Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet

Abstract

Variation of the groove size depending on the laser power has been modeled in this proposed mathematical model. It is obtained by polymerization of Polyoxymethylene formaldehyde, a semi-crystalline polymer, and is among the hardest and strongest thermoplastics. Polyoxymethylene can be used in slip friction pairs without lubrication. Polyoxymethylene materials are widely used for materials in tribological applications. They also show good friction properties.

Keywords

• mathematical modeling
• Polyoxmethylene
• Fourier method
• Laser ablation
• Surface texturing

Kaynakça

1. Reference1 M.H. Cho, S. Park, Micro CNC surface texturing on polyoxymethylene (POM) and its tribological performance in lubricated sliding, Tribology International, 2011, 44: 859-867.
2. Reference2 V. Belaud, S. Valette, G. Stremsdoerfer, B. Beaugıraud, E. Audouard, And S. Benayoun, Femtosecond Laser Ablation of Polypropylene: A Statistical Approach of Morphological Data, Scanning 2014, Vol. 36, 209–217
3. Reference3 S. Lazare, J. Lopez, F. Weisbuch, High-aspect-ratio microdrilling in olymericmaterials with intense KrF laser radiation, Appl. Phys. 1999, A 69 [Suppl.], S1–S6
4. Reference4 S. Lazare And V. Tokarev, Recent Experimental and Theoretical Advances in Microdrilling of Polymers with Ultraviolet Laser Beams, Fifth International Symposium on Laser Precision Microfabrication, Proceedings of SPIE 2004, Vol. 5662, 221-231.
5. Reference5 T. Canel, A.U. Kaya, B. Çelik, Parameter optimization of nanosecond laser for microdrilling on PVC by Taguchi method, Optics & Laser Technology, 2012, 44; 2347-2353
6. Reference6 T. Canel, E. Kayahan, L. Candan, S. Fidan, T. Sınmazçelik, Influence of laser parameters in surface texturing of polyphenylene sulfide composites, J. Appl. Polym. Scı. 2019, Doi: 10.1002/App.47976
7. Reference7 T. Canel, M. Zeren, T. Sınmazcelik, Laser parameters optimization of surface treating of Al 6082-T6 with Taguchi method, Optics & Laser Technology, 2019, 120; 105714
8. Reference8 T. Canel, İ. Bağlan, T. Sinmazcelik, Mathematical modelling of laser ablation of random oriented short glass fiber reinforced Polyphenylene sulphide (PPS) polymer composite. Optics & Laser Technology, 2019, 115; 481-486

9. Reference9 T. Canel, İ. Bağlan, T. Sınmazçelik, Mathematical modeling of heat distribution on carbon fiber Poly(etherether-ketone) (PEEK) composite during laser ablation, Optics & Laser Technology, 2020, 127; 106190
10. Reference10 T. Canel, İ. Bağlan, Mathematical Modelling of One Dimensional Temperature Distribution As A Function Of Laser Intensity On Carbon Fiber Reinforced Poly(Ether-Ether-Ketone)-(Peek) Composite, TWMS J. App. and Eng. Math. 2020, V.10, N.3, pp. 769-777