Halil and ERDEN, İbrahim Okan and AYDIN, Mustafa} }
APA ARIK, H , ERDEN, İ , AYDIN, M . (2020). Diffusion Welding of Al-α-Si3N4 Composite Materials. Politeknik Dergisi , 23 (2) , 497-503 . DOI: 10.2339/politeknik.524988
MLA ARIK, H , ERDEN, İ , AYDIN, M . "Diffusion Welding of Al-α-Si3N4 Composite Materials". Politeknik Dergisi 23 (2020 ): 497-503 <https://dergipark.org.tr/tr/pub/politeknik/issue/53587/524988>
Chicago ARIK, H , ERDEN, İ , AYDIN, M . "Diffusion Welding of Al-α-Si3N4 Composite Materials". Politeknik Dergisi 23 (2020 ): 497-503
RIS TY - JOUR T1 - Diffusion Welding of Al-α-Si3N4 Composite Materials AU - Halil ARIK , İbrahim Okan ERDEN , Mustafa AYDIN Y1 - 2020 PY - 2020 N1 - doi: 10.2339/politeknik.524988 DO - 10.2339/politeknik.524988 T2 - Politeknik Dergisi JF - Journal JO - JOR SP - 497 EP - 503 VL - 23 IS - 2 SN - -2147-9429 M3 - doi: 10.2339/politeknik.524988 UR - https://doi.org/10.2339/politeknik.524988 Y2 - 2020 ER -
EndNote %0 Politeknik Dergisi Diffusion Welding of Al-α-Si3N4 Composite Materials %A Halil ARIK , İbrahim Okan ERDEN , Mustafa AYDIN %T Diffusion Welding of Al-α-Si3N4 Composite Materials %D 2020 %J Politeknik Dergisi %P -2147-9429 %V 23 %N 2 %R doi: 10.2339/politeknik.524988 %U 10.2339/politeknik.524988
ISNAD ARIK, Halil , ERDEN, İbrahim Okan , AYDIN, Mustafa . "Diffusion Welding of Al-α-Si3N4 Composite Materials". Politeknik Dergisi 23 / 2 (Haziran 2020): 497-503 . https://doi.org/10.2339/politeknik.524988
AMA ARIK H , ERDEN İ , AYDIN M . Diffusion Welding of Al-α-Si3N4 Composite Materials. Politeknik Dergisi. 2020; 23(2): 497-503.
Vancouver ARIK H , ERDEN İ , AYDIN M . Diffusion Welding of Al-α-Si3N4 Composite Materials. Politeknik Dergisi. 2020; 23(2): 503-497.