TRANSFER VE KABARTMA BASKININ ŞENİL KUMAŞLARIN AŞINMA DİRENCİ VE YAPISAL ÖZELLİKLERİNE ETKİSİ

Öz

Yüzey görünümünü iyileştirmek amacıyla tekstil sektöründe yaygın olarak kullanılan transfer ve kabartma baskı işlemleri, bu çalışmada estetik ve haslık performanslarının ötesinde kumaşların fiziksel ve yapısal özellikleri üzerindeki potansiyel etkileri açısından incelenmiştir. Bu kapsamda, iki farklı hav yüksekliğine sahip polyester şenil kumaşlara uygulanan farklı endüstriyel bitim işlemlerinin kumaş kalınlığı, uzama davranışı ve aşınma direnci üzerindeki etkileri incelenmiştir. Ramöz işlemi ile birlikte transfer ve kabartma baskının ardışık olarak uygulandığı bitim rotaların etkileri değerlendirilmiştir. Sonuçlar, bitim işlemlerinin kumaş kalınlığını etkileyen önemli bir faktör olduğunu ve ramöz sonrası transfer ve kabartma baskı uygulamalarının kalınlığını azalttığı ve aşınma dayanımını iyileştirdiğini göstermiştir. Uzama değerleri tüm kumaşlarda %10’un altında olup, tek yönlü varyans analizi (ANOVA) bitim işleminin boyutsal davranış üzerinde anlamlı, şenil iplik tipinin ise anlamsız etkisini doğrulamıştır. Aşınma direnci analizleri de benzer şekilde bitim işleminin önemli rolünü ortaya koymuştur. Genel olarak elde edilen bulgular, şenil kumaşlarda transfer ve kabartma baskının yapısal etkilerine ilişkin önemli bilgiler sunmakta olup, işlem optimizasyonu ve malzeme seçimi açısından pratik katkılar sağlarken, benzer kumaşların endüstriyel tasarımı ve uygulamaları için referans niteliğindedir.

Anahtar Kelimeler

• Transfer baskı
• Kabartma baskı
• Şenil kumaşlar
• Aşınma dayanımı
• Uzama
• Kalınlık

EFFECT OF TRANSFER AND EMBOSS PRINTING ON ABRASION RESISTANCE AND STRUCTURAL PROPERTIES OF CHENILLE FABRICS

Öz

Transfer and emboss printing processes, widely used in the textile industry to improve surface appearance, were examined in this study not only for their aesthetic and fastness features but also for their potential influence on the physical and structural properties of fabrics. Within this scope, the effects of different industrial finishing processes applied to polyester chenille fabrics with two different pile heights on fabric thickness, elongation behavior, and abrasion resistance were investigated. Finishing routes consisting of stentering followed by sequential transfer and emboss printing were applied to evaluate their effects. Results showed that the finishing process was important factor on fabric thickness, and the application of transfer and emboss printing after stentering decreased thickness while improving abrasion performance. Elongation values remained below 10% in all fabrics, and one-way analysis of variance (ANOVA) confirmed that the finishing process had a significant effect on dimensional stability, whereas chenille yarn type had an insignificant effect. Abrasion resistance analyses similarly highlighted the significant role of the finishing process. Overall, the findings provide valuable insight into the structural effects of transfer and emboss printing on chenille fabrics and offer practical guidance for process optimization and material selection, while serving as a reference for the industrial design and applications of similar fabrics.

Anahtar Kelimeler

• Transfer printing
• Emboss printing
• Chenille fabrics
• Abrasion resistance
• Elongation
• Thickness

Kaynakça

1. İlhan ÖZEN, Şule S. UĞUR, A. Merih SARIIŞIK (2018). Transfer Printing of Layer-by-Layer TiO2 and ZnO Deposited 100% Cotton Fabrics With Disperse Dyes, Tekstil ve Mühendis, 25: 109, 37-43., https://doi.org/10.7216/1300759920182510905
2. Hyeok-Jin Kim, Jin-Pyo Hong, Dong-Sup Kwak, Dong-Jun Kwon (2021). Acrylic polymer treatment on Nylon fibers improves color strength and durability in thermal transfer printing, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Volume 615, , 126268, ISSN 0927-7757, https://doi.org/10.1016/j.colsurfa.2021.126268
3. Repeta, V., Petriv, Y., & Kukura, Y. (2025). Optimization and forecasting models of the sublimation printing process on textile materials. Journal of Print and Media Technology Research, 13(4), 189–197, DOI:10.14622/JPMTR-2413
4. Adel, A.M., Ahmed, N.M., Diab, M.A. et al. (2023). Exploration on ability of printable modified papers for the application in heat sublimation transfer printing of polyester fabric. Sci Rep 13, 6536 . https://doi.org/10.1038/s41598-023-33546-9
5. Elshemy, N.S., EL-Sayad, H.S., Abd El-Rahman, A.A. et al. (2019). Optimization and Characterization of Prepared Nano-Disperse Dyes via a Sonication Process and Their Application in Textile Dyeing and Printing. Fibers Polym 20, 2540–2549 https://doi.org/10.1007/s12221-019-9135-1
6. Toshikj, E., & Prangoski, B. (2023). Textile Sublimation Printing: Impact of Total Ink Limiting Level and Sublimation Transfer Paper on Black Print Quality. Textile and Apparel, 33(4), 366-374. https://doi.org/10.32710/tekstilvekonfeksiyon.1145260
7. Sarkodie B, Tawiah B, Agbo C, Wizi J. Status and Development of Transfer Printing in Textiles—A Review. (2018). AATCC Journal of Research.;5(2):1-18. doi:10.14504/ajr.5.2.1
8. Stojanović, S., Geršak, J., & Trajković, D. (2021). Compression properties of knitted fabrics printed by sublimation transfer printing technique. Advanced Technologies, 10(1) (2021) 46-53, DOI: 10.5937/savteh2101046S

9. Stojanović, Sandra & Gersak, Jelka & Trajkovic, Dusan & Ćirković, Nenad. (2020). Influence of sublimation transfer printing on alterations in the structural and physical properties of knitted fabrics. Coloration Technology. DOI:10.1111/cote.12508
10. Yousef, Marina & Othman, Hanan & Hassabo, Ahmed. (2021). A Recent Study for Printing Polyester Fabric with Different Techniques. Journal of Textiles, Coloration and Polymer Science. DOI: 10.21608/jtcps.2021.84754.1072
11. Gunter, D. S., & Perkins, B. F. (2007). The Mechanics of Calendering and Embossing Cotton Webs.
12. Ahmed, M., Mehrin, S., Alam, S. S., & Hassan, M. N. (2019). A comparative study of using different types of print paste in screen printing. International Journal of Advanced Engineering and Technology, ISSN: 2456-7655
13. Savić, Luka & Ludaš Dujmić, Anja & Ražić, Sanja. (2025). 3D printed thermoplastic polymer screen for textile printing. Koža & obuća. 74. 16-20. DOI: 10.34187/ko.74.1.4
14. Martens, Yasmin & Ehrmann, Andrea. (2017). Composites of 3D-Printed Polymers and Textile Fabrics. IOP Conference Series Materials Science and Engineering. 225. 012292. DOI: 10.1088/1757-899X/225/1/012292
15. Iskandar, I., Arsana, I. M., Pambudi, R. G., Nugroho, Y. S., & Syahputra, M. F. D. (2023). Automatic shoe embossing machine integrated with real-time data cloud system to improve SMEs footwear productivity. In E3S Web of Conferences (Vol. 450, p. 02004). EDP Sciences, https://doi.org/10.1051/e3sconf/202345002004
16. Osman BABAARSLAN, Abdurrahman TELLİ (2013). A Study on Usage of Chenille Yarn in Denim Fabric Production, Tekstil ve Mühendis, 20: 92, 1-10., http://dx.doi.org/10.7216/130075992013209201
17. Kavusturan, Yasemin & Çeven, Erhan & Ozdemir, Özcan. (2010). Effect of Chenille Yarns Produced with Selected Comfort Fibres on the Abrasion and Bending Properties of Knitted Fabrics. Fibres and Textiles in Eastern Europe. 78
18. Özdemir Ö, Çeven EK. Influence of Chenille Yarn Manufacturing Parameters on Yarn and Upholstery Fabric Abrasion Resistance. Textile Research Journal. 2004;74(6):515-520. doi:10.1177/004051750407400609
19. Ulku, S. & Turksoy, Huseyin. (2003). The Effect of Chenille Yarn Properties on the Abrasion Resistance of Upholstery Fabrics. Fibres and Textiles in Eastern Europe. 11.
20. O. Babaarslan & I. Ilhan (2005). An experimental study on the effect of pile length on the abrasion resistance of chenille fabric, The Journal of The Textile Institute, 96:3, 193-197, http://dx.doi.org/10.1533/joti.2004.0079
21. Tekoğlu, O., & Kavuşturan, Y. (2011). Abrasion resistance and tensile strength of chenille and macaroni upholstery fabrics. Textile and Apparel, 21(4), 336-342.
22. Şener, A., Koç, D. D., Yılmaz, K. Tosunoğlu, E. (2022). Chenille Yarn Production Parameters Improvement Studies and Evaluation of Their Effects. Çukurova Üniversitesi Mühendislik Fakültesi Dergisi, 37(4), 1047-1060. https://doi.org/10.21605/cukurovaumfd.1230939
23. Yağız, A. (2025). Effect of different finishing processes on abrasion resistance of upholstery fabrics produced from polyester and acrylic chenille yarns. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 28(4), 2056-2069. https://doi.org/10.17780/ksujes.1769848
24. Belkıs Zervent Ünal, Birgül Kartal & Sait Yılönü (2019). The effect of water repellency finishing on selected performance properties of upholstery fabrics produced from chenille yarns, The Journal of The Textile Institute, DOI: 10.1080/00405000.2019.1694352
25. Yağız, A., & Usta, İ. (2025). Development of Multifunctional Textile Surface with Electromagnetic Shielding Effectiveness, Water and Oil Repellency and Flame Retardancy Features. Textile and Apparel, 35(1), 19-30.
26. Esi, B., & Duru Baykal, P. (2022). Optimization of the Yarn Slippage at the Seam in Chenille Upholstery Fabrics Including Recycled and Virgin Polyester Yarns. Textile and Apparel, 32(1), 1-8. https://doi.org/10.32710/tekstilvekonfeksiyon.928820
27. Abdulkadir Yağiz (2025). Improving pilling resistance in upholstery fabrics with novel boucle yarns, The Journal of The Textile Institute, https://doi.org/10.1080/00405000.2025.2553369
28. Shahid, Mohammad & Yusuf, Mohd & Biranje, Santosh & Adivarekar, Ravindra. (2025). Advancements in Textile Finishing: Techniques, Technologies, and Trends. https://doi.org/10.1007/978-981-96-6385-9
29. Omerogullari Basyigit, Z. (2021). Application Technologies for Functional Finishing of Textile Materials. In Textiles for Functional Applications. IntechOpen. https://doi.org/10.5772/intechopen.95956
30. Akin, M., Aydin, T., & Pala Avci, N. (2025). Enhancing elasticity properties through finishing processes and different wool fabric designs. Journal of Textile Science and Technology, 11(2), 45–56. https://doi.org/10.4236/jtst.2025.112004
31. Zupin, Ž., Dimitrovski, K., Hladnik, A., & Kostajnsek, K. (2022). Elongation properties of woven fabrics with incorporated PBT yarns. Journal of the Textile Institute, 113(5), 846–856. https://doi.org/10.1080/00405000.2021.1907971