Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi

Berk Ercoşkun

doi:10.31466/kfbd.1704909

TR EN

Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi

Abstract

Otomotiv endüstrisinin, özellikle elektrikli araçların yükselişiyle birlikte hızla evrilmesi, güvenilir ve hassas kalite kontrol sistemlerine olan ihtiyacı artırmıştır. Bu çalışma, katodik elektro-kaplama süreci sırasında tork bütünlüğü ve elektriksel iletkenliğin korunabilmesi amacıyla boyasız kalması gereken batarya taşıyıcı cıvatalarının denetimine odaklanmaktadır. Konvansiyonel denetim yöntemleri, genellikle konik aynalı sistemlere dayanmakta olup, alt diş bölgelerinde sınırlı görüş alanı ve kaplama özelliklerindeki değişkenlik nedeniyle cıvata yüzeyindeki boya hatalarını tespit etmede yetersiz kalmaktadır. Bu sınırlamaları aşmak amacıyla, robot destekli bir kamera, düz ayna konfigürasyonu ve lazer tabanlı konumlandırmayı içeren yeni bir denetim sistemi geliştirilmiştir. Söz konusu sistem, mekanik çarpışma riski olmadan 360 derecelik görüntüleme sağlamakta ve gerekli tüm eksenlerde hassas hizalama olanağı sunmaktadır. Geliştirilen sistem, kaplama hataları simüle edilmiş M6 ve M8 cıvatalar üzerinde test edilmiştir. Boyanmış alanların (parlaklık < 60) ve boyanmamış yüzeylerin (parlaklık 60–120) ayrımında parlaklık temelli analiz yöntemi kullanılmıştır. İlk sonuçlar, farklı cıvata boyutlarında tespit tutarlılığının arttığını göstermiştir. Ancak sistemin dayanıklılığının doğrulanması için farklı üretim koşullarında ilave testlere ihtiyaç duyulmaktadır. Elde edilen bulgular, batarya taşıyıcı montajlarında ve benzeri yüksek hassasiyet gerektiren otomotiv uygulamalarında görsel denetimin otomatikleştirilmesi adına umut vadeden bir yaklaşımı ortaya koymaktadır.

Keywords

Otomotiv endüstrisi, Batarya taşıyıcı, Kamera sistemi, İnsan-makine etkileşimi, Boya tespiti, Kalite kontrol

Improvement of the Paint Error Detection Process on Part Screws in a Battery Carrier Final Inspection System

Abstract

The rapid evolution of the automotive industry, particularly with the emergence of electric vehicles, has increased the demand for reliable and precise quality control systems. The present study addresses the inspection of bolts used in battery carrier components that must remain uncoated during the cathodic electro-coating process to preserve torque integrity and electrical conductivity. Conventional inspection methods employing conical mirror systems often fall short in detecting paint defects across the entire bolt surface, especially due to limited visibility of lower threads and the variability in coating characteristics. To address these limitations, a novel inspection system incorporating a robot-guided camera, a flat mirror configuration, and laser-based positioning was developed. This configuration enables 360-degree imaging without mechanical interference and allows precise alignment in all necessary axes. The system was tested on M6 and M8 bolts with simulated coating defects. A brightness-based analysis was used to differentiate between painted areas (brightness < 60) and unpainted surfaces (brightness between 60 and 120). Initial results demonstrated improved detection consistency across varying bolt sizes. Although the system showed enhanced capability in identifying coating anomalies, further validation under different production conditions is necessary to confirm its robustness. These findings indicate a promising direction for the automation of visual inspection in battery carrier assemblies and other high-precision applications in the automotive sector.

Keywords

Automotive industry, Battery carrier, Camera system, Human-machine interaction, Paint detection, Quality control

References

Akafuah, N. K., Poozesh, S., Salaimeh, A., Patrick, G., Lawler, K., ve Saito, K. (2016). Evolution of the automotive body coating process – A review. Coatings, 6(2), 24. https://doi.org/10.3390/coatings6020024
Ali, M., Mailah, M., Tang, H. H., ve Kazi, S. (2012). Visual inspection of cylindrical product's lateral surface using cameras and image processing. International Journal of Mathematical Models and Methods in Applied Sciences, 6, 340-348.
Besra L., ve Liu, M. (2007). A review on fundamentals and applications of electrophoretic deposition (EPD). Progress in Materials Science, 52, 1-61. https://doi.org/10.1016/j.pmatsci.2006.07.001
Bessant, J., ve Caffyn, S. (1997). High-involvement innovation through continuous improvement. International Journal of Technology Management, 14. https://doi.org/10.1504/IJTM.1997.001705
Bračun, D., ve Lekše, I. (2019). A visual inspection system for KTL coatings. Procedia CIRP, 81, 771-774. https://doi.org/10.1016/j.procir.2019.03.192
Burggräf, P., Wagner, J., Heinbach, B., Steinberg, F., Pérez M., A. R., Schmallenbach, L., Garcke, J., Steffes-lai, D., ve Wolter, M. (2021). Predictive analytics in quality assurance for assembly processes: Lessons learned from a case study at an industry 4.0 demonstration cell. Procedia CIRP, 104, 641-646. https://doi.org/10.36227/techrxiv.14113715.v1
Chen, W., Liu, H., Tang, Y., ve Liu, J. (2017). Trajectory optimization of electrostatic spray painting robots on curved surface. Coatings, 7(10), 155. https://doi.org/10.3390/coatings7100155
Chen, Y., Kang, Y., Zhao, Y., Wang, L., Liu, J., Li, Y., Liang, Z., He, X., Tavajohi, N., ve Li, B. (2021). A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards. Journal of Energy Chemistry, 59, 83-99. https://doi.org/10.1016/j.jechem.2020.10.017
Contri, G., Zimmermann, C. A., Ramoa, S. D. A. D. S., Schmitz, D. P., Ecco, L. G., Barra, G. M. O., ve Fedel, M. (2020). Polypyrrole modified e-coat paint for corrosion protection of aluminum AA1200. Frontiers in Materials, 7, 45. https://doi.org/10.3389/fmats.2020.00045
Çalışkan, M., ve Kayır, Y. (2025). Görüntü işleme tekniği ile üretimde süreç izleme. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 8(4), 1975-1992. https://doi.org/10.47495/okufbed.1545564

García-Martín, J., Gómez-Gil, J., ve Vázquez-Sánchez, E. (2011). Non-destructive techniques based on eddy current testing. Sensors, 11(3), 2525-2565. https://doi.org/10.3390/s110302525
Gonçalves, L. S., Campilho, R., ve Prakash, C. (2023). Development of quality assurance system in the automotive industry. 10th Manufacturing Engineering Society International Conference, 132, 43-52. https://doi.org/10.4028/p-Rci2nA
Gupta, A. K., Arora, S. K., ve Westcott, J. (2016). Industrial automation and robotics: An introduction. Mercury Learning & Information.
Güçlü, E., Aydın, İ., ve Akın, E. (2024). Çift doğrusal CNN kullanarak çelik yüzey kusurlarının sınıflandırılması. Fırat Üniversitesi Mühendislik Bilimleri Dergisi, 36(1), 267-280. https://doi.org/10.35234/fumbd.1323339
Güçlü, E., Aydın, İ., Şener, T. K., Akın, E. (2022). Çelik Yüzeylerdeki Kusurların Tespiti için Derin Öğrenme Tabanlı Gömülü Sistem Tasarımı. EMO Bilimsel Dergi, 12(2), 27-33.
Haak, V., Yang, K., ve Meschut, G. (2024). Investigation of the electrical quality and long-term stability of aluminum ground stud connections in automotive applications. Journal of Advanced Joining Processes, 10, 100262. https://doi.org/10.1016/j.jajp.2024.100262
Han, C., Lee, J., Jun, M. B. G., et al. (2025). Visual coating inspection framework via self-labeling and multi-stage deep learning strategies. Journal of Intelligent Manufacturing, 36, 2461-2478. https://doi.org/10.1007/s10845-024-02372-9
Hinckley, C. M. (1997). Defining the best quality-control systems by design and inspection. Clinical Chemistry, 43(5), 873-879. https://doi.org/10.1093/clinchem/43.5.873
Jeong, Y.-N., Okwuosa, C. N., Hwang, J.-W., ve Hur, J.-W. (2025). Optimization of flow rate for uniform zinc phosphate coating on steel cylinders: A study on coating uniformity and elemental composition using scanning electron microscopy (SEM). Materials, 18, 2442. https://doi.org/10.3390/ma18112442
Jiang, Z., Hu, X., ve Wang, S. (2023). Image classification of car paint defect detection based on convolutional neural networks. Journal of Physics: Conference Series, 2456, 012037. https://doi.org/10.1088/1742-6596/2456/1/012037
Jones, A., Uggalla, L., Li, K., Fan, Y., Willow, A., Mills, C. A., ve Copner, N. (2021). Continuous in-line chromium coating thickness measurement methodologies: An investigation of current and potential technology. Sensors, 21, 3340. https://doi.org/10.3390/s21103340
Kesici, B., ve Yıldız, M. (2022). Performance evaluation of the IATF 16949:2016 quality management system in an automotive supplier with the balanced scorecard model. Trends in Business and Economics, 36, 203-214. https://doi.org/10.54614/TBE.2022.930725
Kılınç, M., ve Akyalçın, L. (2022). Kataforez kaplamalı çelik yüzeylere uygulanan dubleks kaplamanın korozyon dayanım performansı üzerindeki etkisinin incelenmesi. ESOGÜ Mühendislik Mimarlık Fakültesi Dergisi, 30(1), 68-78. https://doi.org/10.31796/ogummf.981120
Kong, Z., Jin, Y., Hong, S., Liu, Q., Vu, Q.-V., ve Kim, S.-E. (2022). Degradation behavior of the preload force of high-strength bolts after corrosion. Buildings, 12, 2122. https://doi.org/10.3390/buildings12122122
Learner, T. (2000). A review of synthetic binding media in twentieth-century paints. The Conservator, 24. https://doi.org/10.1080/01410096.2000.9995156
Li, J., Murphy, E., Winnick, J., ve Kohl, P. A. (2001). Studies on the cycle life of commercial lithium-ion batteries during rapid charge–discharge cycling. Journal of Power Sources, 102(1–2), 294-301. https://doi.org/10.1016/S0378-7753(01)00821-7
Li, Z., Yan, Y., Wang, X., Ge, Y., ve Meng, L. (2025). A survey of deep learning for industrial visual anomaly detection. Artificial Intelligence Review, 58, 279. https://doi.org/10.1007/s10462-025-11287-7
Lin, H.-D., Wu, H.-L., ve Lin, C.-H. (2025). A deep transfer learning-based visual inspection system for assembly defects in similar types of manual tool products. Sensors, 25, 1645. https://doi.org/10.3390/s25061645
Louda, Petr. (2007). Applications of Thin Coatings in Automotive Industry. Journal of Achievements in Materials and Manufacturing Engineering. 24.
Ma, J. (2020). An experimental study on factors affecting the friction coefficients in electroplated bolts. Tribology Transactions, 63, 1-15. https://doi.org/10.1080/10402004.2020.1778146
Maile, F., Pfaff, G., ve Reynders, P. (2005). Effect pigments – past, present and future. Progress in Organic Coatings, 54, 150-163. https://doi.org/10.1016/j.porgcoat.2005.07.003
Manoj Babu, M., Franciosa, P., ve Ceglarek, D. (2019). Spatio-temporal adaptive sampling for effective coverage measurement planning during quality inspection of free-form surfaces using robotic 3D optical scanner. Journal of Manufacturing Systems, 53, 93-108. https://doi.org/10.1016/j.jmsy.2019.08.003
Marcos, D., Garmendia, M., Crego, J., ve Cortajarena, J. A. (2021). Functional safety BMS design methodology for automotive lithium-based batteries. Energies, 14, 6942. https://doi.org/10.3390/en14216942
Marin-Garcia, J. A., Garcia-Sabater, J. J., ve Bonavia, T. (2009). The impact of Kaizen events on improving the performance of automotive components' first-tier suppliers. International Journal of Automotive Technology and Management, 9(4), 362-376. https://doi.org/10.1504/IJATM.2009.028524
Matope, S., Gibson, C., ve Blessed, S. (2022). Continuous improvement for cost savings in the automotive industry. Journal of Systems Architecture, 14(22), 15319. https://doi.org/10.3390/su142215319
Miao, R., Shen, R., Zhang, S., ve Xue, S. (2020). A review of bolt tightening force measurement and loosening detection. Sensors, 20(11), 3165. https://doi.org/10.3390/s20113165
Morales Matamoros, O., Takeo Nava, J. G., Moreno Escobar, J. J., ve Ceballos Chávez, B. A. (2025). Artificial intelligence for quality defects in the automotive industry: A systemic review. Sensors, 25, 1288. https://doi.org/10.3390/s25051288
Mourtzis, D., Milas, N., ve Athinaios, N. (2018). Towards machine shop 4.0: A general machine model for CNC machine-tools through OPC-UA. Procedia CIRP, 78, 301-306. https://doi.org/10.1016/j.procir.2018.09.045
Muram, F. U., Gallina, B., ve Gómez Rodríguez, L. (2018). Preventing omission of key evidence fallacy in process-based argumentations. 11th International Conference on the Quality of Information and Communications Technology (QUATIC), Coimbra, Portugal, 65-73. https://doi.org/10.1109/QUATIC.2018.00019
Muram, F. U., Pob, P., ve Javed, M. A. (2024). Assuring the safety of rechargeable energy storage systems in electric vehicles. Energy, 154, 103218. https://doi.org/10.1016/j.sysarc.2024.103218
Němcová, M., ve Paráková, M. (2021). Metal. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials (s. 705-710). May 26-28. https://doi.org/10.37904/metal.2021.4169
Nitta, N., Wu, F., Lee, J. T., ve Yushin, G. (2015). Li-ion battery materials: Present and future. Materials Today, 18(5), 252-264. https://doi.org/10.1016/j.mattod.2014.10.040
Öztürk, S., ve Kuncan, M. (2020). Kameradan alınan görüntünün CNC tezgâhında gerçek zamanlı olarak işlenmesi. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, 9(3), 1251-1263. https://doi.org/10.17798/bitlisfen.618965
Pedone, P., Vicario, G., ve Romano, D. (2009). Kriging-based sequential inspection plans for coordinate measuring machines. Applied Stochastic Models in Business and Industry, 25(2), 133-149. https://doi.org/10.1002/asmb.746
Peres, R., Jia, X., Lee, J., Sun, K., Colombo, A., ve Barata, J. (2020). Industrial artificial intelligence in Industry 4.0: Systematic review, challenges and outlook. IEEE Access, 8, 220121-220139. https://doi.org/10.1109/ACCESS.2020.3042874
Pilch-Pitera, B., Florczak, Ł., Czachor-Jadacka, D., Bellucco, F., Węgrzyniak-Kściuczyk, E., Daszykowska, K., ve Zychowicz, M. (2025). Anticorrosion activity of low-zinc powder coating primers containing single-walled carbon nanotubes. Materials, 18, 4587. https://doi.org/10.3390/ma18194587
Rudnick, L. R. (Ed.). (2017). Lubricant additives: Chemistry and applications (3rd ed.). CRC Press. https://doi.org/10.1201/9781315120621
Scholz-Reiter, B., Thamer, H., ve Lütjen, M. (2010). Optical quality assurance in micro production. Proceedings of International Multi Conference of Engineers and Computer Scientists (IMECS 2010), Hong Kong, China.
Schleipen, M., Gilani, S. S., T., Bischoff, T., ve Pfrommer, J. (2016). OPC UA & Industrie 4.0 – Enabling technology with high diversity and variability. Procedia CIRP, 57, 315-320. https://doi.org/10.1016/j.procir.2016.11.055
Semitela, Â., Pereira, M., Completo, A., Lau, N., ve Santos, J. P. (2025). Improving industrial quality control: A transfer learning approach to surface defect detection. Sensors, 25, 527. https://doi.org/10.3390/s25020527
Shen, X., Liu, H., Cheng, X.-B., Yan, C., ve Huang, J.-Q. (2018). Beyond lithium-ion batteries: Higher energy density battery systems based on lithium metal anodes. Energy Storage Materials, 12, 161-175. https://doi.org/10.1016/j.ensm.2017.12.002
Tsybulskaya, L., Gaevskaya, T. V., Purovskaya, O. G., ve Byk, T. (2008). Electrochemical deposition of zinc–nickel alloy coatings in a polyligand alkaline bath. Surface & Coatings Technology, 203, 234-239. https://doi.org/10.1016/j.surfcoat.2008.08.067
Tzampazaki, M., Zografos, C., Vrochidou, E., ve Papakostas, G. A. (2024). Machine vision – moving from Industry 4.0 to Industry 5.0. Applied Sciences, 14(4), 1471. https://doi.org/10.3390/app14041471
Wang, H., Wang, J., Chen, W., ve Xu, L. (2018). Automatic illumination planning for robot vision inspection system. Neurocomputing, 275, 19-28. https://doi.org/10.1016/j.neucom.2017.05.015
Wei, R., Foster, S., Mei, H., Yan, F., Yang, R., Habli, I., O’Halloran, C., Tudor, N., Kelly, T., ve Nemouchi, Y. (2024). ACCESS: Assurance case centric engineering of safety–critical systems. Journal of Systems and Software, 213, 112034. https://doi.org/10.1016/j.jss.2024.112034
Won, Y., Kim, S., Park, K.-J., ve Eun, Y. (2021). Continuous productivity improvement using IoE data for fault monitoring: An automotive parts production line case study. Sensors, 21(21), 7366. https://doi.org/10.3390/s21217366
Xu, J., Zhang, J., Zhang, K., Liu, T., Wang, D., ve Wang, X. (2020). An APF-ACO algorithm for automatic defect detection on vehicle paint. Multimedia Tools and Applications, 79. https://doi.org/10.1007/s11042-020-09245-2
Yaman, E., Ulubayrak, S., & Özbay, N. (2021). Fosfat Kaplama İşleminde Aktivasyon Parametreleri ve Kaplama Süresinin Kaplama Kalitesine Etkisi. Avrupa Bilim ve Teknoloji Dergisi (21), 629-634. https://doi.org/10.31590/ejosat.832850
Yan, X., Liu, Z., Zheng, M., et al. (2024). Preload control method of threaded fasteners: A review. Chinese Journal of Mechanical Engineering, 37, 97. https://doi.org/10.1186/s10033-024-01082-w
URL-1: https://www.opto-e.com/en/industries/ITALA-G-cameras-for-high-speed-check-of-injector-nozzles (Erişim Tarihi: 12 Kasım 2025).
URL-2: https://wileyindustrynews.com/en/contributions/panorama-view (Erişim Tarihi: 12 Kasım 2025).

Details

Primary Language

Turkish

Subjects

Automotive Mechatronics and Autonomous Systems

Journal Section

Research Article

Authors

Berk Ercoşkun ^*
0009-0003-5627-334X
Türkiye

Publication Date

March 6, 2026

Submission Date

May 23, 2025

Acceptance Date

November 24, 2025

Published in Issue

Year 2026 Volume: 16 Number: 1

DOI

https://doi.org/10.31466/kfbd.1704909

IZ

https://izlik.org/JA79WC47ZG

APA

Ercoşkun, B. (2026). Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi. Karadeniz Fen Bilimleri Dergisi, 16(1), 338-365. https://doi.org/10.31466/kfbd.1704909

AMA

1.Ercoşkun B. Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi. KFBD. 2026;16(1):338-365. doi:10.31466/kfbd.1704909

Chicago

Ercoşkun, Berk. 2026. “Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi”. Karadeniz Fen Bilimleri Dergisi 16 (1): 338-65. https://doi.org/10.31466/kfbd.1704909.

EndNote

Ercoşkun B (March 1, 2026) Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi. Karadeniz Fen Bilimleri Dergisi 16 1 338–365.

IEEE

[1]B. Ercoşkun, “Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi”, KFBD, vol. 16, no. 1, pp. 338–365, Mar. 2026, doi: 10.31466/kfbd.1704909.

ISNAD

Ercoşkun, Berk. “Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi”. Karadeniz Fen Bilimleri Dergisi 16/1 (March 1, 2026): 338-365. https://doi.org/10.31466/kfbd.1704909.

JAMA

1.Ercoşkun B. Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi. KFBD. 2026;16:338–365.

MLA

Ercoşkun, Berk. “Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi”. Karadeniz Fen Bilimleri Dergisi, vol. 16, no. 1, Mar. 2026, pp. 338-65, doi:10.31466/kfbd.1704909.

Vancouver

1.Berk Ercoşkun. Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi. KFBD. 2026 Mar. 1;16(1):338-65. doi:10.31466/kfbd.1704909

Aim & Scope

Author Guidelines

Click for the KFBD Template.

Copyright form

An ethics committee approval must be obtained for research conducted in all disciplines and for clinical and experimental studies on humans and animals, requiring ethical committee decision, and this approval should be stated and documented in the article.

Introduction

The Black Sea Journal of Sciences is a peer-reviewed national journal that is published six months period by the Institute of Natural Sciences at Giresun University. The aim of the journal is to release scientific and technological research to scientists, specialists, and the general public both at home and abroad.

The page structure of the paper should be A4 size (210x297mm) and all margins should be 2 cm. Both Turkish and English titles should be appropriate for the topic of the paper, should describe the purpose of the paper and its conclusion and should be short and simple. The title of the paper should be in bold, with initials large and centered and 14 pt Times New Roman font. The Turkish title in the English papers should be given before the Turkish abstract. Author names are written side by side under the heading, without abbreviation (surnames in capital letters). Abbreviations should not be used in addresses. Numerical overhead indices should be used for authors with different addresses. Names of the authors should be Times New Roman 12 pt. and addresses should be Times New Roman 10 pt and flat. Appellations should not be written before names. In addition, the corresponding author's e-mail address should be written in 10 pt Times New Roman font in Corresponding Author.

The main text should be typed in Times New Roman font with a font size of 12 pt and lines spacing of 1.5. Main headings should be numbered and written in bold, and the initial letter of each word within the heading should be capitalized. A single 1.5-sized line spacing should be left underneath each main heading. A single line spacing should also be left between the heading and the text preceding it. Paragraphs should be indented by 1 cm. Spacing should not be left between paragraphs.

An adequate number of academic/scientific literature relating to the research in question, as well the overall aims of the research should be provided and emphasized within this section. Here, one should avoid detailed examining the literature as well as should avoid summarizing any results.

Materials and Methods

Materials and methodology used in the conducting of the research need to be described in detail in this section.

Sub-Headings

This may include sub-headings within/under main headings.

Figures, Tables, and Equations

Figures can entail graphics, diagrams, photographs, illustrations, and/or maps. Figure descriptions should be written at the bottom of or below the figure(s), and should be legible. A single line space should be left between the figure and the text preceding it. Figure descriptions should be typed in a point-size of 11, as well as should be referenced. Giresun University is shown in Figure 1.

Tables preferably should be open framed. Table descriptions should be written at the top of or above table. Both the table and the table description should be aligned on the left of the page. A single line space should be left between the table and the text preceding it. Table descriptions preferably should be single-spaced and written in either 11 or 10 pt font, as well as should be referenced.

Equations—where needed—should be numbered from 1 and onwards. Equations are written starting with/following the paragraph. The equation number should be placed on the right edge. A single line spacing should be left between the equation and both the preceding as well as subsequent text. Equations should not be presented in the format of an image, but rather should be created using Microsoft Word’s Equation Editor

Findings and Discussion

The results of as well as the findings obtained from the research in question are provided in this section. Here, one can compare and contrast the obtained findings with other relevant academic/scientific literature.

Conclusions and Recommendations

The conclusions of the results obtained from the research in question are given in this section. Here, one can provide readers with suggestions and personal comments.

Acknowledgements

This section is where one can acknowledge and thank the individuals and/or institutions who helped with and supported the author(s) with her/his/their research.

References

The references should be typed in Times New Roman font with a size of 11 pt font in single line spacing. Bibliographic resources should be arranged in alphabetical order according to the surname(s) of the author(s), and should be written starting from the left corner margin of the page. References to citations within the text should include the author’s surname and the year of publication in parenthesis: (Surname, 2017), (Surname and Surname, 2017). In situations whereby a citation reference involves more than two authors, the abbreviation “et al.” is to be written after the first author’s surname: (Surname et al., 2017). In case of citing more than one resource, surnames and dates are to be separated using semicolons: (Surname, 2017; Surname and Surname, 2017). References should be prepared according to APA (American Psychological Association) Style format. Examples are given below.

Periodicals:

Surname, A., Surname, B. B., and Surname, C., (2017). Title of the Published Paper. Name of the Journal that the Paper is Featured/Published in, 7(1), 1-12.

Harlow, H. F. (1983). Fundamentals for preparing psychology journal articles. Journal of Comparative and Physiological Psychology, 55, 893-896.

Kernis, M. H., Cornell, D. P., Sun, C. R., Berry, A., Harlow, T., and Bach, J. S. (1993). There's more to self-esteem than whether it is high or low: The importance of stability of self-esteem. Journal of Personality and Social Psychology, 65, 1190-1204.

Scruton, R. (1996). The eclipse of listening. The New Criterion, 15(3), 5-13.

Henry, W. A., III. (1990, April 9). Making the grade in today's schools. Time, 135, 28-31.

Schultz, S. (2005, December 28). Calls made to strengthen state energy policies. The Country Today, pp. 1A, 2A.

Moller, G. (2002, August). Ripples versus rumbles [Letter to the editor]. Scientific American, 287(2), 12.

Baumeister, R. F. (1993). Exposing the self-knowledge myth [Review of the book The self-knower: A hero under control, by R. A. Wicklund and M. Eckert]. Contemporary Psychology, 38, 466-467.

Brownlie, D. (2007). Toward effective poster presentations: An annotated bibliography. European Journal of Marketing, 41, 1245-1283. doi:10.1108/03090560710821161

Wooldridge, M. B., and Shapka, J. (2012). Playing with technology: Mother-toddler interaction scores lower during play with electronic toys. Journal of Applied Developmental Psychology, 33(5), 211-218. http://dx.doi.org/10.1016/j.appdev.2012.05.005

Kenneth, I. A. (2000). A Buddhist response to the nature of human rights. Journal of Buddhist Ethics, 8. Retrieved from http://www.cac.psu.edu/jbe/twocont.html

Smyth, A. M., Parker, A. L., and Pease, D. L. (2002). A study of enjoyment of peas. Journal of Abnormal Eating, 8(3), 120-125. Retrieved from

http://www.articlehomepage.com/full/url/

Books:

Surname, A. A., (2017). Book title. Location of where the book was published: Publisher.

Mayer, D. (2010). Essential evidence-based medicine (2nd ed.). Cambridge, England: Cambridge University Press.

Glasgow, N. A., McNary, S. J., and Hicks, C. D. (2006). What successful teachers do in diverse classrooms. Thousand Oaks, CA: Corwin Press.

Calfee, R. C., and Valencia, R. R. (1991). APA guide to preparing manuscripts for journal publication. Washington, DC: American Psychological Association.

Duncan, G. J., and Brooks-Gunn, J. (Eds.). (1997). Consequences of growing up poor. New York, NY: Russell Sage Foundation.

Plath, S. (2000). The unabridged journals. K. V. Kukil (Ed.). New York, NY: Anchor.

Laplace, P. S. (1951). A philosophical essay on probabilities. (F. W. Truscott and F. L. Emory, Trans.). New York, NY: Dover. (Original work published 1814)

Helfer, M. E., Kempe, R. S., and Krugman, R. D. (1997). The battered child (5th ed.). Chicago, IL: University of Chicago Press.

O'Neil, J. M., and Egan, J. (1992). Men's and women's gender role journeys: A metaphor for healing, transition, and transformation. In B. R. Wainrib (Ed.), Gender issues across the life cycle (pp. 107-123). New York, NY: Springer.

Wiener, P. (Ed.). (1973). Dictionary of the history of ideas (Vols. 1-4). New York, NY: Scribner's.

Symposiums, Congresses, Presentations:

Surname, A., Surname, B. B., and Surname, C., (2017, Month). Title of the Published Presentation. Name of the Symphosium, Congress, Meeting or Conference that the Presentation was delivered at. (pp. 1-12). City: University or Institution (If available).

Schnase, J. L., and Cunnius, E. L. (Eds.). (1995). Proceedings from CSCL '95: The First International Conference on Computer Support for Collaborative Learning. Mahwah, NJ: Erlbaum.

Armstrong, D. B., Fogarty, G. J., and Dingsdag, D. (2007). Scales measuring characteristics of small business information systems. In W-G. Tan (Ed.), Proceedings of Research, Relevance and Rigour: Coming of age: 18th Australasian Conference on Information Systems (pp. 163-171). Toowoomba, Australia: University of Southern Queensland.

Green, D. B. and DeSilva, A. (2015, June). The toxicity levels of household chemicals. Paper presented at the National Symposium on Air Pollution, University of Southern California, California.

Taylor, J. A. (2006, November). Assessment: a tool for development and engagement in the first year of university study. Paper presented at the Engaging Students: 9th Pacific Rim in Higher Education (FYHE) Conference, Griffith, Australia. Retrieved from http://www.fyhe.com.au/past_papers/2006/Papers/Taylor.pdf

Theses and Dissertations:

Surname, A. A., (2017). Title of the Graduate or Doctoral Thesis/Dissertations. Graduate Thesis, Giresun University, Institute of Natural Sciences, Giresun.

Yoshida, Y. (2001). Essays in urban transportation. Dissertation Abstracts International, 62, 7741A.

Considine, M. (1986). Australian insurance politics in the 1970s: Two case studies. (Unpublished doctoral dissertation). University of Melbourne, Melbourne, Australia.

Kassover,A. (1987). Treatment of abusive males: Voluntary vs. court-mandated referrals (Unpublished doctoral dissertation). Nova University, Fort Lauderdale, FL.

Biswas, S. (2008). Dopamine D3 receptor: A neuroprotective treatment target in Parkinson's disease. Retrieved from ProQuest Digital Dissertations. (AAT 3295214)

Cooley, T. (2009). Design, development, and implementation of a Wireless Local Area Network (WLAN): The Hartford Job Corps Academy case study (Doctoral dissertation). Available from ProQuest Dissertations and Theses database. (UMI No. 3344745)

Adams, R. J. (1973). Building a foundation for evaluation of instruction in higher education and continuing education (Doctoral dissertation). Retrieved from http://www.ohiolink.edu/etd/

Other Resources:

Bergmann, P. G. (1993). Relativity. In The New Encyclopedia Britannica. (Vol. 26, pp. 501-508). Chicago, IL: Encyclopedia Britannica.

Bernstein, M. (2002). 10 tips on writing the living Web. A List Apart: For People Who Make Websites, 149. Retrieved from http://www.alistapart.com/articles/writeliving

Hallam, A. Duality in consumer theory [PDF document]. Retrieved from Lecture Notes Online Web site: http://www.econ.iastate.edu/classes/econ501/Hallam/index.html

URL-1: http://www.giresun.edu.tr, (Date Accessed: 22 Mart 2017).

Authors should prepare their papers in accordance with the editorial writing guidelines of our journal.

Click for the KFBD Template.

Copyright form

Ethical Principles and Publication Policy

The Black Sea Journal of Sciences is a peer-reviewed academic journal that is published four times a year in March, June, September and December.

Prospective papers are expected to fill a gap in their respective field through innovative research.

Our journal employs a bilateral blind review system in which the personal identities of the reviewers and authors are kept confidentialed from one another, and whereby the parties involved are expected not to reveal themselves. With this objective in mind, parties submitting the file in question to the system such as the author, editor, and/or reviewer must handle the uploading of those files to the system with utmost care and attention.

The publishing team first examines (the) prospective papers in accordance with the criteria of the journal’s scope, as well as for scientific content and format. After the pre-review step, the papers are forwarded to at least two reviewers for evaluation. In order for a paper to be accepted, it must receive positive evaluations from both reviewers. Papers can be requested to be reviewed again if needed and evaluation of a third reviewer should necessity warrant it. The final decision is made by the editor.

Papers that are to be submitted for publishing are first controlled using special detection software in order to verify that they have not been previously published elsewhere, as well as to ensure that they do not include any plagiarized content.

Publishing takes between 2 to 6 months from the acceptance date.

The publishing or evaluation of manuscripts are free of charge.

KFBD sign on to the Budapest Open Access Initiative (BOAI), which promotes free access to research literature, and has adopted the Open Access Principles that clarified in this initiative.

The Black Sea Journal of Sciences is an open access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the BOAI definition of open access.

Academic research submitted to our journal is run through plagiarism detection software in order to check for any possible plagiarized content. Authors are expected as they declare that their work do not include any plagiarism. A report regarding this issue is sent to the authors.

The publishing or evaluation of manuscripts are free of charge.

This journal makes use of the LOCKSS system, which allows participating libraries to create a distributed digital archiving system, as well as allowing libraries to develop permanent archives for the purposes of protection and restoration.

An author’s paper is entitled to copyright protection, and is to give her/his copyright to the journal upon its first initial publishing. One’s paper is licensed under the Creative Commons Attribution License, which enables it to be shared by others via permission from the author as well according to the terms and conditions laid out by this journal upon (the paper’s) first initial publishing.

The author is entitled to have a separate contract drawn up in which allows for her/his paper as it is published in our journal to be distributed without providing full authorisation (e.g., a paper’s being sent to the databank of an institution, or for its being published in a book, etc.)

Authors are encouraged to share their share their papers via the internet either before they submit their work to our journal or as they wait through the submission process (e.g., to an institutional database or via their own personal websites, etc.). In doing so, this allows both for a fruitful exchange of ideas and feedback, as well as allows for the paper to be earlier as well as more widely referenced (see: The Effects of Open Access).

RESPONSIBILITIES OF EDITORS AND THE EDITORIAL BOARD

All editors of The Black Sea Journal of Sciences are independent in their evaluations and decisions in the journal. No external and/or internal factor can affect their decisions. If the editors are exposed to any kind of positive and/or negative constraints, they keep the right to take legal action against those involved in the constraint. On the other hand, editors are responsible for their decisions in the journal. The editor-in-chief is the only person responsible for journal content and on-time publishing.

Editors and members of the Editorial Board of the journal are forbidden to share submitted materials with third parties other than section editors, statistical editors, Language editors, copy editors, design editors and referees when needed, and to use the submitted materials themselves. If there is a conflict of interest among an editor and an author or institution of the author in terms of cooperation or competition, then another member of the Editorial board is assigned to manage the evaluation process.

Editors provide peer review of submitted manuscripts by assigning at least two reviewers expert in the field. Editor-in-chief is responsible in decision of publishing a manuscript considering the importance of the manuscripts for researchers and readers, reviewer reports, plagiarism and copyright infringement as legal issues. Editor-in-chief can discuss with other editors and reviewers for his/her decision.

RESPONSIBILITIES OF REVIEWERS

Peer-reviewing of a submitted manuscript is the control of its scientific content, scientific layout and suitability according to the principles of the journal, and delivery of the reviewer opinion for unsuitable manuscript content to ensure suitability. The reviewing process not only enables reviewers to forward their evaluations about the manuscripts to the editors but also give them the opportunity to improve the contents of the manuscripts.

If a reviewer assigned for evaluation of a manuscript is of expert of a field of science other than the manuscript content, is far to the subject of the manuscript, is short of time for evaluation or possess a conflict of interest, then he/she should inform the assigning editor and ask his/her withdrawal. If the content of the manuscript fits the expertise field of the reviewer, then he/she should complete the evaluation and send the report to the editor as soon as possible.

Reviewers assigned for evaluation of manuscripts approve in advance that the manuscripts are secret documents and do not share any information about these documents with third parties except the editors involved in the evaluation. Reviewers continue to not to share information even after the manuscripts are accepted or rejected for publication. If it is suspected of using an idea in the manuscript that is sent for evaluation to the reviewer without permission, the flowchart of COPE “What to do if you suspect a reviewer has appropriated anauthor's ideas or data?” is fallowed.

Reviewers should construct their criticisms on a scientific background and include scientific evidences in their statements. All comments raised by the reviewers to improve the manuscripts should be clear and direct and written in a manner far away from disturbing author feelings. Insulting and derogatory statements should be avoided.

Reviewers should determine quotations in the manuscripts used without citing a reference. Statements, observations, conclusions or evidences in published articles should be quoted with the citation of the related reference. Reviewers should also be sure about the reality of presence of quotations in the cited reference(s).

If a reviewer is in a situation by being involved in one or more interests with the author(s), he/she should inform the editor the assigning editor and ask his/her withdrawal.

RESPONSIBILITIES OF THE AUTHORS

Authors of original research articles should present the results and discuss on them in a proper way. Since the methodological contents of the articles should be reproducible, the authors should be clear in their statements and should not purposely report wrong or missing data.

Authors may be asked to present their Raw data when needed (ethical cases etc.). Therefore, raw data of the manuscripts should be kept in safety to present if needed. The storage period of raw data following publications should be at least 10 years.

The authors of submitted manuscripts should be sure that their manuscripts are original or include cited references for quotations.

It is not an approved way to produce more than one publication reporting on the same research. The authors should pay attention to such cases and they should not submit the same manuscript to different journals simultaneously.

Only the following persons should be included in the manuscripts as responsible authors:

1) Researchers providing major contribution to concept, design, performing, data collection and/or analysis in a study,

2) Researchers involved in preparation or critical revision of manuscripts,

3) Researchers approved the latest version of the manuscripts and accepted its submission.

Contributors other than the above list (technical assistance, helpers in writing and editing, general contributions etc.) should not be involved in the authors list but can be listed in acknowledgments section. The corresponding authors of manuscripts should provide the separate listing of contributors as authors and those to be involved in acknowledgments section.

Authors should clearly declare any kind of conflict of interests in their manuscripts. Absence of conflict of interests about the topic of the manuscripts should also be declared. The most common types of conflict of interests are financial supports, education or other types of funds, personal or institutional relations and affiliations. All sources of financial supports (with their grant or other reference numbers) of the studies should be declared.

Authors should not use personally obtained information (conversations, correspondences or discussions with bystanders) unless they have the permission of their sources. Information about private documents or refereeing of grant applications should not be used without the permission of the authorities providing the related service.

Authors are obliged to be involved in the peer review process and should cooperate by responding raw data, evidence for ethical approvals, patient approvals and copyright release form requests of editors and their explanations. Authors should respond either in positive or a negative way to revision suggestions generated by the peer review process. They should be sure to include their counter views in their negative responses.

Authors should contact with the journal editor or the publisher for an erratum when they notice an important error or mistake in their published manuscripts. If the editor notices the error, he/she starts the process about erratum on or withdrawal of the published manuscripts.

Price Policy

Indexes

Journal Boards

Editor-in-Chief

Kenan YANMAZ

Electrical Energy Transmission, Networks and Systems, Electrical Energy Generation (Incl. Renewables, Excl. Photovoltaics), Power Plants, Photovoltaic Power Systems, Power Electronics, Control Theoryand Applications, Numerical Design

Publishing Manager

BK

Bahadır KOZ

Biological Sciences, Bryophyte

Editörler / Editors

Kenan YANMAZ

Electrical Energy Transmission, Networks and Systems, Electrical Energy Generation (Incl. Renewables, Excl. Photovoltaics), Power Plants, Photovoltaic Power Systems, Power Electronics, Control Theoryand Applications, Numerical Design

Selin KALKAN

Food Packaging, Preservation and Processing, Food Microbiology

ZK

Zeliha KAYA

Food Engineering, Culinary Arts, Turkish Cuisine, Functional Foods, Food Technology, Fruit-Vegetables Technology

BK

Bahadır KOZ

Biological Sciences, Bryophyte

Field Editors

RS

Resul SEVINÇEK

Atomic, Molecular and Optical Physics, Atomic and Molecular Physics, Material Physics, Crystallography

ME

Mehmet Soner ENGIN

Instrumental Methods, Analytical Chemistry (Other), Engineering

Murat GÜL

Statistics, Statistical Analysis, Probability Theory, Stochastic Analysis and Modelling, Applied Statistics, Operation, Stochastic (Probability ) Process

Volkan BAŞER

Engineering, Geomatic Engineering, Land Management, Geospatial Information Systems and Geospatial Data Modelling, Cadastral and Property , Geographical Information Systems (GIS) in Planning

TA

Tayfun ARSLAN

Bioinorganic Chemistry, Organic Chemistry, Organic Chemical Synthesis, Organic Green Chemistry, Molecular Medicine

Onur Ozdal MENGI

Power Electronics, Control Theoryand Applications, Renewable Energy Resources , Control Engineering

SS

Serdar SOYLU

Algebraic and Differential Geometry

Seydahmet ÇAY

Analytical Chemistry, Analytical Spectrometry, Water Treatment Processes

Birkut GÜLER

Biomass Energy Systems, Mechanical Engineering

Mehmet KILINÇ

Textile Sciences and Engineering, Textile Technology, Textile Sciences and Engineering (Other)

Abdullah AKKAYA

Physical Sciences, Condensed Matter Physics, Microelectronics, Semiconductors

Erdinç ŞAHIN

Fuzzy Computation, Electrical Engineering, Electrical Energy Generation (Incl. Renewables, Excl. Photovoltaics), Control Theoryand Applications, Renewable Energy Resources

ET

Ersin TEMEL

Physical Sciences, Condensed Matter Modelling and Density Functional Theory, Structural Properties of Condensed Matter

SK

Serdal KAYA

Organic Chemical Synthesis, Organic Chemistry (Other)

Fulya AYDIN TEMEL

Environmental Biotechnology, Environmental Engineering, Treatment Facility Design, Waste Management, Reduction, Reuse and Recycling, Environmental Pollution and Prevention, Environmentally Sustainable Engineering, Solid and Hazardous Wastes, Clean Production Technologies, Environmental Engineering (Other), Wastewater Treatment Processes

SA

Selen AYAS

Image Processing, Pattern Recognition, Deep Learning, Machine Vision , Machine Learning Algorithms

SA

Selçuk ATASOY

Material Design and Behaviors

Eren KÖMÜRLÜ

Civil Engineering, Civil Geotechnical Engineering, Rock Mechanics and Fortification

Süleyman KÖSE

Maritime Business Administration, Marine Technology, Marine Transportation, Maritime Transportation Engineering, Marine Vehicles Management Engineering, Ship Energy Efficiency, Mechanical Engineering

AÇ

Ahmet ÇELIK

Physical Sciences, Radiophysics

TÖ

Temel ÖZTÜRK

Chemical Sciences, Solution Chemistry, Inorganic Materials, Nuclear Chemistry, Polymerisation Mechanisms, Macromolecular and Materials Chemistry (Other), Polymer Science and Technologies, Polymer Physics, Polymer Technologies, Polymers and Plastics

Oğuz OĞUR

Lie Groups, Harmonic and Fourier Analysis, Operator Algebras and Functional Analysis, Real and Complex Functions (Incl. Several Variables), Pure Mathematics (Other)

Mehmet Ali USTA

Electrical Machines and Drives, Power Electronics, Control Theoryand Applications

Mizanpaj Editörleri / Manuscript Editors

Kenan YANMAZ

Electrical Energy Transmission, Networks and Systems, Electrical Energy Generation (Incl. Renewables, Excl. Photovoltaics), Power Plants, Photovoltaic Power Systems, Power Electronics, Control Theoryand Applications, Numerical Design

Arzu AYDIN UNCUMUSAOĞLU

Natural Resource Management, Conservation and Biodiversity, Ecological Impacts of Climate Change and Ecological Adaptation, Engineering, Environmental Engineering, Aquaculture and Fisheries

Yazı İşleri Müdürü / Editorial Manager

Kenan YANMAZ

Electrical Energy Transmission, Networks and Systems, Electrical Energy Generation (Incl. Renewables, Excl. Photovoltaics), Power Plants, Photovoltaic Power Systems, Power Electronics, Control Theoryand Applications, Numerical Design

The published articles in The Black Sea Journal of Sciences are licensed under Creative Commons Attribution-NonCommercial 4.0 International

Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi

Batarya Taşıyıcı Final Kontrol Sisteminde Parça Cıvatalarındaki Boya Hata Tespit Sürecinin İyileştirilmesi

Abstract

Keywords

Improvement of the Paint Error Detection Process on Part Screws in a Battery Carrier Final Inspection System

Abstract

Keywords

References

Details

Primary Language

Subjects

Journal Section

Authors

Publication Date

Submission Date

Acceptance Date

Published in Issue

DOI

IZ

Cite

Aim & Scope

Author Guidelines

Ethical Principles and Publication Policy

Price Policy

Indexes

Citation Indexes

Other Indexes

Journal Boards

Editor-in-Chief

Publishing Manager

Editörler / Editors

Field Editors

Mizanpaj Editörleri / Manuscript Editors

Yazı İşleri Müdürü / Editorial Manager