Kitting-Based Design of the In-plant Logistics Processes

Öz

Lean logistics aims elimination of the non-value adding material handling and storage processes both within the plants and among the supplier and customer companies, based on lean thinking. In this context, the required parts must be delivered effectively and systematically to the assembly stations, as much as required and just-in time. However, due to the increase in the uncommon parts variety, and erratic product demands, some new approaches of parts distribution to the assembly lines is strongly required. Kitting or kit-delivery is one of these new approaches. In this study, it is aimed to develop a parts delivery methodology based on kitting and hence to plan and manage in-plant parts distribution processes, effectively. In addition, based on a real case study, the proposed methodology is explained. The unique aspect of this study is that an integrated methodology that considers all stages of parts delivery based on kitting is proposed, and the developed methodology can be applied to many industrial sectors. 

Anahtar Kelimeler

• In-plant logistics,integrated kitting-based parts feeding system,assembly lines

FABRİKA İÇİ LOJİSTİK SÜREÇLERİNİN SET YAPMA ESASLI TASARIMI VE BİR UYGULAMA

Öz

Yalın lojistik, yalın düşünce çerçevesinde, gerek fabrika içi, gerekse müşteri-tedarikçi firmalar arası katma değeri olmayan malzeme taşıma ve depolama süreçlerinin ortadan kaldırılmasını amaçlar. Bu kapsamda, üretim içinde montaj istasyonlarına gerekli olan parçaların ihtiyaç duyulan miktarda, tam zamanında, sistematik ve etkin bir biçimde beslenmesi gerekmektedir. Ancak ürünlerin farklı modellerinde ortak olmayan parça çeşitliliğinin artması, ürün taleplerinin değişken hale gelmesi gibi nedenlerle montaj hatlarına malzeme besleme konusunda yenilikçi yaklaşımlar izlenmesine ihtiyaç duyulmuştur. Set halinde teslimat bu tür yenilikçi bir fabrika içi malzeme besleme yaklaşımıdır. Bu çalışmada, montaj hatlarına set yapma esaslı malzeme beslemeye yönelik bir metodoloji geliştirilmesi ve böylece fabrika içi lojistik süreçlerinin etkin bir şekilde planlanmasını ve yönetilmesini sağlamak amaçlanmıştır. Ayrıca gerçek bir uygulama örneği ile önerilen metodoloji açıklanmıştır. Makalenin özgün yönü, set yapma temelli malzeme beslemeye yönelik tüm aşamaları içeren, bütünsel bir yaklaşım geliştirilmesi ve metodolojinin birçok endüstri dalında uygulanabilecek nitelikte olmasıdır. 

Anahtar Kelimeler

• Üretim Lojistiği,Yalın Lojistik,Set Yapma

Kaynakça

1. Baudin, M. (2005) Lean logistics: the nuts and bolts of delivering materials and goods, CRC Press.
2. Bedworth, D. D., Bailey, J. (1987). Integrated production control systems, analysis, design. John Wiley & Sons, 370–374.
3. Boudella, M. E. A., Sahin, E., Dallery, Y. (2018). Kitting optimisation in Just-in-Time mixed-model assembly lines: assigning parts to pickrs in a hybrid robot–operator kitting system, International Journal of Production Research, 56(16), 5475-5494. doi:10.1080/00207543.2017.1418988
4. Boysen, N., Emde, S., Hoeck, M., Kauderer, M. (2015) Part logistics in the automotive industry: Decision problems, literature review and research agenda, European Journal of Operational Research, 242(1), 107-120. doi:10.1016/j.ejor.2014.09.065
5. Bozer, Y. A., McGinnis, L.F. (1992) Kitting versus line stocking: A conceptual framework and a descriptive model, International Journal of Production Economics, 28, 1-19. doi:10.1016/0925-5273(92)90109-K
6. Caputo, A.C., Pelagagge, P.M., Salini, P. (2016) Selection of assembly lines feeding policies based on parts features, IFAC-PapersOnLine, 49(12), 185-190. doi:10.1016/j.ifacol.2016.07.593
7. Caputo, A. C., Pelagagge, P. M., Salini, P. (2018) Selection of assembly lines feeding policies based on parts features and scenario conditions, International Journal of Production Research, 56(3), 1208-1232. doi:10.1080/00207543.2017.1407882.
8. Carlson, J.G., Yao, A.C., Girouard, W.F. (1994) The role of master kits in assembly operations, International Journal of Production Economics, 35, 253-258. doi:10.1016/0925-5273(94)90089-2

9. Carlson, O., Hensvold, B, (2008) Kitting in a high variation assembly line. A case study at Caterpillar BCP-E, Master Thesis. Lulea University of Technology.
10. Choobineh, F., Mohebbi, E. (2004) Material planning for production kits under uncertainty, Production Planning and Control, 13(1), 63-70. doi:10.1080/09537280310001659164
11. Çorakçı, M.A. (2008) An evaluation of kitting systems in lean production. Yüksek Lisans Tezi, University of Boras, School of Engineering, Boras.
12. Faccio, M. (2014) The impact of production mix variations and models varieties on the parts-feeding policy selection in a JIT assembly system, International Journal of Advanced Manufacturing Technology, 72, 543-560. doi:10.1007/s00170-014-5675-0
13. Gecü, B. (2008), İç lojistik sistemlerinin yalın üretim bakış açısıyla yeniden tasarlanması ve otomotiv sektöründe örnek bir uygulama, Istanbul Teknik Üniversitesi, Yüksek Lisans Tezi.
14. Günther, H.O., Gronalt, M., and Piller, F. (1996) Component kitting in semi-automated printed circuit board assembly, International Journal of Production Economics, 43, 213-226. doi:10.1016/0925-5273(96)00044-8
15. Hanson, R., Brolin, A. (2013) A comparison of kitting and continuous supply in in-plant materials supply, International Journal of Production Research, 51(4), 979-992. doi:10.1080/00207543.2012.657806.
16. Hua, S.Y., Johnson, D. (2010) Research issues on factors influencing the choice of kitting versus line stocking, International Journal of Production Research, 48(3), 779-800. doi:10.1080/00207540802456802
17. Hua, W., Zhou, C. (2008) Clusters and filling-curve-based storage assignment in a circuit board assembly kitting area, IIE Transactions, 40(6), 569-585. doi:10.1080/07408170701503462
18. Karadayı, S., Öksuz, M.K., Durmuşoğlu, M.B. (2017) Design methodology for a hybrid part feeding system in lean-based assembly lines, Assembly Automation, 37(1), 84-102. doi:10.1108/AA-09-2016-114
19. Kılıç, H.S., Durmuşoğlu, M.B. (2012) Design of kitting system in lean‐based assembly lines, Assembly Automation, 32(3), 226-234. doi:10.1108/01445151211244357
20. Limère, V., Van Landeghem, H., Goetschalckx, M. (2015) A decision model for kitting and line stocking with variable operator walking distances, Assembly Automation, 35(1), 47-56. doi:10.1108/AA-05-2014-043
21. Loveland, L.J., Monkman, S.K., and Morrice, D.J. (2007) Dell uses a new production-scheduling algorithm to accommodate increased product variety, Interfaces, 37(3), 209-219. doi:10.1287/inte.1060.0264
22. Medbo, L. (2003) Assembly work execution and materials kit functionality in parallel flow assembly systems, International Journal of Industrial Ergonomics, 31, 263-281. doi:10.1016/S0169-8141(02)00220-2
23. Ramachandran, S., Delen, D. (2005) Performance analysis of a kitting process in stochastic assembly systems, Computers & Operations Research, 32(4), 449-463. doi:10.1016/S0169-8141(02)00220-2
24. Ramakrishnan, R., Krishnamurthy, A., (2008) Analytical approximations for kitting systems with multiple inputs, Asia-Pacific Journal of Operations Research, 25(2), 187-216. doi:10.1142/S0217595908001742
25. Sali, M., Şahin, E., Patchong, A. (2015) An empirical assessment of the performances of three line feeding modes used in the automotive sector: line stocking vs. kitting vs. sequencing, International Journal of Production Research, 53(5), 1439-1459. doi:10.1080/00207543.2014.944630
26. Satoğlu, Ş. I., Şahin, I. E. (2013) Design of a just-in-time periodic material supply system for the assembly lines and an application in electronics industry, International Journal of Advanced Manufacturing Technology, 65(1-4), 319-332. doi:10.1007/s00170-012-4171-7
27. Satoğlu, Ş. I., Uçan, K. (2015, Mart). Redesigning the material supply system of the automotive suppliers based on lean principles and an application. In Industrial Engineering and Operations Management (IEOM), 2015, International Conference on (1-6). IEEE. doi:10.1109/IEOM.2015.7093860
28. Sellers, C.J., Nof, Y., (1989) Performance analysis of robotic kitting systems, Robotics and Computer-Integrated Manufacturing, 6(1),15-24. doi:10.1016/0736-5845(89)90081-1
29. Sol, E. (2010), Set Şeklinde Teslimat İle Hat Kenarı Besleme Sisteminin Karşılaştırılması, Yalın Lojistik Bakış Açısıyla İç Lojistik Faaliyetlerin Tasarlanması Ve Örnek Bir Uygulama, Istanbul Teknik Üniversitesi, Yüksek Lisans Tezi.