Volume: 10 Issue: 2, 3/22/24

Year: 2024

Articles

Research Article

1. Numerical investigation of an amalgamation of two phase change materials thermal energy storage system

Pankaj R. Gharde Sanjay N. Havaldar

Page : 263-272

Research Article

2. Thermal stress analysis in pin fin microchannel heat sink

Mohammad Nazirul Syafiqaiman Janı Nawaf Saeid

Page : 273-285

Research Article

3. Performance evaluation of hybrid nanofluid-filled cylindrical heat pipe by machine learning algorithms

K. Kumararaja B. Sıvaraman S. Saravanan

Page : 286-298

Research Article

4. Evaluation of the thermal efficiency of nanofluid flows in flat plate solar collector

Adnan M. Husseın Afrah Turki Awad Hussein Hayder Mohammed Alı

Page : 299-307

Research Article

5. Towards the use of natural thermal insulation on the exterior of vertical building walls in desert regions: A case study in the city of Bechar, Algeria

Slimane Zıad Imane Benoudjafer Ibtissam Benoudjafer

Page : 308-320

Research Article

6. Comparative evaluation of experimental ejector refrigeration system for different operating configurations

Batuhan Üğüdür Mehmet Direk

Page : 321-329

Research Article

7. MHD boundary layer micropolar fluid flow over a stretching wedge surface: Thermophoresis and brownian motion effect

Umme Hanı Mohammad Alı Mohammad Shah Alam

Page : 330-349

Research Article

8. Numerical analysis of turbulent flow and heat transfer enhancement using V-shaped grooves mounted on the rotary kiln’s outer walls

Youcef Attou Mohamed Bouhafs Abdelkader Feddal

Page : 350-359

Research Article

9. Enhancement in thermal and electrical characteristics of solar photovoltaic module through a direct contact water jacketed cooling system

Deepak Kumar Sharma Manish K. Rathod Purnanand V. Bhale

Page : 360-374

Research Article

10. Enhancement in air-cooling of lithium-ion battery packs using tapered airflow duct

Vivek K. Satheesh Navneet Krıshna Prakhar Singh Kushwah Ishan Garg Sharmista Raı Gurumoorthy S. Hebbar Dileep V. Naır

Page : 375-385

Research Article

11. Temperature and salt concentration behavior of a compact rectangular salinity gradient solar pond

Sathish D Selvaraj Jegadheeswaran Murugan Veeramanıkandan Seepana Praveenkumar Raja Thırunavukkarasu

Page : 386-395

Research Article

12. Study on exhaust gas recirculation diesel engine using karanja oil methyl ester with low heat rejection in direct injection

Ravisankar Rajendran V.s.k. Venkatachalapathy K. Velmurugan M. Elangovan P. Balu

Page : 396-403

Research Article

13. Thermal and dynamic characterization of a multi-jet system with different geometry diffusers

Naas Zahout Mohamed Braikia Ali Khelil Hassane Naji

Page : 404-429

Research Article

14. Experimental and numerical study for assessment indoor air quality by adopting mixing ventilation with different occupants' density in Iraq hot climates

Atheer Hmaizah Sabr Alaa Abbas Mahdi Mohammed Wahhab Aljibory

Page : 430-446

Research Article

15. Influences of iso-amyl nitrate oxygenated additive on mahua methyl ester/diesel blends thermal stability and crdi engine performance characteristics

Putha Prasad Kumar Srinivas Pendyala S. K. Gugulothu

Page : 447-456

Research Article

16. Principal parameters of thermoelectric generator module design for effective industrial waste heat recovery

Wan Ahmad Najmi Wan Mohamed Nur Faranini Zamri Muhammad Fairuz Remeli

Page : 457-478

Research Article

17. Experimental investigation of axial finned tube evaporator thermal distillation system using for diesel engine waste heat recovery process

Satyendra Kumar Prakash Chandra

Page : 479-489

Research Article

18. Convective thermal losses of long-term underground hot water storage

Milan Rashevski Slavtcho Slavtchev

Page : 490-502

Reviews

Review

19. Growth in turbine size and technological development of modern commercial large scale wind turbines in Türkiye

Mehmet Bilgili Hakan Alphan Arif Emre Aktaş

Page : 503-516

Review

20. Recent developments in thermal management of light-emitting diodes (LEDS): A review

Ashish Khudaiwala Rupesh L. Patel Rakesh Bumataria

Page : 517-540

Aim and Vision: Journal of Thermal Enginering is aimed at giving a recognized platform to students, researchers, research scholars, teachers, authors and other professionals in the field of research in Thermal Engineering subjects, to publish their original and current research work to a wide, international audience.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Type of Publications: Research, Review, Short communications, Technical notes, Letters, Editorials, Case reports, Lecture notes, Keynote speeches, Conference extended papers, Book reviews etc., Please contact us for any other types.

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering


http://eds.yildiz.edu.tr/journal-of-thermal-engineering/ForAuthors

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering



Free.

Download Cover Image

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering