Scanning Electron Microscope and Microhardness Evaluation of GIC Sealant Application After Different Enamel Treatment Procedures

Öz

Purpose: The aim of this in vitro study was to investigate the effect of a high fluoride containing glass ionomer sealant (GIC) material (Fuji Triage/GC Europe N.V) on the hardness of the fissure enamel and its adaptation by implementing different surface preparation techniques to increase its retention. Material and Methods: Eighty freshly extracted non-carious human molar teeth were divided into four groups: (Gp1) Air-abrasion was applied Mach 4.1 (Kreativ Inc, USA) then fissures were conditioned with 20 % polyacrylic acid (Cavity conditioner/ GC Europe N.V) and sealed with Fuji Triage; (Gp2) Er,Cr:YSGG Laser were applied (Biolase Tech., San Clemente, USA) then fissures were conditioned with 20 % polyacrylic acid and sealed with Fuji Triage; (Gp 3) 20% polyacrylic acid application and fissures sealed with Fuji Triage; (Gp4) No pretreatment. Material was directly applied (control). Teeth were left in artificial saliva for three months. Then samples were sectioned buccolingually and micro-hardness measurements were carried out using Vickers apparatus. Three samples out of each treatment group was examined in Scanning Electron Microscope at x75 and x500 magnifications. Results: Scanning Electron Microscope images illustrated better adaptation of the glass ionomer cement material to the fissures when applied after Laser treatment. Conclusion: This in vitro study showed that treating enamel with laser or air abrasion before the glass ionomer sealant application effected adhesion to enamel and GIC with higher fluoride content seemed to improve enamel hardness of the fissure enamel.

Anahtar Kelimeler

• Glass ionomer sealant, microhardness, scanning electron microscope, laser, air-abrasion

Farklı Yüzey Hazırlama Teknikleri Kullanarak Uygulanan Cam İyonomer Esaslı Fissür Örtücünün Mine Mikrosertliğine Etkisinin ve Mineyle Bağlantısının Tarayıcılı Elektron Mikroskop Altında İncelenmesi

Öz

Amaç: Bu çalışmanın amacı, yüksek oranda fluorid içeren cam iyonomer esaslı fissür örtücü materyalinin (Fuji Triage/GC Europe N.V) retansiyonunu arttırmak için farklı yüzey hazırlama teknikleri uygulayarak, çürüksüz mine mikrosertliğine ve adaptasyonuna etkisini in-vitro olarak incelemektir. Gereç ve yöntem: Çekilmiş 80 adet çürüksüz insan 3. büyük azı dişi dört gruba ayrıldı: (Gp1) Air-abrazyon Mach 4.1 (Kreativ Inc, ABD) + %20 poliakrilik asit (Cavity conditioner/ GC Europe N.V) + Fuji Triage; (Gp2) Er,Cr:YSGG lazer (Biolase Tech., San Clemente, USA) + %20 poliakrilik asit + Fuji Triage; (Gp3) %20 poliakrilik asit + Fuji Triage; (Gp4) Fuji Triage materyali direkt olarak uygulandı (kontrol). Dişler üç ay süre ile yapay tükürükte bekletildi. Üç ay sonunda bukko lingual yönde kesit alındı; bir yüzeyinde Vickers yöntemiyle sertlik ölçümü yapıldı. Her gruptan ikişer örnek taramalı elektron mikroskobu ile x75 ve x500 büyütme altında incelendi. Bulgular: Grupların tamamında materyale yakın mikrosertlik değerlerinin ortalaması, materyale uzak mikrosertlik değerlerinin ortalamasından istatistiksel olarak anlamlı derecede yüksek bulundu (p<0,05). Gruplar arası anlamlı bir fark tespit edilmedi. Taramalı elektron mikroskobu incelemelerine göre lazer uygulanan grupta materyal mine bağlantısının daha iyi olduğu saptandı. Sonuç: Bu in-vitro çalışma; cam iyonomer esaslı fissür örtücü uygulaması öncesi minenin lazer veya airabrazyonla pürüzlendirilmesinin materyalin mineye adezyonunu ve yüksek fluorid içeren CİS materyalinin, mine mikrosertliğini arttırdığını göstermektedir.

Anahtar Kelimeler

• Cam iyonomer fissür örtücü, mikrosertlik, taramalı elektron mikroskobu, lazer, airabrazyon

Kaynakça

1. Bratthall D. Dental caries: intervenedinterrupted-interpreted. Concluding remarks and cariography. Eur J Oral Sci 1996; 104: 486-91.
2. Hevinga MA, Opdam NJM, Frencken JE, BroNhorst EM, Truin GJ. Microleakage and sealant penetration in contaminated carious fissures. Journal of Dentistry 2007; 35: 909-14.
3. Celiberti P, Lussi A. Penetration of abilitiy and microleakage of a fissure sealant applied on artificial and natural enamel fissure caries. J of Dent 2007; 35:59-67.
4. Clarkson JJ, Hardwick K, Barnes D. Research Needs Workshop Report: International collaborative research on fluoride. J Dent Res 2000; 79: 893-904.
5. Herle GP, Joseph T, Varma B, Jayanthi M. Comparative evaluation of glass ionomer and resin based fissure sealant using noninvasive and invasive techniques-A SEM and microleakage study. J Indian Soc Pedo Prey Dent 2004; 22: 56Simonsen RJ. Pit and fissure sealant: review of the literature. Pediatric Dentistry 2002; 24: 3934
6. Yamamoto K, Kojima H, Tsutsumi T, Oguchi H. Effects of tooth-conditioning agents on bond strength of a resin-modified glass-ionomer sealant to enamel. Journal of Dentistry 2003; 31:13Simonsen RJ2. Glass ionomer as fissure sealant a critical review; J Public Health Dent 1996; 56, Spec No3:146-9.
7. Lussi A, Francescut P. Performance of conventional and new methods for the detection of occlusal caries in deciduous teeth. Caries Res 2003; 37:2-7.
8. Almqvist H, Lagerlöf F. Effect of intermittent delivery of fluoride to solution on root hard-tissue de- and remineralization measured by I 125 adsorptiometry. J Dent Res 1993; 72:1593-8.

9. Almqvist H, Lagerlöf F. Influence of constant fluoride levels in solution on root hard tissue deand remineralization measured by I 125 adsorptiometry. Caries Res 1993; 27: 100-5.
10. Itota T, Torii Y, Nakabo S, Tashiro Y, Konishi N, Nagamine M, Yoshiyama M. Effect of fluoridereleasing adhesive system on decalcified dentin. Journal of Oral Rehabilitation 2003; 30: 178–83.
11. Garcia-Godoy F, Abarzuna I, De Goes MF, Chan DCN. Fluoride release from fissure sealants. The Journal of Clinical Pediatric Dentistry 1997; 22: 45Helvatjoglu-Antoniades M, Karantakis P, Papadogiannis Y, Kapetanios H. Fluoride release from restorative materials and a luting cement. J Prosthet Dent 2001; 86:156-64.
12. Williams JA, Billington RW, Pearson GJ. A long term study of fluoride release from metalcontaining conventional and resin-modified glassionomer cements. J Oral Rehabil 2001; 28, 41-7.
13. Simonsen RJ. Pit and fissure sealant: review of the literature. Pediatric Dentistry 2002; 24, 5:393-414.
14. Taifour D, Frencken JE, van’t Hof MA, Beiruti N, Truin GJ. Effects of glass ionomer sealants in newly erupted first molars after 5 years: a pilot study. Community Dent Oral Epidemiol 2003; 31:314-9.
15. Tanumiharja M, Burrow MF, Cimmino A, Tyas MJ. The evaluluation of four conditioners for glass ionomer cements using field-emission scanning electron microscopy. Journal of Dentistry 2001; 29:131-8.
16. Haznedaroğlu E., Menteş A., Tanboğa İ. In Vitro Evaluation of Microleakage Under a Glass Ionomer Surface Protector Cement After Different Enamel Treatment Procedures. OHDM 2012; 11:16-22.
17. Süsal S. Klas V kavitelere değişik yöntemlerle uygulanan cam iyonomer kaide simanın dentin mikrosertliğine ve adaptasyonuna etkisinin in vitro olarak incelenmesi. M Ü Sağlık Bilimleri Enstitüsü, Doktora tezi, İstanbul, (Danışman: Prof. Dr. Ali Menteş) 2007
18. Şıracı E, Turgut MD. Süt dişlerinde asitle pürüzlendirme. TDB Derg 2004; 82:26-8.
19. Mount GJ. Adhesion of glass-ionomer cement in the clinical environment. Oper Dent 1991; 16: 141Ngo H, Mount GJ, Peters MC. A study of glassionomer cement and its interface with enamel and dentin using a low-temperature, highresolution scanning electron microscopic technique. Quintessence Int 1997; 28:63-9.
20. Papacchini F, Goracci C, Sadek FT, Monticelli F, Garcia-Godoy F, Ferrari M. Microtensile bond strength to ground enamel by glass-ionomers, resin-modified glass-ionomers, and resin composites used as pit and fissure sealants. Journal of Dentistry 2005; 33:459-67.
21. Markovic DL, Petrovic BB, Peric TO. Fluoride content and recharge ability of five glassionomer dental materials. BMC Oral Health 2008; 8:21-8.
22. Hossain M, Nakamura Y, Yamada Y, Murakami Y, Matsumoto K. Microleakage of composite resin restoration in cavities preparerd by Er, Cr: YSGG lazer irradiation and etched bur cavities in primary teeth. J Clin Pediat Dent 2002; 26: 263
23. Tengrungsun T, Smithrithee S, Vongsavan N, Chuckpaiwong S, Vongsavan K. Investigation of Er:YAG lazer etching on enamel–sealant interface in vitro SEM study. International Congress Series 2003; 1248: 201-8. Yazışma Adresi: Yrd. Doç. Dr. Eda Haznedaroğlu
24. Marmara Üniversitesi Diş Hekimliği Fakültesi Pedodonti Anabilim Dalı Büyük Çiftlik Sok. No:6 Nişantaşı-Şişli-İstanbul Tel: [phone] e-mail: [e-mail]