Investigation the Effects of Fabric Ply Numbers to the Sewing Needle Penetration Force

Yıl 2013, Cilt: 18 Sayı: 1, 51 - 59, 01.04.2013

Ayça Gürarda Binnaz Kaplangiray Pınar Koncer

Öz

In this study, it is aimed to investigate the effects of fabric ply numbers to the seam performance specially sewing needle penetration forces. Therefore, four fabric samples having different specifications were obtained and these fabrics were sewn with one, two, three and four plies. Sewing needle penetration forces were determined for these fabric plies. At the end of the study, it has been shown that at fabric seams when fabric ply number increased, sewing needle penetration forces also increased and fabric yarns were damaged more quickly by the needle which have high penetration force

Anahtar Kelimeler

Sewing needle, sewing needle penetration force, fabric ply number

Kumaş Kat Sayısının İğne Batış Kuvvetine Etkisinin İncelenmesi

Öz

Bu çalışmada dikiş işlemi sırasında kumaş kat sayılarının dikiş performansına özellikle iğne batış kuvvetine etkisinin incelenmesi hedeflenmiştir. Bu amaçla farklı özellikte kumaş numuneleri seçilmiş ve bu kumaşlar tek, iki, üç ve dört kat dikilmiştir. Bu kumaş katları için iğne batış kuvveti belirlenmiştir. Bu araştırma sonucunda, kumaştaki dikişlerde kumaş kat sayısı arttıkça iğne batış kuvvetinin de arttığı ve kumaştaki ipliklerin yüksek iğne batış kuvvetli iğne tarafından daha çabuk hasarlandığı görülmüştür

Anahtar Kelimeler

Dikiş iğnesi, iğne batış kuvveti, kumaş kat sayısı

Kaynakça

• Baytar, F. (2002). Analysis of needle penetration forces in lockstitch sewing process, MSc Thesis,İTÜ, Textile Engineering Department, İstanbul.
• Carr, H., Latham, B. (1998). The Technology of Clothing Manufacture, Blackwell Science Oxford,13-35.
• Carvalho, H., Rocha, A.M., Monteiro, J.L. (2009). Measurement and analysis of needle penetration forces in imdustrial high- speed sewing machine, The Journal of Textile Institute, 100(4), 319-329.
• Catchpole, J.I., Sarhadi, M. (1991). Stitch quality monitoring in sewing operations, Textile Objective Measurement and Automation in Garment Manufacture, George Stylios, Ellis Harwood, New York ,229-250.
• Domjanic, Z., Katovic, D., Ujevic, D. (2010/2011). Sewing protective clothing, TSCR Competition ,Seventh framework programme.
• Dorrity, J.L., Olson, L.H. (1996). Thread motion ratio used to monitor sewing machines, International Journal of Clothing Science and Technology,8,1/2, 24-32.
• Fan, J., Leeuwner, W. (1998). The performance of sewing threads with respect to seam appearance, Journal of Textile Instıtute, 89(1),142-151.
• Gotlih, K., Zunic, L.D. (1997). The relation between the viscoelastic properties of the thread and sewing needle penetration force, The 78th World Conference of the Textile Instıtutein association with the 5th Textile Symposium of Seve and Sephe,Greece,133-147.
• Gurarda, A. (2008). Investigation of the seam performance of PET/Nylon-elastane woven fabrics,Textile Research Journal, 78(1),21-27.
• Gurarda, A., Meric, B. (2005). Sewing needle penetration forces and elastane fiber damage during the sewing of cotton/elastane woven fabrics, Textile Research Journal, 75(8), 628- 633.
• Rudin, A., Truevtzev, N., Lomov, S. (1996). Predicting model for needle penetration of a woven fabric, Fibres & Textiles in Eastern Europe, 7(2), 32-34.
• Stjepanovic, Z., Strah, H. (1998). Selection of suitable sewing needle using machine learning techniques, International Journal of Clothing Science and Technology, 10,3/4,209-218.
• Stylios, G., Xu, Y.M. (1995). An investigation of the penetration force profile of the sewing machine needle point, The Journal of Textile Institute,86,1, 148-162.
• Makale 07.06.2012 tarihinde alınmış, 05.11.2012 tarihinde düzeltilmiş, 09.11.2012 tarihinde kabul edilmiştir.