Corrosion Adsorption Mild steel Inhibitor Quantum calculation
Mardin Artuklu Üniversitesi
Mardin Artuklu Üniversitesine teşekkür ederim.
The aim of this study is the investigation of adsorption and corrosion behaviors of 2,4-Diamino-6-methly-1,3,5-triazine (2-DMT) on mild steel (MS) in 0.5 M HCI solution using many experimental and theoretical studies such as potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), linear polarization resistance (LPR), adsorption isotherm, potential of zero charge (PZC), scanning electron (SEM), atomic force microscopies (AFM) and quantum chemical calculations. The results showed that 2-DMT has an outstanding anti-corrosion performance of 94.6% at an optimum concentration of 10 mM and the MS surface, which was exposed to the inhibited solution at 298 K, does not contain pits, cracks or deformations. Values of icorr are found to be 0.51, 0.22, 0.098, 0.072 and 0.039 mA cm-2 for blank solution and each concentration of 2-DMT. Hydrogen volumes are 90 and 4.6 mL cm-2 for blank solution and the existence of 10.0 mM 2-DMT, respectively. The observed adsorption is much more consistent with Langmuir. The high performance is explained by the effective adsorbing of organic matter to the MS surface. HOMO, LUMO energies and the energy gap (∆E) are -7.1980, -1.9959 and 5.2021 eV, respectively. Accordingly, it is suggested that this organic compound can be used in the industrial acid cleaning procedure.
Corrosion Adsorption Mild steel Inhibitor Quantum chemical calculation
Birincil Dil | İngilizce |
---|---|
Konular | Mühendislik |
Bölüm | Makaleler |
Yazarlar | |
Yayımlanma Tarihi | 27 Mart 2023 |
Yayımlandığı Sayı | Yıl 2023 |
Bu eser Creative Commons Atıf-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır.