You can access the Article Submission Guidelines here.
You can access the Article Submission Guidelines video here.
You can download the reference style for use in Vancouver and Zotero here.
Please download the article template here.
For comprehensive information regarding the journal's policies on submission, peer-review, publication, and ethical standards, kindly visit the
Policies page. Similarly, for detailed information about the journal, please visit the
Aims and Scope page.It is strongly advised to review the journal's policies before submitting any manuscripts to ensure compliance with the journal's guidelines.
Manuscripts submitted for evaluation should be original and not previously presented or published in any electronic or print medium. If a manuscript was previously presented at a conference or meeting, authors should provide detailed information about the event, including the name, date, and location of the organization.
Authors are required to prepare manuscripts in accordance with the relevant guideline listed below:
• Observational original research studies:
STROBE guidelines
• Systematic reviews and meta-analysis:
PRISMA guidelines (for protocols, please see
the PRISMA-P guidelines)• Nonrandomized evaluations of behavioral and public health interventions
: TREND guidelines
• Qualitative research:
SRQR guidelines
To find the right guideline for your research, please complete the questionnaire by Equator Network
here.
Trends in Business and Economics encourages authors to follow the ‘
Sex and Gender Equity in Research – SAGER – guidelines’ when preparing their manuscripts to promote the inclusion of sex and gender considerations in research. Before submission, authors can consult
EASE Guidelines for Authors and Translators to produce clear, concise and accurate manuscripts that are easy to understand and free of common errors and pitfalls.
The style of manuscripts should follow the Publication Manual of the American Psychological Association (APA), Seventh Edition (2020).
Manuscripts can only be submitted through the journal’s online manuscript submission and evaluation system. Manuscripts submitted via any other medium and submissions by anyone other than one of the authors will not be evaluated.
In addition to the manuscript files, authors are required to submit the following during the initial submission:
· Copyright Agreement and Acknowledgement of Authorship Form
Preparation of the Manuscript
Title page: A separate title page should be submitted with all submissions and this page should include:
• The full title of the manuscript as well as a short title (running head) of no more than 50 characters,
• Name(s), affiliations, highest academic degree(s), and ORCID IDs of the author(s),
• Grant information and detailed information on the other sources of support,
• Name, address, telephone (including the mobile phone number), and email address of the corresponding author,
• Acknowledgment of the individuals who contributed to the preparation of the manuscript but who do not fulfill the authorship criteria.
• If the author(s) is a member of the journal’s Editorial Board, this should be specified in the title page.
Abstract: The English abstract of each article is published. For Turkish articles, an English abstract is mandatory. Please check Table 1 below for word count specifications.
Keywords: Each submission must be accompanied by a minimum of three to a maximum of six keywords for subject indexing at the end of the abstract. The keywords should be listed in full without abbreviations.
MANUSCRIPT TYPES
Research Articles: Research articles provide new information based on original research. The acceptance of research articles is typically based on the originality and importance of the research. The main text of a Research Article should be structured with subheadings, including Introduction, Methods, Results, and Discussion.
Please check Table 1 for the limitations for Research Articles.
Reporting Statistical Analysis
Information on statistical analyses should be provided with a separate subheading under the Materials and Methods section and the statistical software that was used during the process must be specified.
When reporting statistical data in a research paper, it is important to present the values in a clear and consistent manner. p values, confidence intervals (CIs), and other statistical measures should be rounded appropriately and expressed according to the guidelines provided. For example, p values should be expressed to two digits to the right of the decimal point unless the first two digits are zeros, in which case three digits should be provided (eg, instead of p < .01, report as p = .002). However, values close to .05 may be reported to three decimal places because .05 is an arbitrary cut-off point for statistical significance (eg, p = .053). p values less than .001 should be designated as p < .001 rather than providing the exact value (eg, p = .000006).
Units should be prepared in accordance with the International System of Units (SI).
Review Articles
Review articles that are written by authors with extensive knowledge and expertise in a particular field and a strong track record of publication are welcomed. These authors may even be invited to contribute a review article to the journal. Review articles should provide a comprehensive overview of the current state of knowledge on a topic in the journal’s topic, and should include discussions and evaluations of relevant research. The subheadings of the review articles can be planned by the authors. However, each review article should include an “Introduction” and a “Conclusion” section. Please check Table 1 for the limitations for Review Articles.
Letters to the Editor
A "Letter to the Editor" is a type of manuscript that discusses important or overlooked aspects of a previously published article. This type of manuscript may also present articles on subjects within the scope of the journal that are of interest to readers, particularly educational cases. Readers can also use the "Letter to the Editor" format to share their comments on published manuscripts. The text of a "Letter to the Editor" should be unstructured and should not include an abstract, keywords, tables, figures, images, or other media. The manuscript that is being commented on must be properly cited within the "Letter to the Editor."
Editorial Comments
Invited brief editorial comments on selected articles are published in the Trends in Business and Economics. Editorials should not be longer than 1000 words excluding references. Editorial comments aim to provide a brief critical commentary by reviewers with expertise or with high reputation in the topic of the research article published in the journal. Authors are selected and invited by the journal to provide such comments. Abstract, Keywords, and Tables, Figures, Images, and other media are not included.
Table 1. Limitations for each manuscript type
Type of manuscript
| Word limit*
| Abstract word limit
| Reference limit
| Table limit
| Figure limit
|
Research Article
| 8000 | 250 (Structured)
| 50 | 8 | 5 or total of 10 images
|
Review Article
| 9000 | 250
| 50 | 6 | 10 or total of 15 images
|
Letter to the Editor
| 600 | No abstract
| 5 | No tables
| No media
|
Editorial Comments
| 1000 | No abstract
| 10 | No tables
| No media
|
*Word limit should not include the abstract, references, tables, and figure legends.
Tables
Tables should be included in the main document, after the reference list, and they should be numbered consecutively in the order they are referred to within the text. Each table should have a descriptive title placed above it, and any abbreviations used in the table should be defined below the table by footnotes (even if they are defined in the main text). Tables should be created using the "insert table" command of the Word processing software, and they should be arranged clearly to make the data easy to read and understand. The data presented in the tables should not be a repetition of the data presented in the main text, but should support and enhance the main text.
Table Examples in APA Format
Table 1
Descripttve Statlstics and Correlatlons tor Study Vorlab/e
Variable
| n | M | SD | 1 | 2 | 3 | 4 | 5 | 6 |
1. lnternaı-external status a
| 3,697
| 0.43
| 0.419
| - |
|
|
|
|
|
2. Manager Job performance
| 2,134 | 3.14 | 0.62 | -.08 | -
|
|
|
|
|
3. Starting salary b
| 3,697 | 1.01 | 0.27 | .45 | -.01 | -
|
|
|
|
4. Subsequent promotlon
| 3.677 | 0.33 | 0.47 | .08 | .07 | .04 | -
|
|
|
5. Organlzatlonal tenure
| 3.677
| 6.45 | 6.62
| -.29 | .09 | .01 | .09 | -
|
|
6. unıt service performance c
| 3.505
| 85.00 | 6.98
| -.25 | -.39 | .24 | .08 | .01 | -
|
Note: a O= internal hlres and 1 = external hlres. b A llnear transformatlon was performed on the sta rtlng salary values to malntaln pay practlce confidentlallty. The standard deviatlon (0.27) can be lnterpreted as 27% of the average startlng salary for ali managers. Thus, ±1 SD includes a range of startlng salarıes from 73% (l.e., 1.00 - 0.27) to 127% (l.e., 1.00 + 0.27) of the average starting saıarıes for afi managers. c values reflect the average across 3 years of data.
"p < .05. -p < .01.
Table 2
Results of Curve-Fitting Analysis Examining the Time Course of Fixations to the Target
| 9-year-olds
M 50 | 16-year-olds
M 50 | t(40)
| p
| Cohen's d
|
|
Logistic Paramaeter
|
|
|
|
|
|
|
Maximum asymptote, proportion
| .843 .135
| .877 082
| 0.951
| .347
| 0.302
|
|
Crossover, in msCrossover, in ms
| 759 87
| 694 42
| 2.877
| .006
| 0.840
|
|
Slope, as change in proportion per ms
| 0.01 0002
| .002 .0002
| 2.635
| .012
| 2.028
|
|
Figures and Figure Legends
Figures should be submitted as separate files in TIFF or JPEG format, and they should not be embedded in the Word document or the main manuscript file. If a figure has subunits, each subunit should be submitted as a separate file, and the subunits should not be merged into a single image. The figures should not be labeled (a, b, c, etc.) to indicate subunits. Instead, the figure legend should be used to describe the different parts of the figure. Thick and thin arrows, arrowheads, stars, asterisks, and similar marks can be used on the images to support figure legends.Images should be anonymized to remove any information that may identify individuals or institutions. The minimum resolution of each figure should be 300 DPI, and the figures should be clear and easy to read. Figure legends should be listed at the end of the main document. Figures should be referred to within the main text, and they should be numbered consecutively in the order in which they are mentioned.
Abbreviations
All acronyms and abbreviations used in the manuscript should be defined at first use, both in the abstract and in the main text. The abbreviation should be provided in parentheses following the definition, and it should be used consistently throughout the paper.
Identifying products
When mentioning a drug, product, hardware, or software program in a manuscript, it is important to provide detailed information about the product in parentheses. This should include the name of the product, the producer of the product, and the city and country of the company. For example, if mentioning a Discovery St PET/CT scanner produced by General Electric in Milwaukee, Wisconsin, USA, the information should be presented in the following format: "Discovery St PET/CT scanner (General Electric, Milwaukee, WI, USA)." Providing this information helps to ensure that the product is properly identified and credited.
Supplementary Materials
Supplementary materials, including audio files, videos, datasets, and additional documents (e.g., appendices, additional figures, tables), are intended to complement the main text of the manuscript. These supplementary materials should be submitted as a separate section after the references list. Concise descriptions of each supplementary material should be included to explain their relevance to the manuscript. Page numbers are not required for supplementary materials.
References
Both in-text citations and the references must be prepared according to the Publication Manual of the American Psychological Association (APA), Seventh Edition (2020).
When citing publications, preference should be given to the latest, most up-to-date sources. Citing the latest sources can help to ensure that the paper is relevant and timely, and that it reflects the latest developments in the field.
It is the responsibility of the authors to ensure the accuracy of the references in their article. All sources must be properly cited, and the citations must be formatted correctly.
To avoid plagiarism, it is necessary to acknowledge other sources in your paper through in-text citations. For every in-text citation, a corresponding reference list entry must be provided.
The APA in-text citation style includes the author's last name and the year of publication, such as (Field, 2005). If quoting directly from a source, the page number should also be added, such as (Field, 2005, p. 14).
If an ahead-of-print publication is cited, the DOI number should be provided in the reference list.
The reference styles for different types of publications are presented in the following examples.
Autbor Type
| Parentbetical citation
| Narrative citation
| Direct quote citation in narentbeses
| Direct quote citation with narration
|
One author
| (Gonzalez, 2019)
| (Gonzalez, 2019)
| (Gonzalez, 2019, p. 20) | (Gonzalez, 2019, p. 20)
|
Two authors
| (Gonzalez & Jones, 2019)
| (Gonzalez & Jones, 2019)
| (Gonzalez & Jones, 2019, P. 20)
| (Gonzalez & Jones, 2019, P. 20)
|
Three or more authors
| (Gonzalez et al., 2019)
| (Gonzalez et al., 2019)
| (Gonzalez et al., 2019, p. 20)
| (Gonzalez et al., 2019, p. 20)
|
Group author '" th abbreviation: First citation Subsequent citations
| (American Psychologic.1! Association [APA], 2020) (APA, 2020)
| (American Psychologic.1! Association [APA], 2020) (APA, 2020)
| (American Psychologic.1! Association [APA], 2020, s. 19) (APA, 2020, s. 19)
| (American Psychologic.1! Association [APA], 2020, s. 19) (APA, 2020, s. 19)
|
Group author \\ thout abbreviation
| (University of California, 2020)
| (University of California, 2020)
| (University of California, 2020, p. 21)
| (University of California, 2020, p. 21)
|
No author
| ("Newdrug," 1993) Use an abbre\ ated version of the title
|
|
|
|
Journal Article: Edwards, A. A., Steacy, L. M., Siegelman, N., Rigobon, V. M., Kearns, D. M., Rueckl, J. G., & Compton, D. L. (2022). Unpacking the unique relationship between set for variability and word reading development: Examining word- and child-level predictors of performance.
Journal of Educational Psychology,
114(6), 1242–1256. https://doi.org/10.1037/edu0000696
Book Section: Zeleke, W. A., Hughes, T. L., & Drozda, N. (2020). Home–school collaboration to promote mindbody health. In C. Maykel & M. A. Bray (Eds.), Promoting mind–body health in schools: Interventions for mental health professionals (pp. 11–26). American Psychological Association. https://doi.org/10.1037/0000157-002
Books with a Single Author: Haslwanter, T. (2022). An introduction to statistics with Python. New York, NY: Springer International Publishing.
Editor(s) as Author: Rhodewalt, F. (Ed.). (2008). Personality and social behavior. Psychology Press.
Thesis: Valentin, E. R. (2019, Summer). Narcissism predicted by Snapchat selfie sharing, filter usage, and editing [Master's thesis, California State University Dominguez Hills]. CSU ScholarWorks.
https://scholarworks.calstate.edu/concern/theses/3197xm925?locale=enWebsites: Chandler, N. (2020, April 9). What’s the difference between Sasquatch and Bigfoot? howstuffworks.
https://science.howstuffworks.com/science-vs-myth/strange-creatures/sasquatch-bigfootdifference.htmhttps://science.howstuffworks.com/science-vs-myth/strange-creatures/sasquatch-bigfootdifference.htm
Epub Ahead of Print Articles: Muldoon, K., Towse, J., Simms, V., Perra, O., & Menzies, V. (2012). A longitudinal analysis of estimation, counting skills, and mathematical ability across the first school year. Developmental Psychology. Epub ahead of print. doi:10.1037/a0028240.
In the seventh edition, up to 20 authors should now be included in a reference list entry. For sources with more than 20 authors, after the 19th listed author, any additional authors' names are replaced with an ellipsis (…) followed by the final listed author's name:
Author, A. A., Author, B. B., Author, C. C., Author, D. D., Author, E. E., Author, F. F., Author, G. G., Author, H. H., Author, I. I., Author, J. J., Author, K. K., Author, L. L., Author, M. M., Author, N. N., Author, O. O., Author, P. P., Author, Q. Q., Author, R. R., Author, S. S., . . . Author, Z. Z.
ProductionOnce a manuscript has been accepted for publication, it goes through a copy-editing process by professional language editors to ensure that it is clear and well-written. This process may involve correcting grammar, punctuation, and formatting errors, as well as making changes to improve the overall clarity and readability of the manuscript.
After the copy-editing process is complete, the manuscript is published online as an "ahead-of-print" publication, which means that it is available to readers before it is included in a scheduled issue of the journal. This allows readers to access the latest research as soon as it becomes available.
Before the manuscript is officially published, the corresponding author is sent a PDF proof of the accepted manuscript for review. The corresponding author is asked to review the proof and approve it for publication within a specified time period, typically 2 days. This is an important step in the publication process, as it allows the author to catch any errors or make any final changes before the manuscript is published.