Reference1
M.H. Cho, S. Park, Micro CNC surface texturing on polyoxymethylene (POM) and its tribological performance in lubricated sliding, Tribology International, 2011, 44: 859-867.
Reference2
V. Belaud, S. Valette, G. Stremsdoerfer, B. Beaugıraud, E. Audouard, And S. Benayoun, Femtosecond Laser Ablation of Polypropylene: A Statistical Approach of Morphological Data, Scanning 2014, Vol. 36, 209–217
Reference3
S. Lazare, J. Lopez, F. Weisbuch, High-aspect-ratio microdrilling in olymericmaterials with intense KrF laser radiation, Appl. Phys. 1999, A 69 [Suppl.], S1–S6
Reference4
S. Lazare And V. Tokarev, Recent Experimental and Theoretical Advances in Microdrilling of Polymers with Ultraviolet Laser Beams, Fifth International Symposium on Laser Precision Microfabrication, Proceedings of SPIE 2004, Vol. 5662, 221-231.
Reference5
T. Canel, A.U. Kaya, B. Çelik, Parameter optimization of nanosecond laser for microdrilling on PVC by Taguchi method, Optics & Laser Technology, 2012, 44; 2347-2353
Reference6
T. Canel, E. Kayahan, L. Candan, S. Fidan, T. Sınmazçelik, Influence of laser parameters in surface texturing of polyphenylene sulfide composites, J. Appl. Polym. Scı. 2019, Doi: 10.1002/App.47976
Reference7
T. Canel, M. Zeren, T. Sınmazcelik, Laser parameters optimization of surface treating of Al 6082-T6 with Taguchi method, Optics & Laser Technology, 2019, 120; 105714
Reference8
T. Canel, İ. Bağlan, T. Sinmazcelik, Mathematical modelling of laser ablation of random oriented short glass fiber reinforced Polyphenylene sulphide (PPS) polymer composite. Optics & Laser Technology, 2019, 115; 481-486
Reference9
T. Canel, İ. Bağlan, T. Sınmazçelik, Mathematical modeling of heat distribution on carbon fiber Poly(etherether-ketone) (PEEK) composite during laser ablation, Optics & Laser Technology, 2020, 127; 106190
Reference10
T. Canel, İ. Bağlan, Mathematical Modelling of One Dimensional Temperature Distribution As A Function Of Laser Intensity On Carbon Fiber Reinforced Poly(Ether-Ether-Ketone)-(Peek) Composite, TWMS J. App. and Eng. Math. 2020, V.10, N.3, pp. 769-777
Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet
Variation of the groove size depending on the laser power has been modeled in this proposed
mathematical model. It is obtained by polymerization of Polyoxymethylene formaldehyde, a semi-crystalline
polymer, and is among the hardest and strongest thermoplastics. Polyoxymethylene can be used in slip friction
pairs without lubrication. Polyoxymethylene materials are widely used for materials in tribological
applications. They also show good friction properties.
Reference1
M.H. Cho, S. Park, Micro CNC surface texturing on polyoxymethylene (POM) and its tribological performance in lubricated sliding, Tribology International, 2011, 44: 859-867.
Reference2
V. Belaud, S. Valette, G. Stremsdoerfer, B. Beaugıraud, E. Audouard, And S. Benayoun, Femtosecond Laser Ablation of Polypropylene: A Statistical Approach of Morphological Data, Scanning 2014, Vol. 36, 209–217
Reference3
S. Lazare, J. Lopez, F. Weisbuch, High-aspect-ratio microdrilling in olymericmaterials with intense KrF laser radiation, Appl. Phys. 1999, A 69 [Suppl.], S1–S6
Reference4
S. Lazare And V. Tokarev, Recent Experimental and Theoretical Advances in Microdrilling of Polymers with Ultraviolet Laser Beams, Fifth International Symposium on Laser Precision Microfabrication, Proceedings of SPIE 2004, Vol. 5662, 221-231.
Reference5
T. Canel, A.U. Kaya, B. Çelik, Parameter optimization of nanosecond laser for microdrilling on PVC by Taguchi method, Optics & Laser Technology, 2012, 44; 2347-2353
Reference6
T. Canel, E. Kayahan, L. Candan, S. Fidan, T. Sınmazçelik, Influence of laser parameters in surface texturing of polyphenylene sulfide composites, J. Appl. Polym. Scı. 2019, Doi: 10.1002/App.47976
Reference7
T. Canel, M. Zeren, T. Sınmazcelik, Laser parameters optimization of surface treating of Al 6082-T6 with Taguchi method, Optics & Laser Technology, 2019, 120; 105714
Reference8
T. Canel, İ. Bağlan, T. Sinmazcelik, Mathematical modelling of laser ablation of random oriented short glass fiber reinforced Polyphenylene sulphide (PPS) polymer composite. Optics & Laser Technology, 2019, 115; 481-486
Reference9
T. Canel, İ. Bağlan, T. Sınmazçelik, Mathematical modeling of heat distribution on carbon fiber Poly(etherether-ketone) (PEEK) composite during laser ablation, Optics & Laser Technology, 2020, 127; 106190
Reference10
T. Canel, İ. Bağlan, Mathematical Modelling of One Dimensional Temperature Distribution As A Function Of Laser Intensity On Carbon Fiber Reinforced Poly(Ether-Ether-Ketone)-(Peek) Composite, TWMS J. App. and Eng. Math. 2020, V.10, N.3, pp. 769-777
Canel, T., & Bağlan, İ. (2020). Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet. Turkish Journal of Science, 5(3), 252-256.
AMA
Canel T, Bağlan İ. Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet. TJOS. Aralık 2020;5(3):252-256.
Chicago
Canel, Timur, ve İrem Bağlan. “Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet”. Turkish Journal of Science 5, sy. 3 (Aralık 2020): 252-56.
EndNote
Canel T, Bağlan İ (01 Aralık 2020) Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet. Turkish Journal of Science 5 3 252–256.
IEEE
T. Canel ve İ. Bağlan, “Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet”, TJOS, c. 5, sy. 3, ss. 252–256, 2020.
ISNAD
Canel, Timur - Bağlan, İrem. “Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet”. Turkish Journal of Science 5/3 (Aralık 2020), 252-256.
JAMA
Canel T, Bağlan İ. Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet. TJOS. 2020;5:252–256.
MLA
Canel, Timur ve İrem Bağlan. “Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet”. Turkish Journal of Science, c. 5, sy. 3, 2020, ss. 252-6.
Vancouver
Canel T, Bağlan İ. Mathematical Modeling of the Effect of CO2 Laser Power on Texture Size on Polyoxmethylene (POM) Sheet. TJOS. 2020;5(3):252-6.